Résumé du contenu de la page N° 1
R
AOM681
6.8” FLAT PANEL COLOR OBSERVATION
MONITOR OWNER’S MANUAL
AOM681 Features:
? 6.8” High Performance Color LCD
? Water Resistant Design
? Built-in Audio Speaker with Volume Control
and 12V Trigger
? 2 Camera (A/V) Input with A/B Select Control
? Backlit Controls and Day/Night Picture Modes
for Nighttime Use
? Auto/Manual Power On
? Sun Visor Included
Visit us at http://www.asaelectronics.com
1
UDIOVOX PECIALIZED PPLICATIONS, L.L.C.
Résumé du contenu de la page N° 2
Important! – Please Read This Manual Before Installing! Congratulations on your purchase of a Voyager AOM681 LCD Observation Monitor. With proper installation and use, your AOM681 is designed to provide you with years of trouble-free operation. This manual contains important information required to properly install and operate the unit. Please read this manual thoroughly before beginning. All Voyager Observation products are strictly intended to be installed as a supplement aid to s
Résumé du contenu de la page N° 3
PACKING CONTENTS: 90 DAY/ 12 MONTH LIMITED WARRANTY Audiovox Specialized Aplications, LLC (the company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of purchase, such defect(s) will be repaired or replaced (at the company's option) without charge for parts and labor repair. After the initial 90 day period and for a perio
Résumé du contenu de la page N° 4
CONTROLS AND OPERATION 1 2 3 4 5 5 1. Power/Stand-By Button The AOM681 has two possible operation modes for turning the unit on/off. In manual mode, the power button is used to turn the unit on/off. In stand-by mode, the unit automatically turns on only when 12V is applied to the stand-by trigger wire. For MANUAL operation, the AOM681 should be wired as follows: The ACC (+12V) lead (red) should be wired to the ACC feed of the vehicle (switched +12V). *Please n
Résumé du contenu de la page N° 5
3. Day/Night Mode Button This control toggles the unit between “Day” and “Night” LCD illumination modes. In the “Day” mode, the LCD backlight intensity is at maximum. In “Night” mode, the LCD backlight is dimmed to a preset level that is more suitable for low light operation. 4. Picture Adjustment Menu Button This control accesses an On-Screen-Display (OSD) menu for four LCD picture adjustments (Brightness, Contrast, Color, and Tint). The first depress of the button accesses the
Résumé du contenu de la page N° 6
INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN INSTALLATION: Before drilling, be sure that no cable or wiring is on the other side. Clamp all wires securely to reduce the possibility of them being damaged during installation and use. Keep all cables away from hot or moving parts, and electrically noisy components. Wiring Definitions: ? Power connection: Pin 1 ACC +12V (Red) Pin 2 Standby Trigger (Blue wire) Pin 3 Ground (Black wire) Pin 4 Audio Trigger (Blue w/white stripe wire)
Résumé du contenu de la page N° 7
6. There are 2 options for connecting the LCD monitor to the junction box. If the application is such that the monitor is in close proximity to the junction box, the AOM681 monitor can be connected directly to the junction box. If the junction box is mounted further from the monitor, use the 5’ intermediate cable included with the AOM681 to connect the monitor to the junction box. If more cable length is needed, additional 5’ lengths of the intermediate cable can be purchased. (See the
Résumé du contenu de la page N° 8
8 / / ACCESSORY ITEM MULTI-AXIS BASES (2 AVAILABLE) UNT 72704 - 4” 2-AXIS BASE MO 72706 - 6” 3-AXIS BASE MOUNT ACCESSORY ITEM (2 AVAILABLE) AOC100B - COLOR CAMERA SWITCHABLE ACCESSORY ITEMS STD/MIRROR IMAGE VCC130 - COLOR CAMERA WITH LOW-LIGHT CEC5 - 5 FT. CAMERA CABLE #10 X 5/16” T. CAMERA CABLE ENHANCEMENT LED’ s CEC15 - 15 F TYPE B CEC18 - 18 FT. CAMERA CABLE SCREWS CEC25 - 25 FT. CAMERA CABLE CEC50 - 50 FT. CAMERA CABLE CEC75 - 75 FT. CAMERA CABLE A B AOM681 LCD MONITOR + – (BLUE) +1
Résumé du contenu de la page N° 9
REAR OBSERVATION INSTALLATION DISTANCE MARKER USE/INSTALLATION -PLACE INDICATOR MARKERS (CONE, BOX ANY REFERENCE OBJECT HANDY) BEHIND VEHICLE AS IN FIGURE A. -PLACE RANGE MARKER DECALS ON SCREEN OF MONITOR OVER IMAGE OF INDICATOR MARKERS ON GROUND BEHIND VEHICLE, AS VIEWED ON THE MONITOR SCREEN. -THIS GIVES YOU A VISUAL REFERENCE OF ACTUAL DISTANCE BEHIND VEHICLE, AS OBJECTS ARE VIEWED. INDICATOR MARKERS 1 FT 2 FT 5 FT WIDTH OF VEHICLE FIGURE A 5 2 1 STOP FIGURE B 9
Résumé du contenu de la page N° 10
JUNCTION BOX MOUNTING TEMPLATE ? PANAVISE MOUNT TEMPLATE (OPTIONAL ACCESSORY – SEE PAGE 8) 10 SIDE
Résumé du contenu de la page N° 11
TROUBLESHOOTING SYMPTOM CAUSE SOLUTION No power No +12V accessory, No Replace circuit fuse, monitor has protection ground, mis-wired/reversed device built-in/reset, check ground connection, verify power is being supplied Video/No audio Blue/white audio trigger wire Connect to +12V ACC or reverse light circuit, not powered, Volume adjust turn volume adjustment up down Monitor does not Blue standby wire not Connect to reverse circuit +12V activate in reverse powered Negative/dark Low v
Résumé du contenu de la page N° 12
PRODUCT SPECIFICATIONS LCD panel specifications: Size/Type 6.8” (diagonal) /TFT LCD Brightness 250 nit (min) 300 nit (typ.) Contrast Ratio 60 (min) 150 (typ.) View Angles Top (12 o ’clock): 25? (min) (@ CR? 10) Bottom (6 o ’clock): 40? (min) Horizontal: ? 55? (min) Response Time Rise: 25ms (typ.) ; 50ms (max) Fall: 30ms (typ.) ; 60ms (max) Back light Type CCFL Back light Life 30k hrs (min) ; 40k hrs (typ.) Operation Temperature Range: -20? C to 6
