Résumé du contenu de la page N° 1
U65C‘tf uvq/cbdl vq/gn Q bhf 3 Xf eoftebz- Kvmz 23 - 3111 5 ;1: QN
Setup
Hardware Requirements
This monitor requires a computer with a suitable on-board sub-system or
Video Adapter card that can support XGA 1024 × 768, SVGA 800 x 600, or
VGA 640 x 480 at 60 Hz.
Handling Instructions
Do not support the monitor 1. Lift the monitor by placing your hands where indicated below.
within the screen area. The
Liquid Crystal Display is
glass and can be damaged
by rough handling or
excessive pressure
Résumé du contenu de la page N° 2
U65C‘tf uvq/cbdl vq/gn Q bhf 4 fX eoftebz- Kvmz 23 - 3111 5 ;1: QN Adjusting the Monitor Position Viewing Angle You can tilt the screen backward and forward as shown below. Working Practices This section gives Rest advice on how you can Take regular breaks. Vary your posture, stand up and stretch occasionally as work comfortably and reduce fatigue. prolonged use of computer workstations can be tiring. Back You should sit back in your chair and use the backrest. Hands Adjust the seat height so
Résumé du contenu de la page N° 3
U65C‘tf uvq/cbdl vq/gn Q bhf 5 Xf eoftebz- Kvmz 23 - 3111 5 ;1: QN Eyesight Working with monitors, in common with any prolonged close work, can be visually demanding. Look away from the screen periodically and have your eyesight checked regularly. Screen settings Set the screen brightness and contrast to a comfortable level. You may have to adjust this as the lighting changes during the day. Many application programs let you select color combinations which can help you to view in comfort. S
Résumé du contenu de la page N° 4
U65C‘tf uvq/cbdl vq/gn Q bhf 6 fX eoftebz- Kvmz 23 - 3111 5 ;1: QN Connecting your Monitor Analog cable: Be sure to read the ‘Safety 1. Turn off your PC and all attached devices. Information’ at the front of 2. Connect the signal cable to the video port on the back of your computer. this User Guide before carrying out this procedure. This port might be directly attached to your computer (figure A), or it might be part of a video adapter card (figure B). The video port on your computer or vi
Résumé du contenu de la page N° 5
U65C‘tf uvq/cbdl vq/gn Q bhf 7 Xf eoftebz- Kvmz 23 - 3111 5 ;1: QN Configuring your Monitor Setup Diskette for Windows95 or Windows 98 This section must be To use the Plug and Play feature in Windows 95 or Windows 98, files should completed before be loaded from the IBM Flat Panel Monitor Installation diskette: continuing with the Windows 95 or Windows 98 1. Turn off the computer and all attached devices. Auto Setup on Page 11. 2. Ensure that the monitor is connected correctly. 3. Turn on th
Résumé du contenu de la page N° 6
U65C‘tf uvq/cbdl vq/gn Q bhf 8 fX eoftebz- Kvmz 23 - 3111 5 ;1: QN The AC adapter and signal cable are connected to your monitor. If you wish to change these or to fit a different stand, see Further Help on page 25. Switching on your Monitor 1. Switch on the power source and your computer. 2. Switch on your monitor by pushing and releasing the power switch marked . To switch off your monitor, push and release the power switch again. 3. Turn on the monitor and then the computer. 4. Run AU
Résumé du contenu de la page N° 7
U65C‘tf uvq/cbdl vq/gn Q bhf 9 Xf eoftebz- Kvmz 23 - 3111 5 ;1: QN 14. Choose IBM T54A monitor and select OK. The files will be copied from the diskette to your hard drive. 15. Close all open windows and remove the diskette. 16. Reboot the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles. 8
Résumé du contenu de la page N° 8
U65C‘tf uvq/cbdl vq/gn Q bhf : fX eoftebz- Kvmz 23 - 3111 5 ;1: QN Auto Setup Auto Setup Before carrying out this When you first use your monitor you must perform Auto Setup. This section, it is very procedure sets up your monitor to process the video signals from your important that The Setup computer without image discoloration or smearing. After you perform Auto Diskette for Windows 95 or Setup, the settings are stored and used each time you turn on the monitor. Windows 98/Windows 2000/
Résumé du contenu de la page N° 9
U65C‘tf uvq/cbdl vq/gn Q bhf 21 X feoftebz - Kvmz 2 3- 3111 5;1: QN Auto Setup for DOS You must use DOS when you run DOS Auto Setup. If the monitor is in standby 1. Turn on the monitor first; then the PC. mode (STANDBY ON), it may automatically turn off while If the message CHECK SIGNAL CABLE is displayed, or if nothing is you are waiting for it to warm up. displayed check: If this happens, switch off the • that the video interface cable is connected properly. monitor and switch it on agai
Résumé du contenu de la page N° 10
U65C‘tf uvq/cbdl vq/gn Q bhf 22 X feoftebz - Kvmz 2 -3 3111 5;1: QN Auto Setup for Windows 3.1, Windows 95, Windows 98, Windows NT or Windows 2000 If the monitor is in standby 1. Turn on the monitor first; then the PC. mode (STANDBY ON), it may automatically turn off while If the message CHECK SIGNAL CABLE is displayed, or if nothing is you are waiting for it to warm up. displayed check: • that the video interface cable is connected properly. • the correct video adapter card is installed. •
Résumé du contenu de la page N° 11
U65C‘tf uvq/cbdl vq/gn Q bhf 23 X feoftebz - Kvmz 2 3- 3111 5;1: QN 9. When finished, the OSD main menu returns. Press the Exit button once to exit from the OSD. 10. Press the ESC key to return to Windows. You have completed the monitor setup for Windows. If you use other operat- ing systems, perform the appropriate AUTO SETUP for those systems, also: see Auto Setup for DOS on page 10. 12
Résumé du contenu de la page N° 12
U65C‘tf uvq/cbdl vq/gn Q bhf 24 X feoftebz - Kvmz 2 -3 3111 5;1: QN Manual Setup Normally, you can complete the setup procedure using AUTO SETUP, however, if your screen image is still distorted after you perform AUTO SETUP or the setup diskette does not run on your system, perform MANUAL SETUP. If the monitor is in standby 1. Have your monitor turned on for about 15 minutes, until the monitor mode (STANDBY ON), it warms up. might automatically turn off while you are waiting for it to 2.
