Résumé du contenu de la page N° 1
DT-V9L3D INSTRUCTIONS
MULTI FORMAT LCD MONITOR Table of Contents
Safety Precautions .............................................. 2
IMPORTANT SAFEGUARDS ...........................2
Installation ............................................................ 4
To adjust the stand height ................................ 4
Daily Operations / Connections ......................... 6
Front panel .......................................................6
Rear panel ....................................
Résumé du contenu de la page N° 2
Safety Precautions 2 WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO Under the following conditions, � The AC power supply is controlled by turning on/ RAIN OR MOISTURE. NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE 1. Turn off the power. off the POWER switch on the rear panel. If the PLACED ON THE APPARATUS. 2. Unplug this product from the wall outlet. product is installed in a place where you cannot 3. Refer service to qualified service personne
Résumé du contenu de la page N° 3
WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS EMC Supplement APPARATUS TO RAIN OR MOISTURE. This equipment is in conformity with the provisions and protection requirements of the corresponding European WARNING: THIS APPARATUS MUST BE CONNECTED TO A MAINS SOCKET Directives. This equipment is designed for professional video appliances and can be used in the following environments: OUTLET WITH A PROTECTIVE EARTHING CONNECTION. � Controlled EMC environment (for example purpose buil
Résumé du contenu de la page N° 4
Installation 4 CAUTION Higher position � Do not rest your arm on the monitor or lean against the monitor. � Do not touch the LCD panel when installing the monitor. � Be sure to install the monitor securely to prevent the monitor from falling over, which may cause damage to the monitor or injury. When shipped from factory, the stand is attached to the monitor. You can tilt the monitor from about 20° upward to about 10° downward. Monitor Stand � When the monitor is not tilted (0°), the guideline
Résumé du contenu de la page N° 5
Lower position To prevent an accidental fall Fix the monitor to a wall by using strings. Attachment screws Fixing the monitor Attach the hook (not provided) to the VESA mounting holes on the rear panel (use the two 100 mm pitch holes on the upper side) using M4 x 10 mm screws (not provided). Bind the hooks on the rear panel of the monitor to a wall or a pillar using durable string. Stand Monitor Hook (not provided) Hook and screws (M4 x 10 mm) (not provided) ENGLISH 5 DT-V9L3D_EN.indd 5 DT-
Résumé du contenu de la page N° 6
Daily Operations / Connections 6 7 Front panel � “NO EFFECT” is displayed when you press a button which is not available for the current input or signal format (the lamp Tally lamp lights even when the function does not actually work). This lamp is controlled by the tally function of the MAKE/TRIGGER terminal. � The items controlled by the MAKE system cannot be controlled by the buttons on the front panel (“REMOTE ON” is displayed � This lamp can also be used as the format indicator (☞ “FORMA
Résumé du contenu de la page N° 7
Menu Operations Audio Channel Selection On the Information Display On the Status Display Select audio channels emitted from the speaker The monitor displays the information below If you press the input button of the current input, 1 Display the menu. and the AUDIO (MONITOR OUT) OUT1/OUT2 depending on the settings of the menu. the status of the input signal and setting of muting To display the MAIN MENU terminals, when EMBEDDED AUDIO signals are displayed for about 3 seconds. \ Press MENU butto
Résumé du contenu de la page N° 8
Daily Operations / Connections (cont.) 88 5 VIDEO/COMPONENT terminals (BNC) p REMOTE terminals 7 Rear panel IN: Input terminals for the composite (VBS) and the Terminals for controlling the monitor by an external analog component (Y/PB/PR) signals. control. (☞ “External Control” on page 16) � Select the signal type in “VIDEO/COMPO. SEL.” q Carry handle corresponding to the type of the input signal (☞ Use this handle when carrying the monitor. page 10). w Security slot OUT: Output terminal for
Résumé du contenu de la page N° 9
7 Available signals Attaching the Power Cord Holder The following signals are available for this monitor. The provided power cord holder prevents accidental disconnection of the AC power cord from the AC IN Video signals terminal. � The power cord holder consists of two parts, a case and a cover. Input terminal Signal format shown VIDEO/COMPONENT No. Signal name in the status display E. AUDIO HD/ 1 3 VBS Y/PB/PR AC IN terminal 1 (☞ page 7) SD SDI* Case (Composite) (Analog component) 2 1 NTSC*
Résumé du contenu de la page N° 10
Menu Configuration—MAIN MENU 10 For the operation procedure, see page 7. PICTURE IMPROVEMENT Setting for the picture quality Item To do Setting value APERTURE* Select the frequency of the luminance signal compensated in OFF, LOW, HIGH “APERTURE LEVEL.” APERTURE Compensate the frequency response of the luminance signal of the 01 – 10 LEVEL* video signal. sub menu Display the sub menu which enables you to adjust the items of “PICTURE IMPROVEMENT” while viewing the actual picture. reset Restore th
Résumé du contenu de la page N° 11
1 MARKER* Settings for marker functions 1/2 Item To do Setting value 2 AREA MARKER* Activate/deactivate the area marker and select the ☞ “NOTE” style of it. 2 MARKER ASPECT* Select the aspect ratio of the area marker. 4:3, 14:9, 13:9, 2.35:1, 1.85:1, 1.66:1 SAFETY MARKER Activate/deactivate the safety marker and select the ☞ “NOTE” style of it. SAFETY AREA Adjust the area of the safety marker. 80% – 100% 3 FRAME* Displays/hides the frame indicating the area of the OFF, ON Operation guide spec
Résumé du contenu de la page N° 12
Menu Configuration—MAIN MENU (cont.) 12 AUDIO SETTING Settings for the level meter Item To do Setting value BAR POSITION Select the type of the level meter display VERT. (vertically), HORZ. (horizontally) — vertically or horizontally. LEVEL METER ch Select the number of the audio channels OFF, 12CH, 8CH displayed on the level meter. CH ARRANGE Select the order of the audio channels LINE, DIVIDE (☞ “NOTE”) displayed on the level meter. BAR TYPE Select the color of the level meter display. 3COL
Résumé du contenu de la page N° 13
WAVE FORM SETTING Settings for the wave form monitor Item To do Setting value POSITION Select the position of the wave form monitor. 1 (lower right), 2 (lower left), 3 (upper left), 4 (upper right) GAIN Adjust the gain level for the incoming wave form –10 – +10 data. OVER LEVEL Select the over level for the incoming luminance ☞ “NOTE” signals. MARKING Activates/deactivates the function to change the OFF, ON color of a wave form when the signal exceeds the limit specified on “LEVEL” (☞ below).
