Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
Elo Entuitive Touchmonitor User Guide 12.1" LCD Desktop Touchmonitor 1224L Series Revision A P/N 008546 Elo TouchSystems, Inc. 1-800-ELOTOUCH www.elotouch.com
Résumé du contenu de la page N° 3
Copyright © 2001 Elo TouchSystems Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo TouchSystems. Disclaimer The information in this document is subject to change without notice. Elo TouchSystems makes no
Résumé du contenu de la page N° 4
iv
Résumé du contenu de la page N° 5
Table of Contents Display Angle . . . . . . . . . . . . . . . . . . 16 Chapter 1 Introduction 1 Chapter 4 Product Description . . . . . . . . . . . . . . . . 1 Troubleshooting 17 Precautions . . . . . . . . . . . . . . . . . . . . 1 Solutions to Common Problems . . . . . . . . 17 About the Product . . . . . . . . . . . . . . . . . 2 Appendix A Chapter 2 Native Resolution 19 Installation and Setup 3 Unpacking Your Touchm
Résumé du contenu de la page N° 6
Copyright © 1996, Borland International. All rights reserved. BORLAND CONFIDENTIAL December 11, 2001 3:27 pm (D:\Vera new\8546 12 in Econ AT UG\12.1 Econ. ATTOC.fm) vi
Résumé du contenu de la page N° 7
C H A P TER 1 C HAPT ER 1INTRODUCTION Product Description Congratulations on your purchase of an Elo TouchSystems Entuitive touchmonitor. Your new touchmonitor combines the reliable performance of Elo’s touch technology with the latest advances in LCD display design. This combination of features creates a natural flow of information between a user and your touchmonitor. This LCD monitor incorporates 12.1” color active matrix thin-film-transistor (TFT) liquid crystal display to provide super
Résumé du contenu de la page N° 8
About the Product Your LCD Desktop Touchmonitor is a 12.1” XGA TFT color display with the following features: High contrast color TFT LCD display support resolution up to SVGA 800x600. Compatible with IBM VGA and VESA. Power management system conforms to VESA DPMS standard. Universal power adapter. Supports DDC1/2B for Plug & Play compatibility. Advanced OSD control for picture quality adjustment. Detachable stand for wall-mounting application. Optional video-in function. Opti
Résumé du contenu de la page N° 9
C H A P TER 2 C HAP TER 2INSTALLATION AND SETUP This chapter discusses how to install your LCD touchmonitor and how to install Elo TouchSystems driver software. Unpacking Your Touchmonitor Check that the following 8 items are present and in good condition: Serial cable VGA cable European power cable Brick power supply CD and Quick Install Power cable US/Canada Guide 2-3
Résumé du contenu de la page N° 10
Product Overview Main Unit Rear View 2-4 Elo Entuitive Tou chmon ito r User Guide
Résumé du contenu de la page N° 11
Touch Interface Connection NOTE: Before connecting the cables to your touchmonitor and PC, be sure that the computer and touchmonitor are turned off. 1 Connect one end of the power adapter to the monitor and the other end to the connector of the power cord. 2 Connect one end of the video cable to the rear side of computer and the other to the LCD monitor. Tighten by turning the two thumb screws clockwise to ensure proper grounding. 3 Connect one end of the touchscreen (RS232) cable to the
Résumé du contenu de la page N° 12
Installing the Driver Software Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operating systems: Windows 2000 Windows Me Windows 98 Windows 95 Windows NT 4.0 Additional drivers and driver information for other operating systems (including MS DOS, Windows 3.x, OS/2, Macintosh and Linux) are available on the Elo TouchSystems web site at www.elotouch.com. Your Elo touchmon
Résumé du contenu de la page N° 13
Installing the Serial Touch Driver Installing the Serial Touch Driver for Windows 2000, Me, 95/98 and NT 4.0 NOTE: For Windows 2000 and NT 4.0 you must have administrator access rights to install the driver. 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. 2 If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the CD and starts the setup program. 3 Follow the directions on the screen to complete the driver setup for your version of Windows. 4 If
Résumé du contenu de la page N° 14
Installing the Serial Touch Driver for MS-DOS and Windows 3.1 You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to continue using your mouse along with your touchmonitor in DOS. To install Windows 3.x and MS-DOS from Windows 95/98, follow the directions below: 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. 2 From DOS, type d:\EloDos_W31 to change to the correct directory on the CD-ROM (your CD-ROM drive may be mapped to a different drive letter).
Résumé du contenu de la page N° 15
C H A P TER 3 C HAP TER 3OPERATION About Touchmonitor Adjustments Your touchmonitor will unlikely require adjustment. Variations in video output and application may require adjustments to your touchmonitor to optimize the quality of the display. For best performance, your touchmonitor should be operating in native resolution, that is 800x600 at 60-75 Hz. Use the Display control panel in Windows to choose 800x600 resolution. Operating in other resolutions will degrade video performance. For f
Résumé du contenu de la page N° 16
Control Function Turns the display system power on or off. Power Switch 1 Indicates a different status when this unit operates Power LED 2 in different modes. Displays the OSD menus on the screen and used to Menu/Select 3 select (“Up” direction) the OSD control options on the screen. Displays the OSD menus on the screen and used to Menu/Select 4 select (“Down” direction) the OSD control options on the screen. Adjusts the increasing value of the selected OSD + 5 control option. − (1) A
Résumé du contenu de la page N° 17
1 Power Connector Connect the power adapter. 2 Video Connector This can be connected with the D-sub 15 pin signal connector. 3 Touchscreen connector This is for connecting the touch panel RS232 connector. (optional) 3-11
Résumé du contenu de la page N° 18
Controls and Adjustment OSD Menu Functions To Display and Select the OSD Functions: 1 Press once to display the OSD function main menu. 2 Press a second time to select the different OSD control option. To Adjust the Value of the Control Option: 1 Pressing + / - button changes the value of the selected OSD control option. After adjusting the values, the monitor will automatically save the changes. To select the input source (for models with video-in function only.) Press - to select input sour
Résumé du contenu de la page N° 19
OSD Control Options OSD Menu Page 1/4 OSD Menu Page 4/4 (for models with video-in function) Brightness Adjust the brightness using + and − buttons. Contrast/Red, Green, Blue Adjust the contrast using + and − buttons, or adjust the values of color gain (RED, GREEN or BLUE) using + and − buttons. Saturation (for models with video-in function only) Adjust the video image color saturation using + and – buttons. Hue (for models with video-in function only) Adjust the video image hue u
Résumé du contenu de la page N° 20
Horizontal Position Pressing + moves the display image to the right; Pressing − moves the display image to the left. Vertical Position Pressing + moves the display image upward; Pressing − moves the display image downward. Frequency This item is used to decrease the vertical interference. 1 Select one display pattern from your computer. 2 Use + and − buttons on the LCD monitor to decrease the vertical interference to get the optimal display. Phase This item is used to decrease the hori