Résumé du contenu de la page N° 13
U65C‘tf uvq/cbdl vq/gn Q bhf 25 X feoftebz - Kvmz 2 3- 3111 5;1: QN Adjusting Your LCD Monitor User controls User control features Icon Control Description Displays the OSD main menu Exit Exits from menus and sub-menus Exits the OSD Displays the OSD main menu Left Arrow Moves the cursor to highlight icons and other options Displays the OSD main menu Right Arrow Moves the cursor to highlight icons and other options Displays the OSD main menu OSD Enter Enters menus and sub-menus and selects th
Résumé du contenu de la page N° 14
U65C‘tf uvq/cbdl vq/gn Q bhf 26 X feoftebz - Kvmz 2 -3 3111 5;1: QN The settings are saved • Press the Exit button to move backwards through the sub-menus and exit after adjustment and when from the OSD. exiting the OSD and will be effective thereafter. Note: After making adjustments, the Power indicator LED will briefly turn amber to indicate that the new value has been saved. OSD Lock / Unlock This feature allows you to secure the current control settings, while allowing the user to adju
Résumé du contenu de la page N° 15
U65C‘tf uvq/cbdl vq/gn Q bhf 27 X feoftebz - Kvmz 2 3- 3111 5;1: QN On-screen display (OSD) controls The settings adjustable with the user controls are viewed through the On- Screen Display (OSD). Press any of the OSD buttons to activate the OSD. Analog part: The LCD monitor needs Initial appearance of OSD time to become thermally stable the first time you turn it on each day. Thus, to achieve more accurate adjustments for parameters, allow the LCD monitor to warm up (be On) for at least
Résumé du contenu de la page N° 16
U65C‘tf uvq/cbdl vq/gn Q bhf 28 X feoftebz - Kvmz 2 -3 3111 5;1: QN Controls and OSD Icon Description Sub-menu(s) Adjustments Use the Arrow buttons to Manual - adjust away the interference. If •Fine IMAGE LOCK satisfactory results are • Coarse (continued) not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. This function may change the width of the display image. Use the H-Position function on the Image Position menu to center the display ima
Résumé du contenu de la page N° 17
U65C‘tf uvq/cbdl vq/gn Q bhf 29 X feoftebz - Kvmz 2 -3 3111 5;1: QN Controls and OSD Icon Description Sub-menu(s) Adjustments Resets the Brightness, Contrast,Color, Color & NO - Does not make the Image position, fine and coarse setting. Geometry adjustment RESET YES - Resets the colorand geometry. Shows information about the addressability and the horizontal and vertical frequencies of the images received from the computer or video INFORMATION board. The language chosen affects only the
Résumé du contenu de la page N° 18
U65C‘tf uvq/cbdl vq/gn Q bhf 2: X feoftebz - Kvmz 2 -3 3111 5;1: QN The LCD monitor needs Digital part: time to become thermally stable the first time you turn it on each day. Thus, to achieve more Initial appearance of OSD accurate adjustments for parameters, allow the LCD monitor to warm up (be On) for at least 15 minutes before making any screen adjustments. OSD functions Controls and OSD Icon Description Sub-menu(s) Adjustments Adjusts brightness BRIGHTNESS The image lock function
Résumé du contenu de la page N° 19
U65C‘tf uvq/cbdl vq/gn Q bhf 31 X feoftebz - Kvmz 2 -3 3111 5;1: QN Controls and OSD Icon Description Sub-menu(s) Adjustments Resets the Brightness and image Yes/No NO - Does not make the position setting. adjustment RESET YES - Reset Shows information about the addressability and the horizontal and vertical frequencies of the images received from the computer or video INFORMATION board. The language chosen affects only the Select one of the five language of the OSD. It has no effect
Résumé du contenu de la page N° 20
U65C‘tf uvq/cbdl vq/gn Q bhf 32 X feoftebz - Kvmz 2 -3 3111 5;1: QN Further Information Display modes The display mode the monitor uses is controlled by the computer. Therefore, you should refer to your computer documentation for details on how to change display modes. The image size, position and shape may change when the display mode changes. This is normal and the image can be readjusted using AUTO SETUP and the monitor controls. Unlike CRT monitors, which require a high refresh rate to m