Résumé du contenu de la page N° 14
Menu Configuration—SET-UP MENU 14 FUNCTION SETTING For the operation procedure, see page 7. Settings for the sub menu display, color system, color of the tally lamp, and the format indicator. Item To do Setting value sub menu POSI. Select the contents and displaying position of “sub menu.” ☞ “NOTE” COLOR Select the color system. AUTO, NTSC, PAL SYSTEM � If the picture is unstable with “AUTO,” select “NTSC” or “PAL.” TALLY SELECT Select the color of the tally lamp. GREEN, RED FORMAT Select whethe
Résumé du contenu de la page N° 15
REMOTE SETTING (☞ “External Control” on pages 16, 17) Settings for the external control Item To do Setting value TYPE SEL. Select the external control method for the MAKE/ MAKE, TRIGGER, SET TRIGGER terminal. PIN1, PIN2, PIN3, Assign the control functions to the pins of the MAKE/ TALLY SEL, SDI 1, SDI 2, VIDEO/ PIN4, PIN5 TRIGGER terminal. COMPO., MARKER, FRAME, � Assign a function to each pin terminal by selecting C.MARKER, MARK.SEL, ASPECT, “SET” in “TYPE SEL.” mentioned above. (The STATUS,
Résumé du contenu de la page N° 16
External Control 16 Functions controlled by the MAKE/TRIGGER system 7 About the external control Display Functions to be controlled Opening Short-circuiting This monitor has two external control terminals. TALLY SEL Selects the color of the tally lamp. Green Red � MAKE/TRIGGER terminal (RJ-45): The following external control systems are available. SDI 1 Changes the input to “SDI 1.” Invalid Valid (1) MAKE (make contact) system: Controls the monitor by short-circuiting the corresponding pin term
Résumé du contenu de la page N° 17
7 Using the RS-232C system No. Commands Functions Data You can control the monitor from a personal computer etc. via the RS-232C terminal. 1 ! 0 0 B C N 1 Cr Starts communication (connection) No data � Consult your dealer for the details of the external control specification. 2 ! 0 0 B C N 0 Cr Terminates communication (termination) No data Displays the MAIN MENU/Quits the menu 3 ! 0 0 BM EN U Cr No data operation Baud Rate: 4800 bps 4 ! 0 0 B
Résumé du contenu de la page N° 18
Troubleshooting 18 Solutions to common problems related to the monitor are described here. If none of the solutions presented here solve the problem, unplug the monitor and consult an authorized dealer or service center. Symptom Probable cause and corrective action Page Symptom Probable cause and corrective action Page � Press the button. 6 � Adjust the picture contrast or brightness by using the adjustment 6, 14 The picture becomes 8 knobs on the front panel. Or, adjust “CONTRAST” or “BRIGHT
Résumé du contenu de la page N° 19
7 Self-check program This monitor has a self-check function, which allows it to detect malfunctions and alert you. This makes troubleshooting easier. Whenever a problem occurs, one or some of the self-check lamps will flash. If this happens, follow the steps below and contact your dealer to resolve the problem. When the screen goes blank and one or some of the self-check lamps on the front control panel start flashing... 1 Check which lamps are flashing. 2 Press button to turn off (on standb
Résumé du contenu de la page N° 20
Maintenance 20 Unplug this product from the wall outlet before cleaning. Screen To avoid irreparable change in appearance of the screen such as uneven color, discoloration, scratches, be careful about the following: � Do not paste or stick anything using any glues or adhesive tapes. � Do not write anything on the screen. � Do not strike the screen with a hard object. � Avoid condensation on the screen. � Do not wipe the screen with solvent such as alcohol, thinner, or benzine. � Do not wipe the
