Résumé du contenu de la page N° 1
HP Compaq L2206tm and L2206tmp LED
Backlit Touch Monitors
User Guide
Résumé du contenu de la page N° 2
© 2012 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained he
Résumé du contenu de la page N° 3
About this guide This guide provides information on setting up the monitor, operating the touch screen, troubleshooting, and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supplemental information. iii
Résumé du contenu de la page N° 4
iv About this guide
Résumé du contenu de la page N° 5
Table of contents 1 Product features ............................................................................................................... 1 HP LCD Touch Monitors ............................................................................................................ 1 2 Setting up the monitor ...................................................................................................... 3 Unfolding the monitor pedestal base ................................................
Résumé du contenu de la page N° 6
vi
Résumé du contenu de la page N° 7
1 Product features HP LCD Touch Monitors The LCD (liquid crystal display) monitors have an active matrix, thin-film transistor (TFT) panel. The monitor models and features include: ● L2206tm model, 54.6 cm (21.5-inch) diagonal viewable area display with 1920 x 1080 resolution, plus full-screen support for lower resolutions; includes custom scaling for maximum image size while preserving original aspect ratio ● L2206tmp model, 54.6 cm (21.5-inch) diagonal viewable area display with 1920 x 1080 re
Résumé du contenu de la page N° 8
● Passive stylus docked in rear enclosure ● HDCP copy protection on DVI and DisplayPort inputs ● Software and documentation disc that includes monitor drivers and product documentation ● Energy saver feature to meet requirements for reduced power consumption ● Intelligent Management AssetControl ● Compliant with the following regulated specifications (for additional certifications and agency notices, refer to the HP LCD Monitors Reference Guide on the disc included with this monitor): ◦ European
Résumé du contenu de la page N° 9
2 Setting up the monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, and then follow the instructions below. Unfolding the monitor pedestal base 1. Lift the monitor from its box and place it face down on a flat surface. 2. Hold down the monitor base with one hand (1) then grasp the top of the stand with the other hand and unfold the display head 90 degrees (2). CAUTION: Do not touch the surface of the LCD panel. Pressure
Résumé du contenu de la page N° 10
Rear components Figure 2-2 Rear components Component Description 1 AC power connector Connects the AC power cable to the monitor. 2 DisplayPort Connects the DisplayPort cable to the monitor. 3 VGA connector Connects the VGA cable to the monitor. 4 DVI-D connector Connects the DVI-D cable to the monitor. 5 Audio connector Connects the audio cable to the monitor. 6 USB upstream connector Connects the USB hub cable to the monitor's USB hub connector and to a host USB port/hub. 7 USB downstream con
Résumé du contenu de la page N° 11
Connecting the cables 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Remove the cable management clip from the pedestal by pulling outward on the two sides of the clip (1) and lifting the clip off the pedestal (2). Figure 2-3 Removing the cable management clip 3. Connect a VGA signal cable, DVI-D signal cable, or DisplayPort signal cable. NOTE: The monitor is capable of supporting either analog or digital input. The video mode is determined by the video cab
Résumé du contenu de la page N° 12
6. Connect one end of the power cord to the AC power connector on the back of the monitor, and connect the other end to an electrical wall outlet. Figure 2-4 Connecting the cables WARNING! To reduce the risk of electric shock or damage to the equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Disconnect power from the equipment by unplu
Résumé du contenu de la page N° 13
Adjusting the monitor NOTE: Your monitor model may look different than the model in the following illustrations. 1. Tilt the monitor's panel forward or backward to set it to a comfortable eye level. Figure 2-6 Tilting the monitor 2. Adjust the monitor’s height to a comfortable position for your individual workstation. The monitor’s top bezel edge should not exceed a height that is parallel to your eye height. A monitor that is positioned low and reclined may be more comfortable for users with c
Résumé du contenu de la page N° 14
3. Pivot the monitor from landscape to portrait orientation viewing to adapt to your application. a. Adjust the monitor to full-height position and tilt the monitor back to full-tilt position (1). b. Pivot the monitor clockwise 90° from landscape to portrait orientation (2). CAUTION: If the monitor is not in full-height and full-tilt position when pivoting, the bottom right corner of the monitor panel will come in contact with the base and potentially cause damage to the monitor. Figure 2-8 Piv
Résumé du contenu de la page N° 15
Front components Figure 2-9 Front components Table 2-1 Front components Component Description 1 Menu button Opens, selects from, or exits the OSD menu. 2 Minus/volume button If the OSD menu is on, press to navigate backward through the OSD menu and decrease adjustment levels. If the OSD menu is inactive, press to activate the volume adjustment menu. 3 Plus/source button If the OSD menu is on, press to navigate forward through the OSD menu and increase adjustment levels. If the OSD menu is inac
Résumé du contenu de la page N° 16
Turning on the monitor 1. Press the power button on the computer to turn it on. 2. Press the power button on the front of the monitor to turn it on. CAUTION: Burn-in image damage may occur on monitors that display the same static image on- screen for 12 or more consecutive hours of non-use. To avoid burn-in image damage on the monitor screen, you should always activate a screen saver application or turn off the monitor when it is not in use for a prolonged period of time. Image retention is a co
Résumé du contenu de la page N° 17
Connecting USB devices USB connectors are used to connect devices such as a digital camera, USB keyboard, or USB mouse. Two USB connectors are located on the side panel of the monitor. NOTE: You must connect the USB hub cable from the monitor to the computer to enable the USB 2.0 ports on the monitor. Refer to Step 4 in Connecting the cables on page 5. Figure 2-10 Connecting USB devices Connecting USB devices 11
Résumé du contenu de la page N° 18
Removing the monitor pedestal base You can remove the monitor panel from the pedestal base to install the panel on a wall, swing arm, or other mounting fixture. CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected. Also disconnect all USB cables connected to the monitor. 1. Disconnect and remove the signal, power, and USB cables from the monitor. 2. Lay the monitor face down on a flat surface covered by a cl
Résumé du contenu de la page N° 19
Mounting the monitor The monitor panel can be attached to a wall, swing arm, or other mounting fixture. NOTE: This apparatus is intended to be supported by a UL or CSA listed wall mount bracket. 1. Remove the monitor panel from the pedestal base. Refer to Removing the monitor pedestal base on page 12. CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long screws are required.
Résumé du contenu de la page N° 20
Locating the rating labels The rating labels on the monitor provide the spare part number, product number, and serial number. You may need these numbers when contacting HP about the monitor model. The rating labels are located on the rear panel of the monitor display head. Figure 2-14 Locating the rating labels Installing a cable lock You can secure the monitor to a fixed object with an optional cable lock available from HP. Figure 2-15 Installing a cable lock 14 Chapter 2 Setting up the mon
