Résumé du contenu de la page N° 1
User’s Manual
FlexScan
T561
Color Display Monitor
Résumé du contenu de la page N° 2
SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates a prohibited action. Indicates to ground for safety. Copyright© 2000 by EIZO NANAO CORPORATION. All rights reserved. No par
Résumé du contenu de la page N° 3
ENGLISH CONTENTS PRECAUTIONS ............................................................................. 4 1. INTRODUCTION ............................................................................ 9 1-1. Features ....................................................................................................... 9 1-2. Package Contents ........................................................................................ 9 1-3. Controls & Connectors ....................................
Résumé du contenu de la page N° 4
PRECAUTIONS IMPORTANT! This product has been adjusted specifically for use in the region to which it was originally shipped. The performance of the product, (i.e. picture geometry, picture positioning and color convergence and purity in the case of color monitors) is optimally adjusted to the earth’s magnetic field of the specific destination. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. To ensure personal s
Résumé du contenu de la page N° 5
ENGLISH WARNING Keep small objects away from the monitor. Small objects may accidentally fall through the ventilation slots into the cabinet, leading to fire, shock, or equipment damage. Keep liquids away from the monitor. Spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the monitor immediately. Have the unit checked by a qualified service engineer before using it again. Place the monitor on a
Résumé du contenu de la page N° 6
WARNING Use the enclosed power cord. If using the power cord other than the enclosed one, use the following cord. [USA and Canada] Use a UL LISTED/CSA LABELED or CERTIFIED power cord set meeting the following specifications. * Rating: min. 125 V, 10 A * Length: max. 2.0 m * Plug type: NEMA 5-15P, Parallel blade, Grounding type, 125 V, 10 A * Type: SVT [Europe] Use a proper European standard approved power cord meeting the following specifications. * Rating: min. 250 V, 10 A * Length: max. 2.
Résumé du contenu de la page N° 7
ENGLISH CAUTION Handle with care when carrying the monitor. * Disconnect the power cord, signal cables and remove the optional i·Sound™ sound unit (if applicable). Moving the monitor with the cord attached or lifting it by the i·Sound™ sound unit is dangerous. It may result in injury or equipment damage. * Note that the monitor is heavier at the front than at the rear. Do not move it alone. Always work with another person. * The screen is optically coated to reduce glare. Keep hard objec
Résumé du contenu de la page N° 8
CAUTION Do not touch the plug with wet hands. Touching the plug with wet hands is dangerous and can cause electrical shock. Use an easily accessible power outlet. This will ensure that you can disconnect the power quickly in case of a problem. Unplug the monitor before cleaning it. Cleaning the monitor while it is plugged into a power outlet may result in electric shock. Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong sol
Résumé du contenu de la page N° 9
ENGLISH 1. INTRODUCTION Thank you very much for choosing EIZO FlexScan T561. 1-1. Features High contrast natural flat type CRT. Dual inputs with individual color configuration. 1-2. Package Contents Please contact your local dealer for assistance if any of the listed items are missing or damaged. Monitor Signal Cable (MD-C87/MD-C100) Power Cord User’s Manual EIZO CRT Utility Disk Warranty Registration Card Please retain the packing materials for future transference. 1. INTRODUC
Résumé du contenu de la page N° 10
1-3. Controls & Connectors Front (1) ScreenManager™ (1) (2) BNC/D-SUB Selection Button (3) AUTO-SIZING Button (4) Power Terminal Covers for the Optional i·Sound Sound Unit. (Bottom side) (2) (7) (5) QuickSet™ Control Pad (3) (4) (5)(6) (Hereinafter “Control Pad”) (6) Power Indicator Indicated color Power-on status Green Power is on (Normal mode) Flashing Green Power save mode 1 Advance notice of monitor’s off timer (See page 18) Yellow Power save mode 2 Flashing Yellow Power save mode with monit
Résumé du contenu de la page N° 11
ENGLISH 2. INSTALLATION 2-1. Connecting the monitor to the PC Be sure that the power switches of both of the PC and the monitor are OFF. 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC. After connecting, secure the connection with the screw-in fasteners. Standard graphics board Video Output Connector D-Sub mini 15 pin Standard graphics board Signal Cable (Enclosed) Macintosh Video Output Connector D
