Résumé du contenu de la page N° 1
AUTO-SCANNING WITH DIGITAL CONTROL
COLOR DISPLAY MONITOR
USER’S GUIDE
For future reference, record the serial
number of your display monitor in the
space below:
Internet Home Page: http://www.necmitsubishi.com/
SERIAL No.
®
The serial number is located on the Supplying Windows 95/98/2000 INF File download service, new
rear cover of the monitor. product information, etc.
Résumé du contenu de la page N° 2
RADIO INTERFERENCE REGULATIONS STATE- As an ENERGY STAR Partner, NEC-Mitsubishi MENT FOR U.S.A. Electronics Display of America,Inc. has determined that this product meets the ENERGY STAR guide- This equipment has been tested and found to comply lines for energy efficiency. with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment gen
Résumé du contenu de la page N° 3
Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO’99 approved and labelled products may also be obtained via the Internet, using the address: Congratulations! http://www.tco-info.com/ You have just purchased a TCO’99 approved and labelled product! Your choi
Résumé du contenu de la page N° 4
ENGLISH CONTENTS 1. INTRODUCTION ..................................................... 1-2 1.1 Features ........................................................ 1-2 CAUTION 1.2 Internal Preset Memory Capability ................ 1-3 1.3 Power Management Function ....................... 1-3 The power cord provided with this monitor is de- signed for safety and must be used with a properly 1.4 DDC .............................................................. 1-3 grounded outlet to avoid possible e
Résumé du contenu de la page N° 5
1 INTRODUCTION 1 Congratulations on your purchase of the high resolution • The world's standard DIAMONDTRON NF CRT up- color monitor. We designed this monitor to provide you with graded and pure picture images. years of reliable trouble-free operation. • The monitor complies with Video Electronics Standards TM TM This guide tells you how to connect, adjust and care for your Association (VESA ) DDC 2B and 2Bi (EDID) specifi- monitor. This guide also provides technical specifications cation.
Résumé du contenu de la page N° 6
ENGLISH 1.5 Location Considerations 1.2 Internal Preset Memory Capability When setting up and using the monitor, keep the following To minimize adjustment needs, the factory has preset in mind: popular display standards into the monitor, as shown in Table 1. If any of these display standards are detected, the • For optimum viewing, avoid placing the monitor against picture size and position are automatically adjusted. All of a bright background or where sunlight or other light the factory pres
Résumé du contenu de la page N° 7
1.9 Quick Operation Chart 1.7 Unpacking To summarize the steps in connecting your computer After you unpack the box you should have all of the items with the color monitor and setting the necessary controls indicated in Figure 1. Save the box and packing materials and switches, refer to the chart below. in case you transport the monitor. 1 2 Connect the color monitor and computer with the necessary cords and cables. See Section 3. INSTALLATION AND CONNECTION 4 3 5 Turn on the color monitor.
Résumé du contenu de la page N° 8
ENGLISH 2 PART NAME 2 2.1 Control Names See Figures 3 and 4 for the location of the user controls, indicator and connectors. Each part is identified by number and is described individually. 1 1 2 4 5 3 SIGNAL A/B SIGNAL-B SIGNAL-A OSD OFF 6 8 7 9 10 Figure 4 Figure 3 2.2 Function 1. POWER SWITCH: A push-on / push-off switch for AC 5. FUNCTION ADJUST BUTTONS: Push the adjust power. buttons to adjust the image on the screen. 2. POWER-ON INDICATOR: This indicator illuminates 6. AC POWER CONNEC
Résumé du contenu de la page N° 9
3.2.2 Connecting to An Apple Macintosh Computer 3 INSTALLATION AND 3 Figure 6 shows the SC-B110 cable and AD-A205 Adapter(option) to the video port in an Apple Macintosh. CONNECTION For Macintosh Adapter AD-A205, contact your dealer. On the back of the monitor three kinds of plug-in connec- 1. Power off, both the monitor and the computer. tions are provided: AC power connector for the AC input, 2. Set the DIP switches of Macintosh Adapter according two DB9-15P connectors for video signal input,
Résumé du contenu de la page N° 10
ENGLISH 3.2.3 Connecting to two computers Figure 7 shows the connection to two computers. Refer to clause 3.2.1 or 3.2.2 for the connection procedure. SIGNAL-B SIGNAL-A Computer B Computer A Signal Cable Signal Cable Figure 7 3.3 USB System Basic Application REAR SIGNAL-B SIGNAL-A Downstream Ports USB Cable Upstream Port Signal Cable Keyboard Camera Scanner Computer ® NOTE The Computer is required to have Windows 98 or later installed and USB functions. - 1-7 -
Résumé du contenu de la page N° 11
