Résumé du contenu de la page N° 1
LCD MONITOR
LL-T2000A
OPERATION MANUAL
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
Table of Contents Notice for Users in the USA ............................................................................................................................ 4 Notice for Users in Europe .............................................................................................................................. 5 Notice for Users in the UK ............................................................................................................................... 6 Notice for Use
Résumé du contenu de la page N° 4
Notice for Users in the USA FCC Statement WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user's authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Résumé du contenu de la page N° 5
Notice for Users in Europe This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE. Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG, gewijzigd door 93/68/ EEG. Dette udstyr overholder
Résumé du contenu de la page N° 6
Notice for Users in the UK FOR CUSTOMERS IN U.K. IMPORTANT The wires in this mains lead are coloured in accordance with the following code : GREEN-AND-YELLOW : Earth BLUE : Neutral BROWN : Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows. The wire which is coloured GREEN- AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the safe
Résumé du contenu de la page N° 7
Tips and safety precautions The Power Cord - Under certain display conditions, minute specks - Do not damage the power cord nor place heavy or spots may be noticeable. This is common for objects on it, stretch it or overly bend it. Also, do liquid crystal monitors and is not a malfunction. not add extension cords. Damage to the cord - The LCD panel has been manufactured using may result in fire or electric shock. highly elaborate technology. Properly working - Use only the AC adapter supplied wi
Résumé du contenu de la page N° 8
Product description Front view Power button (p. 12) This button switches the monitor ON and OFF. Control Panel Power LED (p. 12) Green light: In use Orange light: Power saving mode or signal failure Lamp off: Power OFF buttons When the On Screen Display (OSD) Menu is displayed: These buttons are used to increase or decrease the value of a selected option. (p. 18) When the OSD Menu is not displayed: These buttons are used to adjust backlight brightness (p. 17). SELECT button (p. 18) This button i
Résumé du contenu de la page N° 9
Product description Front view Note: Never block the ventilation Ventilation openings as this may lead to openings overheating inside the monitor and result in malfunction. Power terminal (p. 10) Remove the cover to see the power terminal. The AC adapter is connected here. INPUT 2 terminal and USB port Remove the cover to view the computer input terminal (INPUT 2) and USB port. INPUT 2 terminal (p. 11) A second computer can be connected Ventilation here. openings USB port: Downstream (Port 2) (p
Résumé du contenu de la page N° 10
Connecting the monitor and turning the monitor on and off 5. Connect power cord to AC adapter. Connecting the monitor to a power source Use only the AC adapter supplied. Note: - Do not overly bend the cable or add extension Power cord cords as this could lead to malfunction. 1. Remove the stand cover. (Rear View) Stand cover Fitting the AC adapter inside the stand Lift one side Wind the cord 2. Remove the cover. Place adapter Cover inside stand cavity. 6. Replace stand cover. Stand cover 2 3. Co
Résumé du contenu de la page N° 11
Connecting the monitor and turning the monitor on and off Connecting the monitor to a computer Connecting to a second computer (PC etc.) A RGB signal cable (to be purchased separately) is needed to connect a second computer. When connecting, ensure that both the monitor and computer are switched off. Note: - Do not overly bend the cable or add extension Note: cords as this could lead to malfunction. - Do not overly bend the cable or add extension cords as this could lead to malfunction. 1. Remov
Résumé du contenu de la page N° 12
Connecting the monitor and turning the monitor on and off Notes: Turning the power on - Before connecting, ensure that the shape of the USB cable connector is correct. 1. Turn on the computer. - For information regarding the USB function (such 2. Press the monitor's power button. The power as set-up) please refer to the operation manual of LED will be lit green, and the screen will display the computer to be connected. an image. - Some computers, OS and other devices may not be able to be activa
