Instruction d'utilisation Graco Sound Sleep

Résumé du contenu de la page N° 1

Failure to follow these warnings
Please read this Owner’s
SoundSleep
and the assembly instructions could
Manual completely BEFORE
result in serious injury or death.
first use of your monitor! Pay
Nursery
special attention to the warn-
This device is designed only to monitor the sounds of your child. It will
ings. Keep these instructions not alert you to your child’s silent activities. This product is not
Monitor designed or intended for use as a medical monitor. Always be sure that
for future r

Résumé du contenu de la page N° 2

Product Features FRONT VIEW: REAR VIEW: Antenna Antenna Power Light Channel Channel Selector* Hand Grip Selector* Belt Clip Power Light AC Adapter Jack On/Off AC On/Off/ Switch Adapter Volume Jack Control Nursery Unit (Transmitter) Side Parent’s Unit Slot (Receiver) *Both the Parent’s Unit and the Nursery Unit MUST be set to AC Adapters the same channel. If receiver detects sounds from another (2 included) Battery nursery monitor or cordless phone, set both units to the other channel. If proble

Résumé du contenu de la page N° 3

Installing A Battery Using AC Adapters ® The Parent’s Unit can use either a Use ONLY the Graco adapters Battery changing should only be battery or standard 120 volt AC included with the unit. Do not use done by an adult. household current. The Nursery these adapters with other equipment under any circumstances. Unit uses standard 120 volt AC The Parent’s Unit can be operated Push in household current only. The included on battery power. If units do not work, check that AC AC adapters must be use

Résumé du contenu de la page N° 4

System Setup Solving Problems Most problems have a simple solution. First, check that: SETTING UP TESTING THE UNITS ! Power is turned ON for both units THE MONITOR ! Both units are plugged in (or battery is fresh in Parent’s Unit) It is VERY IMPORTANT to test the ! Electrical outlet works system when first set up, and at regular 1. Check that both Nursery Unit ! Units are set to same channel times thereafter. Test the units any time and Parent’s Unit are set to the ! Volume is turned up on Pa