Résumé du contenu de la page N° 1
19-inch LCD Flat Panel Monitor
UML-19P-90
en User’s Manual
Résumé du contenu de la page N° 2
UML-19P-90 LCD Monitor Table of Contents | en iii Table of Contents 1Safety 1 1.1 Important Safety Instructions 1 1.2 Safety Precautions 2 1.3 Important Notices 3 1.4 Customer Support and Service 7 2 Unpacking 9 2.1 Parts List 9 3 Exploded View 9 4Description 10 4.1 Features 10 4.2 Power 11 5 Installing the Monitor 11 5.1 Ventilation 11 5.2 Mounting the Monitor 11 5.2.1 Desktop Installation 11 5.2.2 Wall Mount Installation 11 5.2.3 Rack-mount Installation 12 5.3 Connecting the PC Signal to the M
Résumé du contenu de la page N° 3
iv en | Table of Contents UML-19P-90 LCD Monitor F01U099396 | 1.0 | 2008.11 User’s Manual Bosch Security Systems, Inc.
Résumé du contenu de la page N° 4
UML-19P-90 LCD Monitor Safety | en 1 1Safety 1.1 Important Safety Instructions Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit. 1. Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions provided with the unit. Generally, using a dry cloth for cleaning is sufficient, but a moist fluff-free cloth or leather shammy may also be used. Do not
Résumé du contenu de la page N° 5
2 en | Safety UML-19P-90 LCD Monitor 11. Power sources - Operate the unit only from the type of power source indicated on the label. Before proceeding, be sure to disconnect the power from the cable to be installed into the unit. – For battery powered units, refer to the operating instructions. – For external power supplied units, use only the recommended or approved power supplies. – For limited power source units, this power source must comply with EN60950. Substitutions may damage the uni
Résumé du contenu de la page N° 6
UML-19P-90 LCD Monitor Safety | en 3 WARNING! Medium risk: Indicates a potentially hazardous situation. If not avoided, this could result in serious bodily ! injury or death. CAUTION! Medium Risk Indicates a potentially hazardous situation. If not avoided, this may result in minor or ! moderate injury. Alerts the user to important instructions accompanying the unit. CAUTION! Low risk: (without safety alert symbol) Indicates a potentially hazardous situation. If not avoided, this may result in
Résumé du contenu de la page N° 7
4 en | Safety UML-19P-90 LCD Monitor connection to grounding electrodes, and requirements for the grounding electrode. NOTICE! This device is intended for use in public areas only. i U.S. federal law strictly prohibits surreptitious recording of oral communications. Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working
Résumé du contenu de la page N° 8
UML-19P-90 LCD Monitor Safety | en 5 Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security Systems recommends multiple, redundant recording systems, and a procedure to back up all analog and digital information. NOTICE! This is a class A product. In a domestic environment this product may cause radio i
Résumé du contenu de la page N° 9
6 en | Safety UML-19P-90 LCD Monitor Au besoin, l’utilisateur consultera son revendeur ou un technicien qualifié en radio/télévision, qui procédera à une opération corrective. La brochure suivante, publiée par la Commission fédérale des communications (FCC), peut s’avérer utile : « How to Identify and Resolve Radio- TV Interference Problems » (Comment identifier et résoudre les problèmes d’interférences de radio et de télévision). Cette brochure est disponible auprès du U.S. Government Printi
Résumé du contenu de la page N° 10
UML-19P-90 LCD Monitor Safety | en 7 1.4 Customer Support and Service If this unit needs service, contact the nearest Bosch Security Systems Service Center for authorization to return and shipping instructions. Service Centers USA Repair Center Telephone: 800-566-2283 Fax: 800-366-1329 E-mail: repair@us.bosch.com Customer Service Telephone: 888-289-0096 Fax: 585-223-9180 E-mail: security.sales@us.bosch.com Technical Support Telephone: 800-326-1450 Fax: 585-223-3508 or 717-735-6560 E-mail: tech
Résumé du contenu de la page N° 11
8 en | Safety UML-19P-90 LCD Monitor F01U099396 | 1.0 | 2008.11 User’s Manual Bosch Security Systems, Inc.
