Résumé du contenu de la page N° 1
SyncMaster B1740R/ B1740RX/ B1940M/ B1940MX/ B1940R/ B1940RX/ B1940MR/
B1940MRX/ B1940W/ B1940WX/ B2240/ B2240X/ B2240W/ B2240WX/
B2240M/ B2240MX/ B2240MW/ B2240MWX/ BX2240/ BX2240X/ B2340/
B2440L/ B2440LX/B2440/ B2440X/ B2440M/ BX2440/ BX2440X/
E1720NR/ E1720NRX/ E1920/ E1920X/ E1920R/ E1920N/ E1920NX/
E1920NR/ E1920NRX/ E1920NW/ E1920NWX/ E1920W/ E1920WX/
E2020/ E2020X/ E2020N/ E2020NX/ E2220/ E2220X/ E2220N/ E2220NX/
E2220NW/ E2220W/ E2220WX/ EX2220/ EX2220X/ E2320/ E2320X/
E2420L/ E24
Résumé du contenu de la page N° 2
Table Of Contents MAJOR SAFETY PRECAUTIONS Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Custody and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 INSTALLING THE PRODUCT Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Installing the S
Résumé du contenu de la page N° 3
Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30 Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-31 Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-32 Standard Signal Mode Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-33 Installing the Device Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-34 Product Ope
Résumé du contenu de la page N° 4
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-31 Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-32 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-33 Power Saving Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-34 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 5
1 Major Safety Precautions 1-1 Before You Start Icons used in this manual Icon Name Meaning Caution Indicates cases where the function may not work or the setting may be canceled. Note Indicates a hint or tip to operate a function. Using this Manual • Make yourself fully aware of the safety precautions before using this product. • If a problem occurs, refer to the 'Troubleshooting' section. Copyright Notice The contents of this manual are subject to change without prior notice for performance im
Résumé du contenu de la page N° 6
1-2 Custody and Maintenance External Surface and Screen Maintenance Clean the product with a soft dry cloth. • Do not clean the product with an inflammable substance such as benzene or thinner or with a wet cloth. This may result in a problem with the product. • Do not scratch the screen with your fingernails or a sharp object. This may result in scratches or damage to the product. • Do not clean the product directly by spraying water onto the product. If water enters the product, it may res
Résumé du contenu de la page N° 7
1-3 Safety Precautions Icons used for safety precautions Icon Name Meaning Failing to follow the precautions marked with this sign, may result in a serious injury or Warning even a fatality. Failing to follow the precautions marked with this sign, may result in a personal injury or Caution property damage. Meaning of Signs Do not perform. Must be followed. The power plug must be unplugged from the Do not disassemble. wall outlet. Do not touch. Must be grounded to prevent electric shock. P
Résumé du contenu de la page N° 8
Caution Avoid unplugging the power plug while the Make sure to use only the power cord sup- product is operating. plied by our company. In addition, do not use the power cord of another electric appli- • Otherwise, it may damage the product ance. due to electric shock. • Otherwise, it may result in electric shock or fire. When unplugging the power plug from the Connect the power plug to a wall outlet that wall outlet, make sure to hold it by the plug can be easily reached. and not by the
Résumé du contenu de la page N° 9
Avoid installing the product in a location Avoid installing the product in a location exposed to dust, moisture (sauna), oil, exposed to direct sunlight and installing the smoke or water (rain drops) and installing it product near a heat source such as a fire or within a vehicle. heater. • This may result in electric shock or fire. • This may shorten the product life cycle or cause fire. Avoid installing the product at an easily reachable height where children may reach it. • If a child
Résumé du contenu de la page N° 10
Before cleaning the product, unplug the When cleaning the product, do not spray power cord. water directly over the product parts. • Otherwise, it may result in electric shock • Make sure that water does not enter the or fire. product. • Otherwise, it may result in fire, electric shock or a problem with the product. Caution Avoid spraying cleansing agent directly onto When cleaning the product, disconnect the the product. power cord and clean the product with a soft dry cloth. • This ma
Résumé du contenu de la page N° 11
When thunder or lighting occurs, unplug the Avoid dropping an object over the product power cord and under no circumstance or cause impact to the product. touch the antenna cable as this is danger- • Otherwise, it may result in electric shock ous. or fire. • Otherwise, it may result in electric shock or fire. Avoid moving the product by pulling the When a gas leak occurs, do not touch the power cord or antenna cable. product or the power plug and ventilate immediately. • Otherwise, it may r
Résumé du contenu de la page N° 12
Watching the product from too close a dis- Avoid using a humidifier or cooker near the tance continuously may damage your eye- product. sight. • Otherwise, it may result in electric shock or fire. It is important to give your eyes some rest (5 Since the display panel is hot after using it minutes every hour) when viewing the prod- for a long time, do not touch the product. uct screen for long periods of time. • This will alleviate any eye strain. Keep small accessories away from the chil- Tak
Résumé du contenu de la page N° 13
2 Installing the Product 2-1 Package Contents • Unpack the product and check if all of the following contents have been included. • Store the packaging box in case you need to move the Product at a later stage. Type 1 Monitor & HAS stand Contents Product Warranty Installation Manual User Manual D-Sub Cable (Not available in all locations) Power Cord Stand OPTIONAL PARTS HDMI Cable DVI Cable Cleaning Cloth Stereo Cable The cleaning cloth is supplied with black high-glossy models only. I
Résumé du contenu de la page N° 14
Type 2 Monitor & Simple stand MagicRotation program can not be provided as Simple Stand does not support Pivot function. Contents Product Warranty Installation Manual User Manual D-Sub Cable (Not available in all locations) Power Cord Stand Stand Connector OPTIONAL PARTS HDMI Cable DVI Cable Cleaning Cloth Stereo Cable The cleaning cloth is supplied with black high-glossy models only. 2-1 Installing the Product
Résumé du contenu de la page N° 15
2-2 Installing the Stand Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. HAS stand Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards. Do not remove the stopper pin before installing the base. Hold the main body of the product with your hand as shown by the figure. Insert the stand base into the stand connection part
Résumé du contenu de la page N° 16
After the installation of the base, stand the monitor up as shown in the figure. Now you can remove the stopper pin to adjust the stand. - Caution Avoid lifting the product holding only the stand. Disassembly is in the reverse order of the assembly. When pivot the monitor from horizontal to vertical,tilt the monitor backward to maxium first. . Stand Stopper 2-2 Installing the Product
Résumé du contenu de la page N° 17
Simple stand Insert the Stand Connector into the Stand in the direction shown by the figure. Check if the Stand Connector is firmly connected. Turn the connecting screw at the bottom of the stand fully so that it is completely fixed. Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards. Installing the Product 2-2
Résumé du contenu de la page N° 18
Hold the main body of the product with your hand as shown by the figure. Push the assembled stand into the main body in the direction of the arrow as shown in the figure. - Caution Avoid lifting the product holding only the stand. Disassembly is in the reverse order of the assembly. 2-2 Installing the Product
Résumé du contenu de la page N° 19
2-3 Installing the Stand for the Wall Mount This product provides a stand mount of 75 mm x 75 mm(3.0 x 3.0 inches) that complies with the VESA specifications. HAS stand Simple stand Stand Mount Stand (Optional) 1. Turn the product off and unplug the power cord from the wall outlet. 2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product down on the cloth so that the front of the product faces downwards. 3. Separate the stand. 4. Align the groove of the pa
Résumé du contenu de la page N° 20
engineer. • When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm of space from the wall. • The company shall not be held liable for any problems caused by using a stand that is not compatible with the specified specifications. • Use the wall mount according to the international specifications. 2-3 Installing the Product
