Résumé du contenu de la page N° 1
User's Manual
P772 LCD Monitor
Résumé du contenu de la page N° 2
Federal Communications Commission (F.C.C.) Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication
Résumé du contenu de la page N° 3
Congratulations! The display you have just purchased carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment. Some of the features of the TCO'03 Display requirements: Ergonomics • Good visual ergonomics and image quality in order to i
Résumé du contenu de la page N° 4
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS .............................................................. 2 INTRODUCTION ............................................................................................... 3 Product Description ................................................................................... 3 Package Overview ...................................................................................... 3 Installation of the Monitor Arm ................................
Résumé du contenu de la page N° 5
IMPORTANT SAFETY INSTRUCTIONS Please read the following instructions carefully. This manual should be retained for future reference. 1. To clean the LCD Monitor screen make sure the Monitor is in the power off mode. Unplug the Monitor from its power source before cleaning it. Stand away from the LCD Monitor and spray cleaning solution onto a rag. Without applying excessive pressure clean the screen with the slightly dampened rag. 2. Do not place your LCD Monitor near a window. Exposing the Monit
Résumé du contenu de la page N° 6
INTRODUCTION Product Description Congratulations on purchasing this new generation monitor. Your LCD monitor incorporates high quality display into a small light-weight module. It has power-saving capabilities and emits no X-ray radiation. The features are: • 17" TFT Liquid Crystal Display • Compatible with IBM VGA, VESA • Direct RGB input • Direct DVI input • SXGA 1280x1024 resolution, up to 16M colors • Lightweight compact design, weighting less than 6.6 Kgs • DPMS (power saving) Compatible •
Résumé du contenu de la page N° 7
INTRODUCTION Installation of the Monitor Arm CAUTION 1. The Monitor Arm is an optional item. 2. The Arm Mounting Device must be VESA Flat Physical Mounting Interface Standard. 3. Please fix LCD monitor to monitor arm with 4x12mm screw. 4 ♦♦♦ English
Résumé du contenu de la page N° 8
INTRODUCTION Recommended Use of the Monitor • Power – Use the type of power indicated on the marking label. • Plugs – Do not remove any of the prongs of the monitor's three-pronged power plug. – Disconnect the power plug from the AC outlet if you are not going to use it for an indefinite period of time. • Power cords – Use the proper power cord with correct attachment plug type. If the power source is 120 VC, use a power cord that has UL and CSA approvals. If the power source is a 240 VAC supply
Résumé du contenu de la page N° 9
INTRODUCTION LCD Monitor Base Installation Guide 1. First attach the back cover to the 3. Using a flathead screwdriver, insert monitor. Carefully match up the three the screws and tighten in the direction hinges at the top of the cover with the indicated. three corresponding slots; slide and lock into place. 2. Once the back cover is attached, you can rotate it down to a fully closed position. 6 ♦♦♦ English
Résumé du contenu de la page N° 10
INTRODUCTION Guidelines for Operating the Viewing Angle of LCD Monitor 1. Height Adjustment 3. Rotate You can adjust the height of the The monitor screen can be swiveled monitor by securely holding the base left or right by holding the monitor with one hand and pulling up the support at the top, grabbing the edge monitor stand with the other. The of the screen and turning it to face 35 height of the monitor can be be degrees left or right. adjusted from 383.5mm to 502.5mm. 2. Backward/Forward An
Résumé du contenu de la page N° 11
CONTROLS AND ADJUSTMENTS Once you have installed this monitor with your system, please read the instructions in this section, they give you some guidelines on how to use the monitor more efficiently. And lead you through the various functions of the user controls and explain how to adjust the monitor to your personal preference. Front User Controls (1) Enter " ↵ ↵ ↵ ↵ ↵ " button To display the OSD manual and select functions. (2) Down " ∇ ∇ ∇ ∇ ∇" button To adjust the selected OSD function or t
Résumé du contenu de la page N° 12
CONTROLS AND ADJUSTMENTS OSD Directly Adjustment BRIGHTNESS Press the "∇" button to enter the brightness, and press the "∇" or "∆ " button to increase or decrease the brightness level, then press " ESC" button to exit. CONTRAST Press the "∆ " button to enter the contrast, and press the "∇" or "∆ " button to increase or decrease the contrast level, then press " ESC" button to exit. AUDIO • Normal Mode a. Press the " ESC " button to enter sound playing mode in mute mode b. Press the " ESC " button
Résumé du contenu de la page N° 13
CONTROLS AND ADJUSTMENTS 2. Auto-Tune Here are some items which can be adjusted as below, please press " ↵ " to enter the item menu. • Auto Geometry Auto Geometry Press " ↵ " button, the system will automatically adjust the Press clock, phase, H-position and V-position values for optimal settings. ADVANCED AUTO TUNE PATTERN PROGRAM USAGE GUIDE • AUTO_TUNE.exe is used for Windows the display mode adjustment. It will adjust the VGA input level and video quality to optimum. • DOS_TUNE.exe is used f
Résumé du contenu de la page N° 14
CONTROLS AND ADJUSTMENTS 3. Color You can choose either the 6500°k, 9300°K color temperature mode, User mode or Motion Picture to store your user defined color settings. • User Mode a. Press " ↵ " button to enter User mode. b.Press the "∇" or "∆ " button to select the R/G/B gain , then press " ↵ " button to proceed. c. Press "ESC" button to leave this function. • Motion Picture Mode Press " ↵ " button to enter Motion Picture mode. a. Saturation: Press the "∇" or "∆ " button to adjust Saturation.
