Résumé du contenu de la page N° 1
USER MANUAL
ENGLISH
DEUTSCH
FRANCAIS
Thank you very much for choosing the iiyama
LCD monitor.
We recommend that you take a few minutes to
read carefully through this brief but
comprehensive manual before installing and
switching on the monitor. Please keep this
manual in a safe place for your future
reference.
Résumé du contenu de la page N° 2
Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO’03 Display requirements: Ergonomics • Good visual ergonomics and image quality in order to i
Résumé du contenu de la page N° 3
FCC DECLARATION OF CONFORMITY Model Number: PL1700 Trade Name: iiyama Responsible party: IIYAMA North America, Inc. Address: 65 West Street Road, Suite 101B, Warminster, PA 18974 U.S.A. Telephone number: 215-682-9050 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This de
Résumé du contenu de la page N° 4
TABLE OF CONTENTS FOR YOUR SAFETY .............................................................................. 1 SAFETY PRECAUTIONS ................................................................. 1 SPECIAL NOTES ON LCD MONITORS ............................................. 3 CUSTOMER SERVICE ...................................................................... 3 CLEANING ....................................................................................... 3 BEFORE YOU OPERATE THE MONITOR
Résumé du contenu de la page N° 5
FOR YOUR SAFETY SAFETY PRECAUTIONS WARNING STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately. Further use may be dangerous and can cause fire or electric shock. NEVER REMOVE THE CABINET High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of fire or electric shock. DO NOT PUT ANY OBJECT INTO THE MON
Résumé du contenu de la page N° 6
CAUTION INSTALLATION LOCATION Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun shines directly on the monitor. DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monitor may topple and cause injury if not suitably located. Please also ensure that you do not place any heavy objects on the monitor, and that all cables are routed such that children may
Résumé du contenu de la page N° 7
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitors and do not indicate a problem. When you first turn on the LCD monitor, the picture may not fit in the display area NOTE because of the type of computer that is used. In this case, adjust the picture position to the correct position. Due to the nature of the backlight, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. You may find s
Résumé du contenu de la page N° 8
BEFORE YOU OPERATE THE MONITOR FEATURES 43cm (17.0") TFT Color LCD Monitor Supports Resolutions up to 1280 × 1024 2 ProLite E1700S : High Contrast 600:1 / High Brightness 300cd/m / Quick Response Time 5ms 2 ProLite E1700SV : High Contrast 500:1 / High Brightness 300cd/m Digital Character Smoothing Automatic Set-up Stereo Speakers 2 × 1W Stereo Speakers Plug & Play VESA DDC2B Compliant ® Windows 95/98/2000/Me/XP Compliant ® Power Management (ENERGY STAR VESA DPMS
Résumé du contenu de la page N° 9
HOW TO USE THE STAND HOW TO USE THE STAND The monitor is the design that a stand rotate.Be sure to rotate the stand before opearating the monitor, and rotate the stand upward before you re-box the monitor. Install the Stand on a stable surface. The monitor may cause injury or damage if CAUTION it falls or is dropped. Do not give a strong impact to the monitor. It may cause damage. Unplug the monitor before installation to avoid electric shock or damage. 1. Lay the monitor flat on a table with
Résumé du contenu de la page N° 10
CONTROLS AND CONNECTORS FRONT PANEL CONTROL 7 6 5 8 9 10 11 12 1 2 3 4 A Menu Button ( ) 1 B Scroll Down / Brightness Button ( ) C Scroll Up / Contrast Button ( ) D Select / Auto Button ( ) 2 E Power Indicator NOTE Green: Normal operation Orange: Power Management The monitor enters into power management mode which reduces the power consumption to less than 2W when receiving no horizontal and/or vertical sync signal. F Power Switch ( ) G Speakers AC Connector
Résumé du contenu de la page N° 11
CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. A Connect the computer to the monitor with the signal cable.(See page 22 for CONNECTOR PIN B ASSIGNMENT.) Connect the monitor to the audio equipment with the Audio Cable for computer when using the C audio features. Connect the Power Cable to the monitor first and then to the power supply. D NOTE The signal cables used for connecting the computer and monitor may vary with the type of computer used. An incorr
