Résumé du contenu de la page N° 1
COLOR MONITOR
SMC-212FP/SMC-210FP
SMC-152FP/SMC-150FP
SMC-212FN/SMC-210FN
SMC-152FN/SMC-150FN
User Guide
Mode d’emploi
Bedienungsanleitung
Manuale dell'utente
Guía del usuario
Résumé du contenu de la page N° 2
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the pol
Résumé du contenu de la page N° 3
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Graphic Symbol Explanation The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to pers
Résumé du contenu de la page N° 4
IMPORTANT SAFEGUARDS Caution Power source is indicated on the rear of the set. It contains high-voltage parts. If you remove the cover, it may cause fire or electric shock. Do not remove the cover by yourself. (Control switches are at the front of the monitor.) 1. Read Instructions : All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions : The safety and operating instructions should be retained for future reference. 3. Heed Warnings :
Résumé du contenu de la page N° 5
8. Accessories : Do not place this monitor on an unstable cart, stand, tripod, bracket or table. The monitor may fall, causing serious injury to a child or adult and serious damage to the appliance. Use only with a cart, stand, tripod. bracket or table recommended by Samsung or sold with the monitor. Any mounting of the monitor should follow Samsung’s instructions and should use a mounting accessory recommended by Samsung. 9. Ventilation : Slots and openings in the cabinet are provided for venti
Résumé du contenu de la page N° 6
13. Lightning : For added protection for this monitor during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the monitor due to lightning and power-line surges. 14. Overloading : Do not overload wall outlets and extension cords as this can result in a risk of fire of electric shock. 15. Object and liquid Entry : Never push objects of any kind into this monitor through
Résumé du contenu de la page N° 7
18. Replacement Parts : When replacement parts are required, be sure the service technician has used replacement parts specified by Samsung or have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock or other hazards. 19. Safety Check : Upon completion of any service or repairs to this monitor, ask the service technician to preform safety checks to determine that the monitor is in proper operating condition. FCC information Warning This
Résumé du contenu de la page N° 8
Contents IMPORTANT SAFETY INSTRUCTIONS .................Eng-2 IMPORTANT SAFEGUARDS................................... Eng-4 FCC information .......................................................... Eng-7 Front Panel Components and Controls ........................ Eng-9 • Using the Auto Mode ..........................................Eng-11 • Using the Auto-Skip Mode..................................Eng-12 • Using the Manual Mode ......................................Eng-13 • Using the MENU butt
Résumé du contenu de la page N° 9
Front Panel Components and Controls SMC-212F SMC-152F POWER On/Off Switch If you press this switch, the monitor is turned on and the LED of selected input signal is lit. Auto/Manual/VCR Mode Selection Button If the Auto/Manual/VCR mode selection button is pressed, a RED indicator light will be displayed for Auto mode, a GREEN indicator light for Manual mode and an ORANGE indicator light for VCR Mode. Eng-9
Résumé du contenu de la page N° 10
SMC-210F SMC-150F POWER On/Off Switch If you press this switch, the monitor is turned on and the LED of selected input signal is lit. VIDEO A/VIDEO B/VCR Mode Selection Button If the VIDEO A/VIDEO B/VCR mode selection button is pressed, a RED indicator light will be displayed for VIDEO A mode, a GREEN indicator light for VIDEO B mode and an ORANGE indicator light for VCR Mode. Eng-10
Résumé du contenu de la page N° 11
Using the Auto Mode The RED indicator light is lit when Auto Mode is selected. In the Auto mode, the camera and VCR input channels will automatically switch by following sequence: Camera 1 → Camera 2 → Camera 3 → Camera 4 → VCR, where the switching interval is set in the MENU option. (In the MENU option, auto-timer, 2 to 10 seconds) Camera 1 Camera 2 Camera 3 ... (After auto-timer duration) (After auto-timer duration) Eng-11
