Instruction d'utilisation JVC TM-2100PN-K

Résumé du contenu de la page N° 1

COLOUR VIDEO MONITOR
INSTRUCTIONS
TM-2100PN-K
BA
–+ Y/ C VIDEO VIDEO
ON
OFF
PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT INPUT SELECT POWER
TM-2100PN-K
LCT0054-002A-H
LCT0054-002A-H 1 02.07.25, 3:44 PM

Résumé du contenu de la page N° 2

Thank you for purchasing this JVC colour video monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor’s capabilities. SAFETY PRECAUTIONS In order to prevent any fatal accidents caused by misoperation or mishandling the monitor, be fully aware of all the following precautions. Machine Noise Information Ordinance 3. GSGV, January WARNINGS 18, 1991: The sound pressure level at the operator To prevent fire or shock hazard, do not expose this positi

Résumé du contenu de la page N° 3

POWER CONNECTION WARNING Do not cut off the main plug from this equipment. The wire which is coloured green-and-yellow must be connected If the plug fitted is not suitable for the power points in your to the terminal which is marked with the letter E or the safety home or the cable is too short to reach a power point, then earth symbol ˙ or coloured green or green-and-yellow. obtain an appropriate safety approved extension lead or adapter or consult your dealer. The wire which is coloured blue

Résumé du contenu de la page N° 4

CONTROLS AND FEATURES FRONT VIEW 1 3 5 7 9 11 2 4 6 8 10 15 BA –+ Y/ C VIDEO VIDEO ON OFF INPUT SELECT PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT POWER TM-2100PN-K – + Y/ CBA VIDEO VIDEO ON OFF INPUT SELECT TM-2100PN-K PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT POWER 12 13 14 9 Input A (VIDEO) button [INPUT SELECT A 1 Phase button [PHASE ] Press this button to set the picture hue adjustment mode. VIDEO ] Adjust the value with the VOLUME/SELECT buttons. Also Selects the v

Résumé du contenu de la page N° 5

REAR VIEW IN OUT A 16 IN OUT 17 VIDEO B IN A IN OUT IN OUT Y/ C 18 VIDEO B IN Y/ C OUT OUT A IN OUT AUDIO B IN OUT REMOTE IN OUT IN OUT A 19 To AC outlet AUDIO (230 V AC, 50 Hz/60 Hz) IN OUT B 20 22 IN OUT REMOTE 21 23 16 Video A terminals [VIDEO A IN/OUT] Notes: Video signal input (IN) and output (OUT) terminals. * For corresponding video signals, use the VIDEO A The output terminal is bridge-connected. terminal ^. IN : Video signal input terminal * Also refer to the BASIC CONNECTI

Résumé du contenu de la page N° 6

HOW TO HANDLE BASIC OPERATIONS BASIC OPERATION Colour system indication (PAL or NTSC) 1. Press the POWER switch to turn on the power. PAL _ON : Power turns ON. (Power indicator: lit) ON —OFF : Power turns OFF. (Power indicator: unlit) OFF POWER 2. Press the INPUT SELECT button to choose input. Selects video/audio signals input to terminals on the rear panel. B A Y/ C VIDEO VIDEO INPUT Terminals on the rear panel With regard to Colour system indication SELECT INPUT SELECT ● With the COLOR SYSTEM

Résumé du contenu de la page N° 7

HOW TO USE THE MENU FUNCTIONS DISPLAY AND SELECTION IN THE

SCREEN MODE (SETTING) screen You can set the following menu items. Set them depending on your needs. 1 ‰ SHARPNESS : 00 • SHARPNESS • ASPECT RATIO COLOR TEMP. : 6500 • COLOR TEMP. • BRIGHTNESS P.S. COLOR SYSTEM : AUTO • COLOR SYSTEM ASPECT RATIO : 4–3 BRIGHTNESS P.S. : OFF 1. Press the MENU button. 3 2 The screen is displayed. EXIT 4 MENU 2. Press the PHASE ( ) or CHROMA ( ) button t

Résumé du contenu de la page N° 8

HOW TO USE THE MENU FUNCTIONS (cont’d) DISPLAY AND SELECTIONS IN THE MODE (SETTING) screen You can set the following set-up menu items. ● H. POSITION ● WHITE BALANCE ● B.P.S. LEVEL 1 ● V. POSITION ● CONTROL LOCK ● REMOTE SELECT ‰ H. POSITION : 00 V. POSITION : 00 Notes: WHITE BALANCE CONTROL LOCK : OFF ● Parameters for H. POSITION and V. POSITION can be set separately depending on B. P. S. LEVEL : 10 the video input (Input A (VIDEO), In

