Résumé du contenu de la page N° 1
User’s Guide
Shop online at
omega.com
e-mail: info@omega.com
For latest product manuals:
omegamanual.info
L LD DP P6 63 31 10 00 0
Extra L Large D Display
LP0689X
Résumé du contenu de la page N° 2
® OMEGAnet Online Service Internet e-mail omega.com info@omega.com Servicing North America: U.S.A.: One Omega Drive, P.O. Box 4047 ISO 9001 Certified Stamford, CT 06907-0047 TEL: (203) 359-1660 FAX: (203) 359-7700 e-mail: info@omega.com Canada: 976 Bergar Laval (Quebec) H7L 5A1, Canada TEL: (514) 856-6928 FAX: (514) 856-6886 e-mail: info@omega.ca For immediate technical or application assistance: ® U.S.A. and Canada: Sales Service: 1-800-826-6342/1-800-TC-OMEGA ® Customer Service: 1-800-622-2378
Résumé du contenu de la page N° 3
LARGE LED DISPLAY READABLE TO 180 FEET VARIOUS ANALOG INPUT MODULES; DC VOLTAGE AND CURRENT PROCESS SIGNALS TRUE RMS VOLTAGE AND CURRENT U THERMOCOUPLE OR RTD R C L US LISTED STRAIN GAGE/BRIDGE IND. CONT. EQ. 51EB ALARMS, ANALOG OUTPUT, AND COMMUNICATION PROGRAMMABLE USER INPUTS UNIVERSAL AC POWERED (85 to 250 VAC) PROGRAMMING SOFTWARE NEMA 4X/IP65 GENERAL DESCRIPTION SPECIFICATIONS The LDP63100 is a versatile display that can increase productivity by Input specifications, wiring, and pro
Résumé du contenu de la page N° 4
5. CERTIFICATIONS AND COMPLIANCES: 8. MODULE INSTALLATION: SAFETY 24-pin shrouded connector on LDP63100 engages connector on input module UL Recognized Component, File #E313607, UL61010A-1, CSA C22.2 upon installation. Shroud ensures proper alignment by providing a lead-in for No. 1010-1 the module connector. Recognized to U.S. and Canadian requirements under the Component 9. CONNECTIONS: Wiring connections are made to the LDP63100 terminal Recognition Program of Underwriters Laboratories, Inc.
Résumé du contenu de la page N° 5
1.0 ASSEMBLING THE DISPLAY CAUTION: The input module main circuit board and the option WARNING: Exposed line voltage exists on the input module main cards contain static sensitive components. Before handling the circuit board and the option cards. DO NOT apply power to the module or the cards, discharge static charges from your body by module OR load circuits until the module is properly installed touching a grounded bare metal object. Handle the module by in the LDP63100 case. the rear plastic
Résumé du contenu de la page N° 6
2.0 INSTALLING THE DISPLAY DISPLAY INSTALLATION The LDP63100 display is intended to be mounted into a panel or enclosure. The display is DIMENSIONS In inches (mm) provided with a gasket to provide a water-tight seal. The recommended minimum panel thickness for NEMA 4/IP65 sealing is 0.060" (1.57 mm). For panel mounting, prepare the panel cut-out to the dimensions shown in Figure 3. The supplied template may be used to mark the cut-out and hole locations on the panel. After the panel cut-out ha
Résumé du contenu de la page N° 7
3.0 WIRING AND PROGRAMMING THE DISPLAY Once assembled, the LDP63100 has all the same functions and capabilities of our DP63500, DP63600, and DP63700 Series Intelligent Panel Meters. Therefore, you will find the appropriate meter information packed with the LDP63100. Simply follow the instructions to wire and program the display for your application. Note: Both the LDP63100and the inputmodule require power. It is recommended to connect the primary AC power to the LDP63100 terminal block, then jum
Résumé du contenu de la page N° 8
NEMA 4/IP65 LARGE DISPLAY ENCLOSURE & SHROUD FOR LDP63100 LIGHT-WEIGHT ALUMINUM CONSTRUCTION COMPLETELY SEALED FOR WASH-DOWN MOUNTING CHANNELS FOR VERSATILE INSTALLATION DESCRIPTION The NEMA 4/IP65 Large Display Enclosure is designed to protect the LDP63100 from dust and hose directed water, when properly installed. This light-weight all aluminum unit utilizes welded seams and neoprene gaskets to meet NEMA 4/IP65 requirements. A textured, polyurethane coating protects against corrosion and is
Résumé du contenu de la page N° 9
ASSEMBLY AND INSTALLATION PROCEDURE 1. Install the two mounting channels on the enclosure housing using the four #8-32 screws provided and then insert the strut nuts (provided). Invert enclosure if base mounting. 2. If the wiring is to be routed through the housing, make sure that the mounting channels are oriented properly before drilling, so the Display will be readable. Wiring is generally brought into the right side of the housing or rear panel, closest to the terminals of the input module.
Résumé du contenu de la page N° 10
PARTNUMBERINFORMATION DESCRIPTION PART NUMBERS Temperature Input, 85-250 VAC power LDP63100-T Universal DC Inputs, 85-250 VAC power LDP63100-DC True RMS AC Current and Volt Inputs, 85-250 VAC power LDP63100-AC Process Input, 85-250 VAC power LDP63100-E Strain Gage Input, 85-250 VAC power LDP63100-S ACCESSORIES DESCRIPTION PART NUMBERS NEMA 4 Enclosure LDP6-ENC12 NEMA 4 Enclosure With Shroud LDP6-EN/SH Programming Remote LDP6-PGM Shroud LDP631-SHR
Résumé du contenu de la page N° 11
WARRANTY/DISCLAIMER OMEGA ENGINEERING, INC. warrants this unit to be free of defects in materials and workmanship for a period of 25 months from date of purchase. OMEGA’s WARRANTY adds an additional one (1) month grace period to the normal two (2) year product warranty to cover handling and shipping time. This ensures that OMEGA’s customers receive maximum coverage on each product. If the unit malfunctions, it must be returned to the factory for evaluation. OMEGA’s Customer Service Department w
Résumé du contenu de la page N° 12
Where Do I Find Everything I Need for Process Measurement and Control? OMEGA…Of Course! Shop online at omega.com TEMPERATURE ] Thermocouple, RTD & Thermistor Probes, Connectors, Panels & Assemblies ] Wire: Thermocouple, RTD & Thermistor ] Calibrators & Ice Point References ] Recorders, Controllers & Process Monitors ] Infrared Pyrometers PRESSURE, STRAIN AND FORCE ] Transducers & Strain Gages ] Load Cells & Pressure Gages ] Displacement Transducers ] Instrumentation & Accessories FLOW/LEVEL ] Ro