Résumé du contenu de la page N° 12
2. Plug the power cord into the power connector at the rear of the monitor. Then plug the other end of the cord into a power outlet. WARNING The equipment must be connected to a grounded main outlet. Use the enclosed power cord. If using the power cord other than the enclosed one, use the following cord. [USA and Canada] Use a UL LISTED/CSA LABELED or CERTIFIED power cord set meeting the following specifications: * Rating: min. 125 V, 10 A * Length: max.2.0 m * Type: SVT * Plug type: NEMA
Résumé du contenu de la page N° 13
ENGLISH 2-2. Getting Ready for Operation Try each setting procedure if necessary in the following cases. The display image size and / or position is incorrect Press the AUTO-SIZING button on the front panel. The AUTO-SIZING function centers the displayed image, aligning the image’s borders with respect to the monitor frame. In general, press the AUTO-SIZING button whenever changing the graphics board or the p.30) resolution , or when image size and/or position is incorrect. If further adjustm
Résumé du contenu de la page N° 14
3. SCREEN ADJUSTMENT Allow the monitor to stabilize for at least 30 minutes before making image adjustments. Up 3-1. How to use the ScreenManager Enter Left Use the control pad on the front panel. The control pad can be Right pressed in 5 directions, “Enter”, “Up”, “Down”, “Left” and “Right”. Down 1. Entering the ScreenManager. Display the ScreenManager Main menu by pressing the “Enter” of the control pad. Main menu Main menu displays the current connector type and frequency of the input sig
Résumé du contenu de la page N° 15
ENGLISH 3-2. Adjustments and Settings Main menu Sub menu Adjustments and Settings See page Contrast — Screen contrast and brightness* — Size — Screen size — Position — Screen position — Screen Side Pin. Side pin balance — Trapezoidal Distortion — Tilt Inclination — p.29) Convergence Convergence — p.29) Moiré Reduction Moiré — Fine Contrast To brighten the photo or picture image. p.16 Signal Filter To decrease the slightly shadowed images or characters. p.16 Video Level To set the
Résumé du contenu de la page N° 16
< Screen > To brighten the photo or picture image < Fine Contrast > Select “Picture Mode”. * Select “Text Mode” to display the text on word processor or calculating software. * The AUTO-SIZING button can be customized to active this function easily (See page 19). To decrease a slightly shadowed image or character When the characteristics of the graphics board does not match those of the monitor, the characters and images displayed may have a slight shadow on their right side. < Signal Filt
Résumé du contenu de la page N° 17
ENGLISH < Color > To set the color temperature Temperature can be set from 4,000 K to 10,000 K, in 500 K increments. (Including the 9,300 K default setting.) < Temperature> Select “Color temperature”. “Standard” mode To adjust each color , (Red, Green and Blue) p.29) p.29 Adjust the “Cutoff” and “Gain” ), and make appropriate color tone. (1) First, set the monitor to maximum contrast and brightness. (2) < Temperature> Set the color temperature that is close to the desired color. “Custom” mo
Résumé du contenu de la page N° 18
< Others > To set the power save There are two power save settings choose the setting which matches your environment. Do your part to conserve energy, turn off the monitor when you are finished using it. Complete energy use can only be accomplished by disconnecting the monitor’s power supply cord from the plug receptacle. p.30) 1. With PC’s power saving system (VESA DPMS ) The monitor detects the signal from the PC and executes the power saving accordingly, as shown in the table below. < P
Résumé du contenu de la page N° 19
ENGLISH To degauss the monitor < Degauss > Press the center of the control pad. * The degauss circuitry takes about 30 minutes to regain maximum power following degaussing. To customize the button function (Auto sizing or Fine Contrast) < Button Setting > Select “Auto Sizing”(Auto sizing function ) or “Fine Contrast”(Brighten the photo or picture image ). To adjust the menu position of the ScreenManager < Menu Position > Adjust the menu position as desired by u
Résumé du contenu de la page N° 20
3-3. Special Function Shortcut Keys The brightness and contrast can be adjusted by pressing the Up, Down, Left and Right keys of the control pad directly. Press the center of the control pad to save and exit the settings after the adjustment. Adjustment Lock Use the “Adjustment Lock” function, to prevent any accidental changes. Locked function Adjustments and settings in the ScreenManager. AUTO-SIZING button. Unlocked function Adjustment of contrast and brightness by the shortcut keys.
