Résumé du contenu de la page N° 1
Elo Entuitive Touchmonitor
User Guide
19" LCD Desktop Touchmonitor
1925L Series
Revision A
P/N 008585
Elo TouchSystems, Inc.
1-800-ELOTOUCH
www.elotouch.com
Résumé du contenu de la page N° 2
Copyright © 2004 Elo TouchSystems Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo TouchSystems. Disclaimer The information in this document is subject to change without notice. Elo TouchSystems makes no
Résumé du contenu de la page N° 3
iv
Résumé du contenu de la page N° 4
Table of Contents OSD Menu Function . . . . . . . . . . . . . . 25 Chapter 1 Introduction 1 Chapter 4 Precautions . . . . . . . . . . . . . . . . . . . . 1 Troubleshooting 27 About the Product . . . . . . . . . . . . . . . . . 1 Solutions to Common Problems . . . . . . . . 27 Chapter 2 Appendix A Installation and Setup 3 Native Resolution 29 Unpacking Your Touchmonitor. . . . . . . . . . . 3 Product Overview . . . . . . .
Résumé du contenu de la page N° 5
vi
Résumé du contenu de la page N° 6
C HAPTER C HAPT E R 1INTRODUCTION Congratulations on your purchase of an Elo TouchSystems Entuitive touchmonitor. Your new touchmonitor combines the reliable performance of Elo’s touch technology with the latest advances in LCD display design. This combination of features creates a natural flow of information between a user and your touchmonitor. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit. See Appendix
Résumé du contenu de la page N° 7
Auto adjustment capability High quality full screen re-scaling Multilingual OSD menus in 11 languages: English, French, German, Spanish, Italian, Swedish, Finnish, Danish, Portuguese, Dutch and Japanese Serial or USB touch interface (USB requires Windows 98, 2000, Me and XP.) Built in speakers with volume control thorough OSD Patented touch technology of Elo TouchSystems VESA DDC 1/2B data communication VESA DPMS power saving Stand with minimum 95° angle of tilt. Cable mana
Résumé du contenu de la page N° 8
C HAPTER C HAPT E R 2INSTALLATION AND SETUP This chapter discusses how to install your LCD touchmonitor and how to install Elo TouchSystems driver software. Unpacking Your Touchmonitor Check that the following 10 items are present and in good condition: OR USB touchscreen cable Serial cable LCD Display Quick Install Guide DVI-D video CD Analog video cable Software cable S-video cable RCA cable User Guide-on CD, European monitor power cable Quick Install Guide and software CD Monitor power ca
Résumé du contenu de la page N° 9
Product Overview Main Unit LCD Display Stand Rear View Bottom cut-out 2-4 Elo Entuitive Touchmonitor User Guide
Résumé du contenu de la page N° 10
Side View Menu User Controls Select Base Bottom View 72.2 100.0 69.2 100.0 2-5
Résumé du contenu de la page N° 11
Touch Interface Connection NOTE: Your interface cables may have been pre-connected to your monitor at the factory. Your touchmonitor comes with one of the following touchscreen connector cables: Serial (RS-232) cable or USB cable. (For Windows 98, 2000, Me and XP systems only.) To set up this display, please refer to the following figures and procedures: Serial/USB Connection The following illustrations guide you step by step in connecting your touchmonitor using a serial or USB cable connec
Résumé du contenu de la page N° 12
Serial Option Audio In, RCA Jack Video In, RCA Jack S-Video DVI-I, including Analog Audio In, PC Sound Card Touch LED Status DC Power Serial Touchscreen AC Power Connector Power LED status USB Option USB In and Touch Screen Connector USB Out Figure 2.2 Touchmonitor Connections (Serial and USB) The following table indicates the LED status options for the Touch LED. LED Status On LED Status Off LED Status Blinking Contact Elo Support Contact Elo Support OK NOTE: Touch LED is currently only availab
Résumé du contenu de la page N° 13
Step 1-Routing the Cables The cables are routed through the cable management channel in the stand. 2-8 Elo Entuitive Touchmonitor User Guide
Résumé du contenu de la page N° 14
Step 2-Connecting the Video Cables video port video cable Connections on underside RCA S-Video Female 15-pin video connector Tilt the screen up and back to access the connection ports. Connect the 15-pin video cable (the ferrite bead end), the 24-pin DVI-D cable, the RCA or the S-Video cable to the video port on your PC. Connect the other end of the video cable to the video connector on your touchmonitor by routing the cable through the hole in the stand. Secure the cable to your to
Résumé du contenu de la page N° 15
Step 3-Connecting the Serial or USB Touchscreen Cable Serial touchscreen cable Connections on underside Serial touchscreen connector USB Out USB In and Touchscreen Connector Connect the female end of the serial (RS-232) cable to the serial port on the back of your PC, or connect the USB touchscreen cable to the USB touchscreen connector on the back of your touchmonitor. Connect the male end of the cable to the serial touchscreen connector on your touchmonitor, or connect the other end of
Résumé du contenu de la page N° 16
Step 4-Connecting the Speaker Cable Connections on underside Speaker port Speaker cable NOTE: If you do not wish to connect the speaker cable, go to step 5. To use the built in speakers, you need to connect the speaker cable. Connect the speaker cable to the speaker port inside the back of your touchmonitor. Connect the other end of the cable to the speaker connector on your PC. Step 5-Connecting the Power Cable Connections on underside IEC60320-1 connector 6mm coaxial connector DC power A
Résumé du contenu de la page N° 17
Tilt Lock Function You are able to lock the monitor in a desired position. Pivot the monitor to the desired position. Rotate the knob one full turn clockwise to lock the monitor in position. Rotate the knob one full turn counter-clockwise to unlock the monitor from its position. 54 Figure 2.3 Tilt Lock Function Optimizing the LCD Display To ensure the LCD display works well with your computer, configure the display mode of your graphic card to make it less than or equal to 1280 x 1024 r
Résumé du contenu de la page N° 18
VESA Mount on Your Touchmonitor Your touchmonitor conforms to the VESA Flat Panel Monitor Physical Mounting Interface (FPMPMI™) Standard which defines a physical mounting interface for flat panel monitors, and corresponding standards for flat panel monitor mounting devices, such as wall and table arms. The VESA mounting interface is located on the back of your touchmonitor and is shipped pre-connected to the base. Remove these four screws (retain for reassembly) VESA mounting sufrace is lo
Résumé du contenu de la page N° 19
Rear Mount Template 100 Cable access cutout 100 30 15 150 Front Mount Template 100 100 Cable Access Cutout 40 30 150 Remove the two screws holding the front cover to the stand (see Figure 3). Route the cables through the cutout (if applicable) and mount the monitor to a horizontal surface using the template on page 2-16. Reassemble the front cover. 2-14 Elo Entuitive Touchmonitor User Guide
Résumé du contenu de la page N° 20
Front Mount for Horizontal Surface Front Cover Attachment Screws M5 Screw (4X) M5 Washer (4X) Access Cutout M5 Nut (4X) The following companies provide VESA mounting devices compatible with your touchmonitor: Ergotron Innovative Office Products 800-888-8458 800-524-2744 651-681-7600 610-253-9554 www.ergotron.com www.innov-office-prod.com GCX MRI 800-228-2555 800-688-2414 707-773-1100 www.mediarecovery.com www.gcx.com 2-15