Résumé du contenu de la page N° 15
CONTROLS AND ADJUSTMENTS 4. Image Here are some items which can be adjusted as below, please press " ↵ " to enter the item menu. • Clock: Press the "∇" or "∆ " button to adjust the width of the screen. • Phase: Press the "∇" or "∆ " button to reduce the noise on the screen. • Image Position a.H - Position: Press the "∇" or "∆ " button to reposition the Image to the right or left. b.V - Position: Press the"∇" button to move the Image downwards and "∆ " to move it upwards. • Smooth: Press the "∇"
Résumé du contenu de la page N° 16
CONTROLS AND ADJUSTMENTS 5. Language Press the "∇" or "∆ " button to select between English, German, French, Spanish or Italian languages. 6. Source Press the "∇" or "∆ " button to select "DVI" or "VGA". 7. OSD Setting To adjust the OSD position. • H - Position: Press the "∇" or "∆ " button to reposition the OSD window to the right or left. • V - Position: Press the"∇" button to move the OSD window downwards and "∆ " to move it upwards. • Center: The OSD window will be adjusted automatically to
Résumé du contenu de la page N° 17
CONTROLS AND ADJUSTMENTS On Screen Display (OSD) Main menu (DVI) 1. Press " ↵ ↵ ↵ ↵ ↵ " to open the OSD main menu. 2. Use the "∇" and " ∆ " buttons to move through the displayed functions. 3. Press " ↵ ↵ ↵ ↵ ↵ " to confirm your selected function. 1. Volume Press " ↵ ↵ ↵ ↵ ↵ " to adjust volume and enter sound playing mode. a. Press "∇" or "∆ " to adjust volume . b. Press " ESC " to leave this function. 2. Auto-Tune Auto-Tune is disabled in DVI mode. 14 ♦♦♦ English
Résumé du contenu de la page N° 18
CONTROLS AND ADJUSTMENTS 3. Color You can choose either the 6500°k, 9300°K color temperature mode, User mode or Motion Picture to store your user defined color settings. • User Mode a. Press " ↵ " button to enter User mode. b.Press the "∇" or "∆ " button to select the R/G/B gain , then press " ↵ " button to proceed. c. Press "ESC" button to leave this function. • Motion Picture Mode Press " ↵ " button to enter Motion Picture mode. a. Saturation: Press the "∇" or "∆ " button to adjust Saturation.
Résumé du contenu de la page N° 19
CONTROLS AND ADJUSTMENTS 5. Language Press the "∇" or "∆ " button to select between English, German, French, Spanish or Italian languages. 6. Source Press the "∇" or "∆ " button to select "DVI" or "VGA". 7. OSD Setting To adjust the OSD position. • H - Position: Press the "∇" or "∆ " button to reposition the OSD window to the right or left. • V - Position: Press the"∇" button to move the OSD window downwards and "∆ " to move it upwards. • Center: The OSD window will be adjusted automatically to
Résumé du contenu de la page N° 20
CONTROLS AND ADJUSTMENTS Energy Declaration This monitor is equipped with a function for saving energy, which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer. The time settings for switching to a power saving mode are adjusted from the system unit by software. From the first indication of inactivity to power saving position the total time must not be set to more than 70 minutes. Power Consumption (120/230 Vac) Ne U