Résumé du contenu de la page N° 12
Using the Auto-Skip Mode When the Auto-skip options is set in the MENU settings, and no input signals are found for the channels 2, 4 and VCR, the Monitor will operate as follows: Camera 1 Scanning Camera 2 Scanning Camera 3 Scanning Camera 4 Scanning VCR Scanning No Input Signal No Input Signal No Input Signal After 1 second After 1 second After 1 second After 1 second (After scanning 5 channels) Camera 1 Scanning Camera 2 Scanning Camera 3 Scanning Camera 4 Scanning VCR Sc
Résumé du contenu de la page N° 13
Using the Manual Mode The GREEN indicator light is lit when Manual Mode is selected. This option allows the user to manually select either Camera OR VCR input channel accordingly as follows: CAMERA 1 Button If this button is pressed, the menu setting will be set to Camera 1. CAMERA 2 Button If this button is pressed, the menu setting will be set to Camera 2. CAMERA 3 Button If this button is pressed, the menu setting will be set to Camera 3. CAMERA 4 Button If this button is pressed, the menu se
Résumé du contenu de la page N° 14
Using the MENU button Press the MENU button for MENU settings. MENU Button - VOLUME If the MENU Button is pressed, all user controllable menus will be displayed in the following sequence: Contrast ➔ Brightness ➔ Sharpness ➔ Color ➔ Tint(NTSC) ➔ Auto Timer ➔ Auto Skip ➔ Camera OSD ➔ Language ➔ Preset To set each Menu setting 1. Press MENU button to select Menu to set 2. Use VOLUME Button to set Menu setting 3. After setting each MENU option, return to the MAIN MENU for other menu options. (Pres
Résumé du contenu de la page N° 15
Settings Range of Each Button MENU Settings Range Explanation Contrast 0~100 To select a specific Contrast within the setting range. Brightness 0~100 To select a specific Brightness within the setting range. Sharpness 0~100 To select a specific Sharpness within the setting range. Color 0~100 To select a specific Color within the setting range. Tint (NTSC) Red 0~100 To select specific Tint within the setting range. Green 0~100 Auto Timer 2 ~ 10 seconds Interval of Input Channel Switching for Auto
Résumé du contenu de la page N° 16
Use the VOLUME Button to adjust Auto-Skip menu setting. • Select the Auto-Skip Menu in the MENU options. • Press the VOLUME Button to turn on and off the Auto-Skip setting. Use the VOLUME Button to adjust the preset MENU settings. • Select the Preset Menu in the MENU options. • Press the VOLUME Button to adjust default setting values of the PRESET settings. Default values of the PRESET settings are: Preset Default setting Contrast 60 Brightness 50 Sharpness 50 Color 50 Tint (NTSC) Green
Résumé du contenu de la page N° 17
Exit MENU • The Menu mode will exit automatically after 20 seconds of no user input. Adjusting VOLUME • In the MANUAL Mode, use the VOLUME button to adjust the volume of the selected channel. • Press the VOLUME button to decrease, or press the VOLUME button to increase the volume. • Monitor displays the volume as an adjustable signal bar. • The volume setting will remain unchanged if no adjustment is made within 3 seconds. Eng-17
Résumé du contenu de la page N° 18
Rear Panel Components and Controls SMC-150F/SMC-210F SMC-152F/SMC-212F CAMERA IN (1~4) Camera INPUT connector. Input connectors for up to 4 cameras MONITOR OUT Monitor OUTPUT connector. VCR IN VCR INPUT connector. Connect to the VCR. AUDIO IN (1~4) AUDIO INPUT connector. Select corresponding AUDIO input signals (1 – 4) AUDIO OUT AUDIO OUTPUT connector. (Not working under AUTO Mode) AUDIO IN (VCR) VCR AUDIO INPUT connector. Eng-18
Résumé du contenu de la page N° 19
Connections CCD Camera 1 CCD Camera 2 CCD Camera 3 CCD Camera 4 TimeLaps VCR TimeLaps VCR Eng-19
Résumé du contenu de la page N° 20
Maintenance If the quality of the picture on the COLOR MONITOR is poor and cannot be improved, inspect all system connections and cable runs. Repairs should be performed by a qualified technician with adequate test equipment and facilities. Eng-20
