Instruction d'utilisation JVC TM-A210G

Résumé du contenu de la page N° 1

COLOR VIDEO MONITOR
BEDIENUNGSANLEITUNG : FARB-VIDEO-MONITOR
MANUEL D’INSTRUCTIONS : MONITEUR VIDEO COULEUR
MANUALE DI ISTRUZIONI : MONITOR VIDEO A COLORI
INSTRUCCIONES : MONITOR DE VIDEO A COLOR
INSTRUCTIONS
TM-A210G
For Customer Use:
Enter below the Serial No. which is located on the rear of the cabinet.
Retain this information for future reference.
Pour l’usage du client:
Enter ci-dessous le numéro de série qui est situé sur l’arrière du coffret.
Conserver cette information pour une référence

Résumé du contenu de la page N° 2

INSTRUCTIONS COLOR VIDEO MONITOR TM-A210G Thank you for purchasing this JVC color video monitor. Before using it, read and follow all instructions carefully to take full advantage of the monitor’s capabilities. EN_TM_A210GE.p65 1 03.3.12, 7:11 PM ENGLISH

Résumé du contenu de la page N° 3

SAFETY PRECAUTIONS In order to prevent any fatal accidents caused by misoperation FCC INFORMATION (U.S.A. only) or mishandling the monitor, be fully aware of all the following precautions. CAUTION: Changes or modification not approved by JVC could void the user's authority to operate the equipment. WARNINGS To prevent fire or shock hazard, do not expose this NOTE: This equipment has been tested and found to monitor to rain or moisture. Dangerous high voltages comply with the limits for a Class B

Résumé du contenu de la page N° 4

POWER CONNECTION The power supply voltage rating of this product is 120 V AC (For U.S.A. and Canada only) and 220 – 240 V AC (For European countries or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure Safety and EMC regulations of each countries. Power cord Power supply voltage : 120 V AC 220 – 240 V AC 220 – 240 V AC Countries : U.S.A. and Canada European countries United Kingdom Warning: ÷ Do not

Résumé du contenu de la page N° 5

CONTROLS AND FEATURES FRONT VIEW 1 Chroma/Phase button 5 Input A (VIDEO) button and lamp [INPUT [ CHROMA/ PHASE] SELECT A] Press this button to activate the picture color density Selects the video and audio signals input to the VIDEO A adjustment mode or picture hue adjustment mode. Each e and AUDIO A p terminals on the rear panel. The time you press the button, the adjustment item changes. lamp lights when selected. Picture color density Ô Picture hue 6 Input B (VIDEO / Y/C)

Résumé du contenu de la page N° 6

REAR VIEW p Audio A terminals [AUDIO A IN/OUT] e Video A terminals [VIDEO A IN/OUT] Input (IN) and output (OUT) terminals for the audio signal Video signal input (IN) and output (OUT) terminals. corresponding to the VIDEO A terminals e. The output terminal is bridge-connected. The output terminal is bridge-connected. IN : Video signal input terminal IN : Audio signal input terminal OUT : Bridge-connected video signal output terminal OUT : Bridge-connected audio signal output termina

Résumé du contenu de la page N° 7

CONTROLS AND FEATURES (cont’d) REAR VIEW To AC outlet (120 V AC, 50 Hz/60 Hz) For U.S.A. and Canada To AC outlet (220 – 240 V AC, 50 Hz/60 Hz) For Europe For the United Kingdom y AC inlet [AC IN] Power input connector. Connect the provided AC power cord u to an AC outlet (120 V AC or 220 – 240 V AC, 50 Hz/60 Hz). u Power cord Connects the provided power cord (120 V AC or 220 – 240 V AC, 50 Hz/60 Hz) to the AC IN connector y. Caution: In North America (USA and Canada), this monitor c

Résumé du contenu de la page N° 8

HOW TO HANDLE BASIC OPERATIONS BASIC OPERATION STATUS indication (PAL or NTSC) 1. Press the POWER switch to turn on the power. PAL _ ON : Power turns ON. (Power indicator: lit) — OFF : Power turns OFF. (Power indicator: unlit) 2. Press the INPUT SELECT buttons to choose input. Select video/audio signals input to terminals on the rear panel. The lamp for the selected button lights up. About the STATUS indication INPUT Terminals on the rear panel ÷ With the COLOR SYSTEM setting set SELECT Video si