Résumé du contenu de la page N° 12
COMPUTER SETTING Signal Timing Change to the desired signal timing listed on page 21: COMPLIANT TIMING. Windows 95/98/2000/Me/XP Plug & Play The iiyama LCD monitor complies with DDC2B of VESA standard. The Plug & Play function runs on Windows 95/98/2000/Me/XP by connecting the monitor to DDC2B compliant computer with the Signal Cable supplied. For installation on Windows 95/98/2000/Me/XP: The monitor Information File for iiyama monitors may be necessary for your computer and obtained via the I
Résumé du contenu de la page N° 13
OPERATING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 21. You are also able to adjust the picture by following the button operation shown below. For more detailed adjustments, see page 13 for SCREEN ADJUSTMENTS. Press the Menu Button to start the On Screen Display feature. There are ((((( additional Menu items which can be switched by using the / Buttons. Main Menu Analog A
Résumé du contenu de la page N° 14
ADJUSTMENT MENU CONTENTS AUTO Auto Adjust SET Auto Adjust Adjustment Item Problem / Option Button to Press Auto Adjust * Direct Adjust H. / V. Position, H.Size and Fine Tune automatically. Only Analog Input NOTE The screen becomes dark for approximately five seconds during the adjustment. * For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 13 for SCREEN ADJUSTMENTS. Direct You can skip the Menu items and display an adjustment scale d
Résumé du contenu de la page N° 15
Color Adjust Color Adjust Adjustment Item Problem / Option Button to Press Cool Bluish white (9300K) Normal Reddish white (6500K) Warm Greenish white (5400K) R (Red) Too weak 2 User Color G (Green) Too strong B (Blue) Information i Information Information Displays information regarding the current input signal coming H.Frequency: 79.99 kHz from the graphic card in your computer. V.Frequency: 75.03 Hz Pixel Clock: 135.04 MHz NOTE Resolution: 1280 x 1024
Résumé du contenu de la page N° 16
Setup Menu ? Setup Menu Adjustment Item Problem / Option Button to Press English English Suomi Finnish Français French Japanese Language Select Deutsch German Traditional Chinese Español Spanish Simplified Chinese Italiano Italian Disable The massege is turned off. The message of "For best picture quality change resolution to 1280x1024" appears on the screen Resolution Notice Enable every 30 seconds when displaying less than 1280x1024. OSD is too far to the left H. OSD is t
Résumé du contenu de la page N° 17
SCREEN ADJUSTMENTS Adjust the image by following the procedure below to get the desired picture when selecting Analog input. The screen adjustments described in this manual are designed to set image position and minimize flicker or blur for the particular computer in use. The monitor is designed to provide the best performance at resolution of 1280 × 1024, but can not provide the best at resolutions of less than 1280 × 1024 because the picture is automatically stretched to fit the full screen.
Résumé du contenu de la page N° 18
Press the Auto Button. (Auto Adjust) CCCCC Adjust the image manually by following procedure below when the screen has a DDDDD flicker or blur, or the picture does not fit in the display area after performing the Auto Adjust. Adjust the V.Position so that the top and bottom of the picture frame will fit to the EE EEE display area. 1) Adjust the H.Position so that the left side of the picture frame will move to the left FFFFF edge of the display area. 2) Stretch the right side of the picture frame
Résumé du contenu de la page N° 19
Adjust the Fine Tune to correct horizontal wavy noise, flicker or blur in the zebra GGGGG pattern. NOTE In case the strong flicker or blurs remain on a part of the screen, repeat steps and NOTE F because the H.Size may not be adjusted correctly. If the flicker or blurs still remain, G set the refresh rate of computer to low (60Hz) and repeat steps from again. C Adjust the H.Position after the Fine Tune adjustment if the horizontal position moves during the adjustment. Adjust the Brightness
Résumé du contenu de la page N° 20
POWER MANAGEMENT FEATURE The power management feature of this product complies with power saving requirement of ENERGY ® STAR and VESA DPMS. When activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There is a power management step the monitor takes as described below. The power management function, including any timer settings is configured by th