Résumé du contenu de la page N° 12
UML-19P-90 LCD Monitor Unpacking | en 9 2 Unpacking This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately. Verify that all the parts listed in the Parts List below are included. If any items are missing, notify your Bosch Security Systems Sales or Customer Service Representative. The original packing carton is the safest container in which to transport the unit and must be used if returning the unit for se
Résumé du contenu de la page N° 13
10 en | Description UML-19P-90 LCD Monitor Reference # Button Description 4 Adjusts the value when in the Scrolls down in the OSD. OSD or decreases Audio Mute menu. 5 Decreases the value when in Scrolls left in the OSD. the OSD or decreases the volume. 6 Increases the value when in the Scrolls right in the OSD. OSD or increases the volume. 7Not Used 8 Power Button / Power On (green) LED Indicator Unsupported Mode (green) Standby/Power Off (red) Figure 3.2 Bottom Panel Reference # Connec
Résumé du contenu de la page N° 14
UML-19P-90 LCD Monitor Installing the Monitor | en 11 4.2 Power Model No. Rated Voltage Voltage Range Power at Rated Voltage UML-19P-90 120/230 VAC, 100-240 VAC 40 W (max) 50/60 Hz 5 Installing the Monitor This chapter outlines the procedures to install the UML-19P-90. A qualified service person should install the monitor and adhere to all local codes. 5.1 Ventilation To prevent overheating, ensure that the ventilation openings on the rear of the monitor are not covered. 5.2 Mounting the Monit
Résumé du contenu de la page N° 15
12 en | Installing the Monitor UML-19P-90 LCD Monitor 2. Mount the unit to the mounting device (not provided) using the four (4) mounting holes on the rear panel. The square mounting hole patterns are standard on 100 mm (3.9 in.) centers. Figure 5.2 Mounting the Device 5.2.3 Rack-mount Installation To rack the UML-19P-90 using the RMK-08 mounting bracket, do the following: NOTICE! Prior to installing the UML-19P-90 monitor to the RMK-08 rack mount bracket, four (4) user supplied rack mount sc
Résumé du contenu de la page N° 16
UML-19P-90 LCD Monitor Installing the Monitor | en 13 3. If necessary, remove the side brackets from the 8C or current position and screw to the 9V position. 4. Adjust the location of the inner brackets so they align flush with the inner threaded holes on the back of the monitor. 5. Secure the RMK-08 rack mount bracket to the UML-19P-90 flat panel from the back side using the VESA 100 mm mounting points and the supplied four (4), M4*8 Phillips screws. Bosch Security Systems, Inc. User’s Manua
Résumé du contenu de la page N° 17
14 en | Navigating the Monitor UML-19P-90 LCD Monitor 6. Secure the fully assembled rack mount to the cabinet using four (4) rack mount screws and clips (not provided). 5.3 Connecting the PC Signal to the Monitor VGA The monitor can be connected to the analog VGA signal by using the provided VGA cable (D- SUB to D-SUB). Figure 5.4 VGA Input DVI The monitor can be connected to a digital signal by using the provided DVI cable (DVI-D to DVI-D). Figure 5.5 DVI Input 6 Navigating the Monitor 6.1
Résumé du contenu de la page N° 18
UML-19P-90 LCD Monitor Navigating the Monitor | en 15 Reference # Button Description 1 Input Button Selects the signal to be Operates as the Select/ displayed; choices are: Enter key when in the OSD menu. VGA or DVI. 2 Menu Button Selects the on-screen display (OSD). 3 Adjusts the value when in Scrolls up in the OSD. the OSD. 4 Adjusts the value when in Scrolls down in the OSD. the OSD or auto adjusts when in VGA mode. 5 Decreases the value when Scrolls left in the OSD. in the OSD. 6
Résumé du contenu de la page N° 19
16 en | Navigating the Monitor UML-19P-90 LCD Monitor 6.3 On-screen Display Menus There are five (5) on-screen menus that allow you to customize your settings. Press the Menu button on the front panel of the monitor to access the OSD menu, then press the Input button to enter your selection. Icon Menu Function Auto Adjust Adjusts the screen size when input is in DSUB Analog (VGA) mode. Screen Adjusts the Brightness and Contrast in both modes, H. Position, V. Position, Phase Adjust, and Cloc
Résumé du contenu de la page N° 20
UML-19P-90 LCD Monitor Navigating the Monitor | en 17 6.5 Screen To access the Screen submenu, press the Menu button on the front panel of the monitor, then press the left and right arrows to highlight the Screen icon. Next, press the Input button on the front panel to access the Screen submenu options. DVI Digital Mode BRIGHTNESS CONTRAST H. POSITION V. POSITION PHASE ADJUST CLOCK ADJUST 1280x1024 63.9 kHz 60Hz DSUB Analog (VGA) Mode BRIGHTNESS CONTRAST H. POSITION V. POSITION PHASE ADJUST C
