Résumé du contenu de la page N° 1
SyncMaster 225MD
SyncMaster 225MD
Install Driver
Résumé du contenu de la page N° 2
SyncMaster 225MD Model Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for extended period of time, set your computer to DPM. If using a screen saver, set it to active screen mode. The images her
Résumé du contenu de la page N° 3
Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. (Class l Equipment only.) Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the plu
Résumé du contenu de la page N° 4
Installation Be sure to contact an authorized Service Center, when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Place your monitor in a location with low humidity and a minimum of dust. Failure to do so may cause electric shock or fire inside the monitor.
Résumé du contenu de la page N° 5
Any increase in the internal temperature may cause fire. Put down the monitor carefully. Failing to do so may damage the monitor. Do not place the monitor face down. This may damage the TFT-LCD surface. The installation of the bracket must be done by a qualified professional. Installing the bracket by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away
Résumé du contenu de la page N° 6
Clean When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric. Do not spray water or detergent directly onto the monitor. This may cause damage, electric shock or fire. Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth. A dirty connector may cause electric shock or fire. Make sure to unplug the power co
Résumé du contenu de la page N° 7
If your monitor does not operate normally - in particular, if there is any unusual sound or smell coming from the monitor - unplug it immediately and contact an authorized dealer or the Service Center. This may cause electric shock or fire. Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehicle. This may cause a malfunction, electric shock or fire. In particular, avoid operating the monitor near water or outdoors where the monitor c
Résumé du contenu de la page N° 8
Never insert anything metallic into the monitor openings. This may cause electric shock, fire or injury. Do not insert metal objects such as chopsticks, wire and tools or inflammable objects such as paper or matches into the vent, headphone port or AV ports or etc. This may cause electric shock or fire. If an alien substances or water enters the product, turn the product off, unplug the power connector from the wall outlet and contact the Service Center. When viewing a fixed s
Résumé du contenu de la page N° 9
Place the product out of children's reach, as they could damage by hanging onto it. A falling product may cause injury to the person or even fatality. When not using the product for an extended period of time, keep the product unplugged. Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, causing electric shock or fire. Do not place your children's favorite toys or any other objects of interest on the product. Children may try to clim
Résumé du contenu de la page N° 10
height so that the top of the monitor is slightly below eye level. Adjust the monitor angle so that there is no reflected light on the screen.Try to maintain your arms perpendicular to your armpits. Keep your arms level with the back of your hands. Keep the angle of the elbow perpendicular. Keep the angle of the knees at more than 90 degree. Do not let your feet fall up from the floor. Adjust the arm position so that it is below the heart.
Résumé du contenu de la page N° 11
SyncMaster 225MD Model Features Features of Digital Broadcasting - All multimedia broadcasting processes including program creation, transmission, and receiving are processed digitally, which allows users to enjoy a very high screen quality without any signal loss as well as benefit from various additional services. Viewing Digital Broadcasting - To watch digital broadcasting, you need a monitor which can receive digital broadcasts and fulfill the required co
Résumé du contenu de la page N° 12
Without Stand With Stand Manual Warranty Card Quick Setup Guide User's Guide, Monitor Driver (Not available in all locations) Cable D-Sub Cable Stereo Cable Power Cord Other Remote Control Batteries (AAA X 2) Cleaning Cloth Sold separately
Résumé du contenu de la page N° 13
TV Antenna Cable RCA Cable (Video-Yellow, Component(PR, PB, Y) Cable (Coaxial Cable) Audio-Red and White) S-VIDEO Cable Earphones/Headphones SCART Cable DVI Cable DVI to HDMI cable HDMI Cable Digital audio optical output RCA to stereo (for PC) cable cable This is an accessory that can be added depending on the model. Front 1. TV/DTV 2. PIP 3. ▼, ▲ 4. -, + 5. MENU 6. 7. Remote Control Sensor 8. [ ] Power button 9. Power indicator 10. Speaker
Résumé du contenu de la page N° 14
1. TV/DTV This button is used to switch between normal and DTV broadcasting signals. [TV] → [DTV] >>Click here to see an animation clip 2. PIP - Available in PC/DVI Mode In PC mode, turns on Video or TV screens in PIP mode. 3. ▼, ▲ Moves from one menu item to another vertically or adjusts selected menu values. In TV mode, selects TV channels. 4. -, + Moves from one menu item to another horizontally or adjusts selected menu values. Adjusts the audio volume. 5. MENU Use t
Résumé du contenu de la page N° 15
Rear (The configuration at the back of the monitor may vary from product to product.) 1. POWER Connect the power cord for your monitor to the POWER on the back of the monitor. This product may be used with 100 ~ 240VAC(+/- 10%). 2. DVI/PC IN / HDMI/PC/DVI-D AUDIO IN 1. PC : Connect the signal cable to the PC port on the back of your monitor. 2. DVI-D : Connect the DVI cable to the DVI-D port on the back of your monitor. 3. HDMI/PC/DVI-D AUDIO IN : Co
Résumé du contenu de la page N° 16
4. ANT IN Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side of the monitor. Make sure to use a TV antenna cable (sold separately) as the antenna cable. 5. HDMI IN / DIGITAL AUDIO OUT(OPTICAL) 1. HDMI IN : Connect the HDMI IN terminal at the back of your monitor to the HDMI terminal of your digital output device using a HDMI cable. 2. DIGITAL AUDIO OUT(OPTICAL) : Connect the [DIGITAL AUDIO OUT(OPTICAL)] terminal of your monitor to t
Résumé du contenu de la page N° 17
8. The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.) For using a locking device, contact where you purchase it. 9. COMMON INTERFACE This contains information on CAM inserted in the CI slot and displays it. The Application Info inserting is about the CI CARD. You can install the CAM anytime whether the TV is ON or OFF. 10. S-VIDEO / VIDEO / R - AUDIO - L
Résumé du contenu de la page N° 18
Remote Control The performance of the remote control may be affected by a TV or other electronic device operated near the monitor, causing malfunction due to interference with frequency. 1. POWER 2. Number button 3. -/-- 4. TV/DTV 5. CH LIST 6. 7. MENU 8. MUTE 9. Up-Down Left-Right buttons 10. ENTER 11. RETURN 12. SOURCE 13. PRE-CH 14. GUIDE 15. D.MENU 16. P 17. EXIT 18. INFO 19. TTX/MIX 20. COLOR BUTTONS 21. P.MODE, M/B (MagicBright™) 22. S.MODE 23. AUTO 24.
Résumé du contenu de la page N° 19
5. CH LIST It display "Channel List" on the screen. 6. Adjusts the audio volume. 7. MENU Opens the on-screen menu and exits from the menu or closes the adjustment menu. 8. MUTE Press to mute the sound temporarily. Displayed on the bottom left of the screen. Press the MUTE button again to cancel the Mute function. Alternatively press the buttons to cancel the Mute function. 9. Up-Down Left-Right buttons Moves from one menu item to another horizontally, vertically or ad
Résumé du contenu de la page N° 20
Then press the button again to circle through available preconfigured modes. ( Dynamic → Standard → Movie → Custom ) PC / DVI Mode : M/B ( MagicBright™ ) MagicBright™ is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Then press the button again to circle through available preconfigured modes. ( Entertain → Internet → Text → Custom ) 22. S.MODE When you press this button, current mode is displayed on the lower cen