3.4 Installation of USB Function (a) Disconnect and connect the USB cable to the up- stream port of the display monitor. (b) Cycle power of the display monitor off then on. The following procedure permits your computer to recog- nize or "enumerate"(A USB term) the USB HUB. NOTE 1. Power on the display monitor and then the com- If the mark appears with “Generic USB HUB”, then puter. enumeration was unsuccessful. Select “Generic USB ® 2. Start "Enumeration" from the Windows Desktop. HUB” m
Résumé du contenu de la page N° 12
ENGLISH 4 OSD (On Screen Display) 4 FUNCTIONS 4.1 How to adjust the screen The monitor has an OSD(On Screen Display) function. The following procedure shows how to adjust the screen using the OSD function. Group icon Main Menu Sub Menu SIGNAL A/B OSD OFF (1) Turn on the monitor by pressing (2) Display the OSD screen by pressing (3) Select the group icon on Main Menu by pressing (4) Display the Sub Menu by pressing (5) Select the item icon on Sub Menu by pressing (6) Adjust by pressing SI
Résumé du contenu de la page N° 13
4.2 Adjustment Items X: Available Press the Minus Button Press the Plus Button Group Item AB C Item Icon Icon To decrease the contrast. To increase the contrast. XX X To decrease the brightness. XX X To increase the brightness. To select preferable display color mode. And, to adjust the color balance at the (COLOR) selected color mode. XX X When selecting mode "sRGB", "COLOR TEMPERATURE", "CONTRAST" and "BRIGHT" are unavailable. To decrease the color temperature of the To indecrease
Résumé du contenu de la page N° 14
ENGLISH X: Available Press the Minus Button Press the Plus Button Item Group AB C Item Icon Icon CORNER PURITY(TL) XX X To adjust the purity condition on the top-left corner. CORNER PURITY(TR) To adjust the purity condition on the top-right corner. XX X (PURITY) CORNER PURITY(BL) XX X To adjust the purity condition on the bottom-left corner. CORNER PURITY(BR) To adjust the purity condition on the bottom-right corner. XX X MOIRE CANCEL LEVEL To decrease the level of the moire-clear wave. XX T
Résumé du contenu de la page N° 15
Before calling your Authorized Product Support, please check that the items below are properly connected or set. 5 TROUBLESHOOTING In case of using a non-standard signal, please check the 5 pin assignments and the signal timing of your computer with the specification outlined in Section 6. SPECIFICA- TIONS and Section 7. APPENDIX. ITEMS TO CHECK LOCATION PROBLEM • • Contrast and brightness controls. Front LED On (Green) • • Power switch. Front LED Off • • AC power cord disconnected. Rear No pict
Résumé du contenu de la page N° 16
ENGLISH ITEMS TO CHECK LOCATION PROBLEM Thin vertical black lines on one or both sides of the Black vertical screen. This minor condition is caused by grille element lines are visible on the screen. overlap which can occur during shipping. Position an open white window over the affected area of the screen and maximize the brightness and contrast controls. This will cause localized heating of the overlap which will clear in a few minutes. Be sure to readjust the brightness and contrast control
Résumé du contenu de la page N° 17
6 SPECIFICATIONS 6 Size 55cm/22" (508mm/20" Viewable Image Size) Mask type Aperture grille Gun In-line Deflection angle 90° CRT Phosphors Red, Green, Blue EBU (medium short persistence) Aperture grille pitch 0.24mm Phosphor pitch 0.25mm Face Plate G-WARAS Focusing method Dynamic Beam Forming (DBF) Video 0.7Vp-p analog RGB INPUT SIGNAL Sync Separate H, V sync., Composite sync., or Sync on Green Input Connectors DB9-15P X 2 SIGNAL INTERFACE Input Impedance 75Ω (video), 2.2kΩ (sync.) Function •
Résumé du contenu de la page N° 18
ENGLISH AD-A205 MITSUBISHI ON ON 1 2 3 4 5 6 7 APPENDIX 7 7.2 SC-B110 Signal Cable 7.1 Monitor Signal Input Connector (DB9-15P) (Female) Approx. 1.8m DB9-15P MOUNTED ON THE REAR PANEL DB9-15P(Male) DB9-15P(Male) PIN ASSIGNMENTS PIN ASSIGNMENTS Pin No. Signal 1 RED VIDEO Pin No. Signal 2 GREEN VIDEO 1 RED 3 BLUE VIDEO 2 GREEN 4 GROUND 3 BLUE 5 DDC GROUND 4 GROUND 6 RED GROUND 5 DDC GROUND 7 GREEN GROUND 6 RED GROUND 8 BLUE GROUND 7 GREEN GROUND 9NC 8 BLU
Résumé du contenu de la page N° 19
(3) “AD-A205 Mac Adapter Setting Chart” shows all available modes for Macintosh systems and all possible combinations with the monitor. We recommend that you use the monitor with a preset timing. (See Section 1.2 Internal Preset Memory Capability) (4) Please refer to the instruction book of your computer about the resolution setting. Resolution may not be changed on some computers. -1-16 - Optional Macintosh AD-A205 Adapter Setting Chart Set the dip switch "ON" as shown below. Example; "1,2
Résumé du contenu de la page N° 20
DEUTSCH INHALTSVERZEICHNIS 1. EINLEITUNG ....................................................... 2-2 ACHTUNG 1.1 Eigenschaften .......................................... 2-2 Das mitgelieferte Netzkabel wurde konzipiert, um 1.2 Interne Speicherfähigkeit ......................... 2-3 größtmögliche Sicherheit zu gewährleisten. Es darf nur an eine ordnungsgemäß geerdete Steckdose 1.3 Power Management Funktion .................. 2-3 angeschlossen werden, um eventuelle Stromschläge 1.4 DDC ...........