Résumé du contenu de la page N° 9

HOW TO USE THE MENU FUNCTIONS DISPLAY AND SELECTION IN THE

SCREEN MODE (SETTING) screen You can set the following menu items. Set them depending on your needs. • SHARPNESS • ASPECT RATIO • COLOR SYSTEM • COLOR TEMP. 1. Press the MENU button. MENU The screen is displayed. 2. Press the CHROMA/PHASE or CONTRAST/BRIGHT button to select MENU items. CHROMA CONTRAST A selection mark (3) is put next to the selected item. 1 Selection mark (3): Indicates the Fron

Résumé du contenu de la page N° 10

DISPLAY AND SELECTIONS IN THE MODE (SETTING) screen You can set the following set-up menu items. • H. POSITION • CONTROL LOCK • INPUT REMOTE • WHITE BALANCE • STATUS DISPLAY • ASPECT REMOTE Notes: ÷ Parameter for H. POSITION can be set separately depending on the video input (Input A (VIDEO) or Input B (VIDEO)) selected by the input select buttons on the front panel. Select the required video input with the input select buttons on the front panel in advance. ÷ WHITE B

Résumé du contenu de la page N° 11

HOW TO USE THE MENU FUNCTIONS (cont’d) Set-up menu items Purpose Settings H. POSITION Adjusts the horizontal position of the screen (+ : Horizontal position –05 –04 –01 00 +01 +04 +05 shifts to the right/–: Horizontal position shifts to the left) WHITE BALANCE Adjusts the white balance Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment. Screen setting is changed to the selected setting mode. DRIVE R.DRIVE Adjusts red level –09 –08 –01 00 +01 +08 +09 B.DRIVE Adjusts blue level –09 –08 –01 00 +01 +0

Résumé du contenu de la page N° 12

HOW TO INITIALIZE THE SETTING SCREEN DISPLAY AND SELECTIONS IN THE RESET MODE You can set

and screen items, picture adjustment items and RESET screen the volume level to their factory-set (initial) values. RESET Are you sure ? 1. Press the Power ( ) switch to turn the power “Yes” then <+> “No” then OFF (—). 2. While pressing both MENU button and CHROMA/ Initial settings PHASE button, press the Power ( )

Résumé du contenu de la page N° 13

BASIC CONNECTION EXAMPLE Notes: • Before connecting your system, make sure that all units are turned off. • The illustration below shows some examples of different connections. Terminal connections may differ depending on the component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting. • Each pair of input (IN) and output (OUT) terminals are bridge-connected. • If you’re not connecting any equipment to a bridged output (OUT) terminal, be sure not to con

Résumé du contenu de la page N° 14

7 VIDEO B (Y/C) Connection Example (Select Input B (Y/C)) Audio Audio (Audio signal cable) (Audio signal cable) Video Camera VCR Y/C (S-video) (Y/C (S-video) signal cable) Video Monitor Video Monitor Y/C (S-video) VCR (Y/C (S-video) signal cable) : Signal Flow 13 EN_TM_A210GE.p65 13 03.3.12, 7:11 PM ENGLISH

Résumé du contenu de la page N° 15

TROUBLESHOOTING Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorized dealer or service center for assistance. Problems Points to be checked Measures (Remedy) No power supply. Is the power plug loosened or disconnected? Firmly insert the power plug. No picture with the Is the video signal output from the connected Set the connected component correctly. power on. componen

Résumé du contenu de la page N° 16

SPECIFICATIONS MODEL TM-A210G Type Color video monitor Colour system PAL, NTSC (3.58) Picture tube 54 cm measured diagonally, flat-square type, 90° deflection, in-line gun, vertical line trio type (phosphor stripe pitch H/V: 0.63/0.64 mm) Effective screen size Width 406.4 mm (16") Height 304.8 mm (12") Diagonal 508 mm (20") Scanning frequency H: 15.734 kHz (NTSC), 15.625 kHz (PAL) V: 59.94 Hz (NTSC), 50 Hz (PAL) Horizontal resolution 450 TV lines or more Input terminals VIDEO A Composi

Résumé du contenu de la page N° 17

7 Dimensions Unit : mm (inch) < Front View > < Side View > 476 (18-3/4) 479 (18-7/8) 1.5 (1/16) * 416.4 (16-1/2) * CHROMA CONTRAST VOLUME/SELECT MENU AB ON OFF PHASE BRIGHT INPUT SELECT POWER 382.8 (15-1/8) 3.5 (1/4) 105 (4-1/4) 135 (5-3/8) 128.5 (5-1/8) 20 ( 7/8) 492 (19-3/8) * Asterisks ( ) are used to indicate front panel * dimensions. 7 Y/C (Mini DIN 4 pin) terminal specification Pin No. Signal 1 GND (Y) 2 GND (C) 3Y 4C VICTOR COMPANY OF JAPAN, LIMITED EN_TM_A210GE.p65 1