Résumé du contenu de la page N° 1
USER MANUAL
ENGLISH
DEUTSCH
FRANCAIS
NEDERLANDS
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes to
read carefully through this brief but
comprehensive manual before installing and
switching on the monitor. Please keep this
manual in a safe place for your future reference.
Résumé du contenu de la page N° 2
FCC DECLARATION OF CONFORMITY Model Number: PLT1500 / PLT1700 / PLT1900 The result of electromagnetic emission has been evaluated by Compliance Certification Service Inc. and showed in the test report. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been t
Résumé du contenu de la page N° 3
TABLE OF CONTENTS FOR YOUR SAFETY .............................................................................. 1 SAFETY PRECAUTIONS ................................................................. 1 SPECIAL NOTES ON LCD MONITORS ............................................. 3 CUSTOMER SERVICE ...................................................................... 3 CLEANING ....................................................................................... 3 BEFORE YOU OPERATE THE MONITOR
Résumé du contenu de la page N° 4
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock. DO NOT PUT ANY OBJECT INTO THE MO
Résumé du contenu de la page N° 5
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may
Résumé du contenu de la page N° 6
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitors and do not indicate a problem. When you first turn on the LCD monitor, the picture may not fit in the display area NOTE because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. You may find sl
Résumé du contenu de la page N° 7
BEFORE YOU OPERATE THE MONITOR FEATURES ProLite T1530SR : 38cm (15.0") TFT Color LCD Monitor Resistive Film ProLite T1730SR : 43cm (17.0") TFT Color LCD Monitor Resistive Film ProLite T1930SR : 48cm (19.0") TFT Color LCD Monitor Resistive Film ProLite T1530SR: Supports Resolutions up to 1024 × 768 ProLite T1730SR / ProLite T1930SR : Supports Resolutions up to 1280 × 1024 Digital Character Smoothing Automatic Set-up Plug & Play VESA DDC2B Compliant ® Windows 95/98/20
Résumé du contenu de la page N° 8
CHECKING THE CONTENTS OF THE PACKAGE The following accessories are included in your package. Check to see if they are enclosed with the monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama office. ProLite T 1730SR 1530SR 1930SR Accessories 1 AC Adapter* 1 Power Cable* D-Sub Signal Cable DVI-D Signal Cable RS-232C Cable USB Cable Audio Cable Touch Panel Driver Disk 2 (CD-ROM)* User Manual 1 * 1. TO USERS IN 120V AREA CAUTION The rating of the Pow
Résumé du contenu de la page N° 9
CONTROLS AND CONNECTORS / Menu Button ( / MENU) A / Brightness Button ( / ) B + / Volume Button (+ / ) C – / Input Button (– / INPUT ) D With the OSD menu off, pressing the Input Button will switch the input signal from D- NOTE SUB to DVI. Power Indicator E NOTE Green: Normal operation Orange: Power Management The monitor enters into power management mode which reduces the power consumption to less than 2W when receiving no horizontal and/or vertical sync signal. Speak
Résumé du contenu de la page N° 10
CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. A Connect the computer to the monitor with the Signal Cable. B Connect the computer to the monitor with the RS-232C Cable or the USB Cable. C Connect the monitor to the audio equipment with the Audio Cable when using the audio features. D E Connect the Power Cable to the monitor first and then to the power supply. NOTE The signal cables used for connecting the computer and monitor vary by the type of compute
Résumé du contenu de la page N° 11
COMPUTER SETTING Signal Timing Change to the desired signal timings listed on page 21 in COMPLIANT TIMING. Windows 95/98/2000/Me/XP/Vista Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on Windows 95/98/2000/Me/XP/Vista by connecting the monitor to DDC2B compliant computer with the Signal Cable supplied. Windows 95/98/2000/Me/XP Monitor Information File for iiyama monitors may be necessary for your computer and obtained via the Internet, u
Résumé du contenu de la page N° 12
