Instruction d'utilisation Lindy 21542(FR)

Résumé du contenu de la page N° 1

LINDY 15” & 17” LCD Terminals


User Manual English






























LINDY 17” LCD Terminal No’s:
21540(DE), 21541(IT), 21542(FR), 21543(UK), 21544(CH), 21545(US)

LINDY 15” LCD Terminal No’s:
21524(UK), 21526(DE), 21527(IT), 21528(FR), 21529(US), 21519(CH)



Tested to Comply with

FCC Standards
For Commercial Use
www.LINDY.com
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - SECOND EDITION (APRIL 20

Résumé du contenu de la page N° 2

User manual 15” & 17” LCD Terminals Supplied Items The LCD Terminal package consists of: • 1 x 1U, 19” rack mount console with 17” or 15” LCD screen (according to part number) and 2 locking keys • 1 x 19” mounting kit with screws and multiple rear mounting brackets for mounting to a depth of between 53cm and 100cm • 1 x 1.8m, 3-in-1 KVM system cable (2 x PS/2 mouse & keyboard, HD15 VGA at each end) • 1 x Power cable • 1 x User manual CD • 1x Short Manual (printed) Please ch

Résumé du contenu de la page N° 3

User manual 15” & 17” LCD Terminals Features • The LINDY LCD Terminal is designed for use in standard 60cm to 120cm depth, 19” cabinets. It requires a mounting depth of at least 50cm and a distance between front and rear 19” rails of at least 43cm. • The complete drawer can be fully slid in and out of the rack. • It also offers the option to pull out the LCD tray only and flip it up so that the screen can be viewed while the keyboard is hidden, and the cabinet doors are closed and

Résumé du contenu de la page N° 4

User manual 15” & 17” LCD Terminals Depending on the distance between the front and rear 19” mounting rails, the following brackets should be used: Between 43cm and 58cm, use rear single slider brackets. Between 52cm and 86cm: use short rear L-brackets plus support brackets Between 68cm and 83.5cm, use long rear L-brackets plus support brackets Note: if you require extended rear L- rackets for longer distances between the front and rear 19” rails (not c

Résumé du contenu de la page N° 5

User manual 15” & 17” LCD Terminals Installing the long rear brackets Please select the appropriate brackets according to the distance between your 19” rails (see Important note on page 3) and install them as per the pictures. C B A You will need the front support brackets (A), outer slider brackets (B), inner slider bracket (C)..... ....and either the short or long L- bracket (DS and DL). DL DS First, position the front support bracket (A) with the outer and inner sli

Résumé du contenu de la page N° 6

User manual 15” & 17” LCD Terminals Mounting the drawer into the cabinet Fix the front 19” brackets of the drawer onto the front side of your 19” cabinet. Fix the screws only to the slider bracket - not to both brackets! To slide the complete drawer out of the 19” rack, unscrew the two thumbscrews on the front of the 19” bracket. This allows the LCD panel to be flipped up. LCD ON/OFF SWITCH Fix the screws on the back of the drawer onto the rear side of your 19” Ca

Résumé du contenu de la page N° 7

User manual 15” & 17” LCD Terminals Cable connections 1. Ensure the computer or KVM switch you are connecting to is switched OFF! 2. Use the included ‘3-in-1 2 x PS/2 + 1 x VGA’ cable to connect to the console ports of your computer or KVM switch 3. Connect the power cable to the mains and to the back of the KVM LCD Terminal 4. Switch ON the power to the KVM LCD Terminal 5. Switch ON the power to the connected PC or KVM switch LCD DISPLAY For adjustment and configurati

Résumé du contenu de la page N° 8

Radio Frequency Energy Certifications Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances. Canadian Department of Communications RFI FCC Compliance Statement (United States) statement This equipment generates, uses and can radiate This equipment does not exceed the class B limits radio frequency energy and if not installed and used