Résumé du contenu de la page N° 1
HP ZR22w and ZR24w LCD Monitors
User Guide
Résumé du contenu de la page N° 2
© 2009 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services . Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained h
Résumé du contenu de la page N° 3
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supp
Résumé du contenu de la page N° 4
iv About This Guide ENWW
Résumé du contenu de la page N° 5
Table of contents 1 Product Features HP ZR22w and ZR24w Models ............................................................................................................ 1 2 Safety and Maintenance Guidelines Important Safety Information ................................................................................................................ 3 Maintenance Guidelines ....................................................................................................................... 4
Résumé du contenu de la page N° 6
OSD Menu Selections ....................................................................................... 21 Optimizing Digital Conversion ........................................................................... 25 Using the HP Display Assistant Utility ............................................................................... 25 Identifying Monitor Conditions ............................................................................................................ 26 Sleep Timer Mod
Résumé du contenu de la page N° 7
Disposal of Waste Equipment by Users in Private Household in the European Union ................................................................................................................................. 43 HP Recycling Program ...................................................................................................... 43 Chemical Substances ........................................................................................................ 43 Restriction of Hazardous Substan
Résumé du contenu de la page N° 8
viii ENWW
Résumé du contenu de la page N° 9
1 Product Features HP ZR22w and ZR24w Models The LCD (liquid crystal display) monitor has an active matrix, thin-film transistor (TFT). The monitor features include: ZR22w model, 54.61 cm (21.5-inch) diagonal viewable area display with 1920 × 1080 resolution, ● plus full-screen support for lower resolutions ZR24w model, 61 cm (24-inch) diagonal viewable area display with 1920 × 1200 resolution, plus ● full-screen support for lower resolutions ● Wide viewing angle to allow viewing from a sitting
Résumé du contenu de la page N° 10
Pivot Pro software for viewing information on the screen in portrait mode ● HDCP (High-Bandwidth Digital Content Protection) copy protection on DVI and DisplayPort inputs ● ● Software and documentation CD that includes monitor drivers and product documentation ● Energy saver feature to meet requirements for reduced power consumption ● Energy Star qualified (ZR22w model only) ● Intelligent Management AssetControl Compliant with the following regulated specifications: ● European Union CE Directive
Résumé du contenu de la page N° 11
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements on page 41 in Appendix C. WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature. The grounding plug is an important
Résumé du contenu de la page N° 12
Maintenance Guidelines To enhance the performance and extend the life of the monitor: ● Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. Use only a power source and connection appropriate for this monitor, as indicated on the label/ ● back plate of the monitor
Résumé du contenu de la page N° 13
3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. NOTE: Be sure the master power switch, located on the rear panel of the monitor, is in the off position. The master power switch turns off all power to the monitor. Installing the Monitor Pedestal Base NOTE: Do not install the pedestal base if the monitor will be used on a wall, swing arm, or other mounting fixture; i
Résumé du contenu de la page N° 14
Rear Components HP ZR22w and ZR24w Models Figure 3-2 Rear Components Table 3-1 Rear Components Component Function 1 Cable Lock Provision Provides slot for use with cable security locks. 2 Master Power Switch Turns off all power to the monitor. 3 AC Power Connector Connects the AC power cord to the monitor. 4 DisplayPort Connector Connects the DisplayPort cable to the monitor. 5 DVI-D Connector Connects the DVI-D cable to the monitor. 6 VGA Connector Connects the VGA cable to the monitor. 7 USB
Résumé du contenu de la page N° 15
Routing and Connecting the Cables 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Remove the cable routing cover by pulling it straight off the front of the column. Figure 3-3 Removing the Cable Routing Cover 3. Before connecting the cables, route them through the cable routing hole in the column (1) and replace the cable routing cover (2). Figure 3-4 Routing Cables 4. Connect a VGA signal cable, DVI-D signal cable, or DisplayPort signal cable. ENWW Routing
Résumé du contenu de la page N° 16
NOTE: The monitor is capable of supporting either analog or digital input. The video mode is determined by the video cable used. The monitor will automatically determine which inputs have valid video signals. The inputs can be selected by pressing the +/Source button on the front panel or through the On-Screen Display (OSD) feature by pressing the Menu button. For analog operation, use the VGA signal cable provided. Connect the VGA signal cable to ● the VGA connector on the rear of the monitor a
Résumé du contenu de la page N° 17
Connecting USB Devices The monitor provides USB connectors on the side panel and on the rear panel that can be used to connect devices such as a digital camera, USB keyboard, or USB mouse. NOTE: You must connect the USB hub cable from the monitor to the computer to enable the USB 2.0 ports on the monitor. Refer to Step 5 in Routing and Connecting the Cables on page 7. Figure 3-6 Connecting USB Devices Adjusting the Monitor 1. Tilt the monitor's panel forward or backward to set it to a comfortab
Résumé du contenu de la page N° 18
2. Swivel the monitor to the left or right for the best viewing angle. Figure 3-8 Swiveling the Monitor 3. Adjust the monitor's height so that it is parallel to your eye height for a comfortable viewing position. A lock-down/release button on the back of the column prevents the display head from sliding up when the monitor is lifted. If the display head is locked in the lowest height position: a. Make sure that the monitor is safely positioned on a stable surface. b. Gently push down on the dis
Résumé du contenu de la page N° 19
4. Raise the monitor panel to its highest position and pivot the monitor clockwise from landscape to portrait orientation viewing to adapt to your application. NOTE: It may be necessary to tilt the monitor panel back to prevent the corner of the panel from coming in contact with the base when pivoting. Figure 3-10 Pivoting the Monitor NOTE: To view information on the screen in portrait mode, you will need to install the Pivot Pro software included on the software and documentation CD. The posit
Résumé du contenu de la page N° 20
The monitor automatically scans the signal inputs for an active input and uses that input for the display. If two or more inputs are active, the monitor will display the default input source. If the default source is not one of the active inputs, then the monitor will display the highest ranking priority input in the following order: DisplayPort, DVI, then VGA. You can change the default source in the OSD by pressing the front panel menu button and selecting Source Control > Default Source. Remo