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 21. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 13 for SCREEN ADJUSTMENTS. Press the Menu Button to start the On Screen Display feature. There are ((((( additional menu pages which can be switched by using the / Buttons. 1280x1024 ANALOG CONTRAST BRIGHTNESS VOLUME AUTO
Résumé du contenu de la page N° 13
50 ADJUSTMENT MENU CONTENTS 1280x1024 H : 60KHz ANALOG V : 75Hz Page : 1 CONTRAST BRIGHTNESS ANALOG Input VOLUME AUTO TUNE H-POSITION V-POSITION LANGUAGE EXIT EXIT SELECT P Page age Adjustment Item Problem / Option Button to Press Too dull CONTRAST Too intense Too dark 1 BRIGHTNESS * Direct Too bright Too soft VOLUME Direct Too loud Adjust Clock, Phase, V-Position and H-Poshition 2 AUTO TUNE * automatically. NOTE The screen becomes dark for approxi
Résumé du contenu de la page N° 14
1280x1024 Page : 2 ANALOG CLOCK ANALOG Input PHASE RED GREEN BLUE COLOR TEMP. RESET EXIT EXIT SELECT Page Page Adjustment Item Problem / Option Button to Press CLOCK To correct flickering text or lines PHASE To correct flickering text or lines Too weak RED Too strong Too weak GREEN Too strong Too weak BLUE Too strong Warm Reddish white COLOR TEMP. Cool Bluish white Normal Normal white RESET Factory-preset data is restored. EXIT Exit OSD adjustments. 1
Résumé du contenu de la page N° 15
1280x1024 Page : 1 DIGITAL CONTRAST DIGITAL Input BRIGHTNESS VOLUME LANGUAGE COLOR TEMP. EXIT EXIT SELECT Page Page Adjustment Item Problem / Option Button to Press Too dull CONTRAST Too intense Too dark BRIGHTNESS * Direct Too bright Too soft VOLUME Direct Too loud English English Italiano Italian LANGUAGE Traditional Chinese Deutsch German Simplified Chinese Français French Español Spanish Japanese RETURN TO MENU Return to Menu. Warm Reddish white COLOR TEMP. Cool Blui
Résumé du contenu de la page N° 16
SCREEN ADJUSTMENTS The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. ProLite T1530SR is designed to provide the best performance at resolution of 1024 × 768, but can not provide the best at resolutions of less than 1024 × 768, because the picture is automatically stretched to fit the full screen or displayed at optimum resolution. It is recommended to operate at resolution of 1024 × 768, in normal
Résumé du contenu de la page N° 17
Press the Auto Button. (Direct adjustment) CCCCC Or perform the Auto Set up. Adjust the image manually by following procedure below when the screen has a flicker DDDDD or blur, or the picture does not fit in the display area after performing the Auto Set up. Stretch the right side of the picture frame to the right edge of the display area by EEEEE adjusting the Clock. Adjust the Phase to correct horizontal wavy noise, flicker or blur in the zebra pattern. FFFFF Select “Position” in the Adjustmen
Résumé du contenu de la page N° 18
Select “Brightness” in the Adjustment Program and adjust the Back Light and HHHHH Contrast so that all 16 levels of gray in the grayscale pattern are visible. Click on “FINISH” to close the Adjustment Program. POWER MANAGEMENT FEATURE The power management feature of this product complies with every power saving requirement of VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to
Résumé du contenu de la page N° 19
TROUBLE SHOOTING If the monitor fails to operate correctly, please follow the steps below for a possible solution. 1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem you have. If the monitor does not get a picture, skip to 2. 2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE MONITOR or if the problem persists. 3. If you are experiencing a problem which is not described below or you cannot correct the problem, di
Résumé du contenu de la page N° 20
APPENDIX SPECIFICATIONS : ProLite T1530SR Model Name ProLite T1530SR-1 ProLite T1530SR-2 Technology Resistive Film Touch Surface processing Anti-glare treatment Screen Light transmission 80% Communication USB serial transfer or RS-232C serial transfer system LCD Driving system a-Si TFT Active Matrix Panel Size Diagonal: 38cm / 15.0" Pixel pitch 0.297mm H × 0.297mm V 2 2 Brightness 280cd/m (With touch panel) 200cd/m (With touch panel) Contrast ratio 500 : 1 (With touch panel) Viewable angle Hori