Résumé du contenu de la page N° 13
Connecting the monitor and turning the monitor on and off Installing set-up information and the ICC profile [ For Windows98 ] (for Windows) Installing monitor set-up information into Windows Depending on the computer or OS, it may be neces- 98, and setting the monitor's ICC profile as a prede- sary to use the computer to operate the installation termined value. of monitor set-up information etc. If so, follow the This explanation assumes that the floppy disk drive steps below to install the moni
Résumé du contenu de la page N° 14
Connecting the monitor and turning the monitor on and off 1. Place the Utility Disk (provided) into the If the "Add New Hardware Wizard" has not ap- computer's A drive. peared: 2. Click on the [Start] button. From [Settings], 1. Place the Utility Disk (provided) into the choose [Control Panel]. computer's A drive. 3. Double click on [Display]. 2. Click on the [Start] button. From [Settings], 4. Click on [Settings], [Advanced] and [Monitor]. choose [Control Panel]. 5. Click on [Properties], [Driv
Résumé du contenu de la page N° 15
Connecting the monitor and turning the monitor on and off Installing ColorSync profile (for MacOs) Turning the power off About ColorSync profiles 1. Turn the computer off. ColorSync is the color management system of 2. Press the monitor's power button. Apple Computer, Inc.ColorSync is the function to The Power LED will disappear. realize color reappearance with the application which coped with it.A ColorSync profile is a file CAUTION! that describes the color characteristics of the Do not leave
Résumé du contenu de la page N° 16
Adjusting the screen display If necessary, the screen can be adjusted as follows. Adjustment lock function Automatic screen adjustment (p. 17) By disabling the control buttons (i.e. setting the lock) The CLOCK, PHASE, H-POS (horizontal position- any attempted changes to adjusted values will be ing) and V-POS (vertical positioning) functions can voided. be adjusted automatically. 1. Turn off the monitor power. Adjustment of backlight (p. 17) 2. While pressing the MENU button, press the Brightness
Résumé du contenu de la page N° 17
Adjusting the screen display Adjusting the screen automatically Automatic screen adjustment 1. Press the MENU button. The ADJUSTMENT Menu will be displayed. Options in MENU 1 (ADJUSTMENT) can be ad- justed automatically (CLOCK, PHASE, H-POS, V- POS). Note: - When setting up the monitor or a connected computer for the first time, connecting an additional computer or after having changed an 2. Press the button. aspect of the current system, perform an The screen will become dark and [ADJUSTING] a
Résumé du contenu de la page N° 18
Adjusting the screen display MENU 1: ADJUSTMENT Manual screen adjustment Fine adjustments can be made using the On Screen Display (OSD) Menu provided. The screen display during adjustment If using Windows, the Adjustment Pattern on the accompanying Utility Disk for Windows can be used. (p. 17) MANUAL: Individual menu options are manually If using a computer other than Windows, the adjust- adjusted. AUTO: Every menu option is automatically ment pattern cannot be used. Display an image that makes
Résumé du contenu de la page N° 19
Adjusting the screen display MENU 2: GAIN CONTROL MENU 3: WHITE BALANCE BRIGHT (brightness) and CONT (contrast) are WHITE BALANCE can be adjusted as necessary. optimized before shipment, but depending on the (As adjustments are made before shipment, there is type of computer being used, further adjustment no real necessity for further alteration.) may be necessary. Notes: MANUAL: Individual menu options are manually - On settings other than [STD] not all graduations adjusted. can be displayed. T
Résumé du contenu de la page N° 20
Adjusting the screen display MENU 4: MODE SELECT LEVEL (Level of scaling) The resolution can be adjusted When EXPAND is ON1 or ON2, the sharpness of the image can be adjusted. ( buttons) Note: - When EXPAND is OFF, no adjustments can be made. COLOR MODE OFF It is indicated in the color of the LCD Notes: monitor origin. - To choose a menu option: SELECT button ON It is corrected in the more suitable color, - When adjustment complete: MENU button and indicated in the computer image. OSD H-PO