Résumé du contenu de la page N° 9

Set-up menu items Purpose Settings H. POSITION Adjusts the horizontal position of the screen (+ : Horizontal position –09 –08 • • • • • • –01 00 +01 • • • • • • +08 +09 shifts to the right/–: Horizontal position shifts to the left) V. POSITION Adjusts the vertical position on the screen (+: Vertical position moves –09 –08 • • • • • • –01 00 +01 • • • • • • +08 +09 down/–: Vertical position moves up) WHITE BALANCE Adjusts the white balance Sel

Résumé du contenu de la page N° 10

HOW TO INITIALISE THE SETTING SCREEN DISPLAY AND SELECTIONS IN THE RESET MODE You can set

and screen items, picture adjustment items and RESET screen the volume level to their factory-set (initial) values. RESET Are you sure ? 1. Press the Power ( ) Switch to turn the power “Yes” then “No” then <+> or <–> OFF (—). ON OFF POWER 2. While pressing both MENU button and PHASE ( ) Initial settings

Résumé du contenu de la page N° 11

BASIC CONNECTION EXAMPLE Notes: * Before connecting your system, make sure that all units are turned off. * The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting. * Each pair of input (IN) and output (OUT) terminals are bridge-connected. * If you’re not connecting any equipment to a bridged output (OUT) terminal, be sure not to con

Résumé du contenu de la page N° 12

BASIC CONNECTION EXAMPLE (cont’d) 7 VIDEO B (VIDEO) Connection Example (Select Input B (VIDEO) button) IN OUT A Video Camera Video Video (Video signal cable) IN OUT (Video signal cable) VIDEO B IN VCR Y/ C OUT Video Monitor IN A OUT AUDIO Audio IN OUT Audio B (Audio signal cable) Video Monitor (Audio signal cable) VCR REMOTE IN OUT External control switch REMOTE open circuit (open) REMOTE (Remote cable) RCA pin (Remote cable) short circuit (short) – + Y/ CBA VIDEO VIDEO _ON INPUT SELECT —OFF TM-

Résumé du contenu de la page N° 13

TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorised dealer or service centre for assistance. Problems Points to be checked Measures (Remedy) No power supply. Is the power plug loosened or disconnected? Firmly insert the power plug. No picture with the Is the video signal output from the connected Set the connected component correctly. power on. componen

Résumé du contenu de la page N° 14

SPECIFICATIONS MODEL TM-2100PN-K Type Colour video monitor Colour system PAL, NTSC (3.58) Picture tube 54 cm measured diagonally, flat-square type, 90° deflection, in-line gun, vertical line trio type (phosphor stripe pitch 0.69 mm) Effective screen size Width 406.4 mm Height 304.8 mm Diagonal 508 mm Scanning frequency H : 15.734 kHz (NTSC), 15.625 kHz (PAL) V : 59.94 Hz (NTSC), 50 Hz (PAL) Horizontal resolution 450 TV lines or more (Y/C input mode) Input terminals VIDEO A Composite vi

Résumé du contenu de la page N° 15

7 Dimensions Unit : mm < Side View > < Front View > 1.3 479 9.5 476 50.2 * 416.4 BA – + Y/ C VIDEO VIDEO ON OFF INPUT SELECT TM-2100PN-K PHASE CHROMA BRIGHT CONTRAST MENU VOLUME/SELECT POWER 3.5 105 135 128.5 382.8 492 * Asterisks ( ) are used to indicate front panel ∗ dimensions. 7 Y/C (Mini DIN 4 pin) terminal specification 2 4 Pin No. Signal IN 1 GND (Y) 1 3 Y/C 2 4 2 GND (C) 3Y OUT 1 3 4C 15 LCT0054-002A-H 15 02.07.25, 3:45 PM * 314.8 407.5

Résumé du contenu de la page N° 16

TM-2100PN-K COLOUR VIDEO MONITOR VICTOR COMPANY OF JAPAN, LIMITED Printed in Thailand 0702-Y-U-JMT 2002 VICTOR COMPANY OF JAPAN, LIMITED © LCT0054-002A-H 16 02.07.25, 3:45 PM