Résumé du contenu de la page N° 1
LCD1280 10/29/99 9:25 AM Page 1
13" True Color TFT LCD Monitor
User’s Manual
13" True Color TFT LCD Monitor
NEC Technologies, Inc.
Part No.
1255 N. Michael Drive
Printed in U.S.A.
Wood Dale, Illinois 60191-1094
Résumé du contenu de la page N° 2
LCD1280 10/29/99 9:25 AM Page 2 Information for LCD1280 FCC Rules. These limits are designed to provide reasonable WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN protection against harmful interference when the equipment is OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN operated in a commercial environment. This equipment gener- EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN ates, uses, and can radiate radio frequency energy
Résumé du contenu de la page N° 3
LCD1280 10/29/99 9:25 AM Page 3 Introduction formance necessary for today’s sophisticated Windows, Contents of Package Macintosh, Silicon Graphics, Sun and other workstation Congratulations on your purchase of the NEC LCD1280™ applications. True Color monitor! In addition to offering support for VGA graphics mode Included with your LCD1280 monitor are the following items: (640 x 480), the LCD1280 supports WS high resolution 1. NEC LCD1280 (Model #LA-1331JSW) True Color monitor. mode (1280 x 1
Résumé du contenu de la page N° 4
LCD1280 10/29/99 9:25 AM Page 4 Introduction Low Power Consumption The LCD1280 has been designed with NEC’s IPM™ (Intelligent different IPM modes. The following is the description of the Power Manager) System. When utilized with an Energy Star LED indicator for the IPM power saving modes: system or video card, the LCD1280's IPM System is an innova- Mode LED Indicator Power Consumption tive power saving utility that complies with both the EPA’s ON Green Typical: 45 watts Energy Star requireme
Résumé du contenu de la page N° 5
LCD1280 10/29/99 9:25 AM Page 5 Introduction LCD1280 Specifications Display Colors: Unlimited colors (depends on graphics interface and/or application) User Controls: Power, brightness, horizontal position, vertical position, clock delay adjust Signal Cable: 15-pin mini D-sub male to 5 branched BNC male Power Supply: AC 90 to 264 V worldwide input, 48 to 62 Hz Power Consumption: Typical: 45 watts in ON mode, Under 8 watts in power saving mode. Dimensions (W, H, D): 344 x 325 x 171 mm/13.5 x 12
Résumé du contenu de la page N° 6
LCD1280 10/29/99 9:25 AM Page 6 Installation 5. Make sure the appropriate BNC cable is used. Should the Connect the red BNC cable to the BNC connector on the graphics adapter require a connector other than the 15 pin monitor labeled R. The green BNC cable should be connec- mini D-sub male included with the monitor, please call NEC ted to the BNC connector on the monitor labeled G. The at (800) 820-1230. Connect cable to system. blue BNC cable should be connected to the BNC connector on t
Résumé du contenu de la page N° 7
LCD1280 10/29/99 9:25 AM Page 7 Controls Fine VGA Horizontal Adjust (V-H2): fine adjustment for horizontal position of VGA mode (2 pixel / 1 dot increment per operation). Rough VGA Vertical Adjust (V-V1): rough adjustment for vertical position of VGA mode (32 pixel / 16 line increment per operation). Fine VGA Vertical Adjust (V-V2): fine adjustment for vertical position of VGA mode (2 pixel / 1 line increment per operation). 8 Troubleshooting/Support Problem Check These Items No Picture • T
Résumé du contenu de la page N° 8
LCD1280 10/29/99 9:25 AM Page 8 Troubleshooting/Support Technical Support FastFacts™ FastFacts system is an easy-to-use, automated facsimile If the problem persists, call NEC Technologies, Inc. at service that provides you with information whenever you (800) 388-8888. Before you call, please follow these need it, 24 hours a day, seven days a week. You can call instructions to allow for faster service: the FastFacts system with your touchtone telephone, order a • Call from a location at or n
Résumé du contenu de la page N° 9
LCD1280 10/29/99 9:25 AM Page 9 Troubleshooting/Support Limitation of Damages and Implied For Information, Telephone 1-800-388-8888 Warranties NOTE: All Products returned to NECTECH for service MUST have prior approval; this may be obtained by call- NECTECH’S SOLE LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE PRODUCT ing the above number. AT OUR OPTION. NECTECH SHALL NOT BE LIABLE FOR: This Product is warranted in accordance with the terms of 1. DAMAGE
Résumé du contenu de la page N° 10
LCD1280 10/29/99 9:25 AM Page 10 Appendix 2 Signal Timings Input Signal Timings (WS High Resolution Mode) Item Abbreviation Monitor Rating Pixel frequency fc 107.5MHz ± 50ppm 9.302nsec/pixel 107.352HHz ± 50ppm 9.315nsec/pixel Horizontal frequency fh 64.60KHz 63.9KHz Line Time total Th 15.479usec 1664CLK 15.649esec 1680CLK Horizontal active display Thd 11.907usec 1280CLK 11.923usec 1280CLK Horizontal sync pulse Thp 1.786usec 192CLK 1.118usec 120CLK Horizontal baack porch Thb 1.488usec 160CLK 2
Résumé du contenu de la page N° 11
LCD1280 10/29/99 9:25 AM Page 11 Appendix 2 H-Video V-Video Tvd Thd Horizontal Vertical Thp Thb Thf Tvp Tvb Tvf Th Tv Fig. A2-1: Horizontal Timing Fig. A2-2: Vertical Timing V sync H sync Th H sync 2.0V 0.8V Thrf Thrf Fig. A2-3: Sync Timing 16 Appendix 3 Signal levels Min. Typ. Max. Video Swing (White – Blank: W/O Sync process) – – 0.765V Setup level (Black – Blank) 0.035V 0.054V 0.072V White level (White – Black) 0.627V 0.660V 0.694V Video input offset (VAIO) .05V – 0.5V White Level White Lev
Résumé du contenu de la page N° 12
LCD1280 10/29/99 9:25 AM Page 12 References Analog Interface 1 Remote Bulletin Board System (BBS) 10 BNC Cables 5 Resolution 1, 3 Brightness Control 7 Separate Sync 6, 13 Compatibility 1, 3, 5 Signal Levels 17 Composite Sync 6, 13 Signal Timings 14, 15 Dimensions 4 Specifications 3, 4 Display Area 1, 3 Sync on Green 6, 13 Display mode 2 SYNC Switch 5, 7 Dot Pitch 3 Synchronization Range 3 ErgoDesign 2 Technical Support 10 FastFacts 5, 10 Tilt Base 2, 4 FCC IFC Timing Charts 14, 15 Focus 9 Trou
