Instruction d'utilisation Pelco PMCS15A

Résumé du contenu de la page N° 1

Installation/Operation
PMCS15A, PMCS17A, and PMCS19A
Super-High Resolution Color Monitors
C1991M-C (9/04)
Pelco • 3500 Pelco Way • Clovis, CA 93612-5699 USA • www.pelco.com
In North America and Canada: Tel (800) 289-9100 or FAX (800) 289-9150
International Customers: Tel +1 (559) 292-1981 or FAX +1 (559) 348-1120

Résumé du contenu de la page N° 2

IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the pola

Résumé du contenu de la page N° 3

REGULATORY NOTICES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference re- ceived, including interference that may cause undesired operation. RADIO AND TELEVISION INTERFERENCE This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid

Résumé du contenu de la page N° 4

INSTALLATION The monitor may be placed on any flat surface (desk or table) or rack-mounted. To rack-mount the monitor follow the instructions supplied with the rack mount kit. Video and Power Connections 1. Video Cable Connection (Refer to Table A for video coaxial cable requirements.) a. Connect the video cable to the BNC video input labeled V1 IN on the back panel of the monitor. If the installation requires a second video input, connect a video cable to the BNC video input la- beled V2 IN. b.

Résumé du contenu de la page N° 5

Table A. Video Coaxial Cable Requirements Cable Type* Maximum Distance RG59/U 750 ft (229 m) RG6/U 1,000 ft (305 m) RG11/U 1,500 ft (457 m) * Minimum cable requirements: 75 ohms impedance All-copper center conductor All-copper braided shield with 95% braid coverage V1-H V1-L V1 IN V2 IN AU1 IN AU2 IN S-VHS IN V2-H S-HI CAMERA CAMERA V2-L S-LO V1 OUT V2 OUT AU1 OU T AU2 OUT S-VHS OU T VCR VCR Figure 2. Looping Operation - One Monitor with External Video Equipment CAMERA V1-H V1-H V1-H V1-L V1-L

Résumé du contenu de la page N° 6

OPERATION 1. Set the video format switch located on the front panel to one of the following settings: VIDEO1 - Composite video (NTSC/PAL) mode VIDEO2 - Composite video (NTSC/PAL) mode for two, video input operation S-VIDEO - S-VHS mode if the S-VHS input jack on the back of the monitor is used 2. If required adjust the picture using the control knobs on the front panel. Front Panel Adjustments TINT Color phase adjustment. Turn clockwise to increase the greenish tones in the picture. Turn counter

Résumé du contenu de la page N° 7

SPECIFICATIONS ELECTRICAL Input Voltage 90-260 VAC, 50/60 Hz, autoranging Power Consumption PMCS15A 70 watts PMCS17A 95 watts PMCS19A Approximate 100 watts Horizontal Resolution PMCS15A 700 TV lines PMCS17A 700 TV lines PMCS19A 800 TV lines Visual Picture Size PMCS15A 14-inch diagonal PMCS17A 16-inch diagonal PMCS19A 18-inch diagonal Sweep Linearity 10% Speaker Output 1.0 watt (-3 dBV) GENERAL Input/Output Video 2 BNC inputs: 75 ohms or Hi-Z 2 looping outputs Audio 2 RCA inputs, Hi-Z 2 looping o

Résumé du contenu de la page N° 8

PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products. ® • Three years on Genex Series products (multiplexers, server, and keyboard). ® • Three years on Camclosure and fixed camera models, except the CC3701H-2, CC3701H-2X, CC3751H-2, CC3651H-2X,