Instruction d'utilisation Acer AL2032

Résumé du contenu de la page N° 1

Installation Instructions for the Acer Monitor Drivers that
are not Digitally Signed


In the event that the driver you have downloaded from the Acer web site is not digitally signed, please
follow the steps below. Note: these instructions are for the AL2032 driver and will be similar for any
non-digitally signed driver.

1.Click mouse right button and chose "Properties"

Résumé du contenu de la page N° 2

2/3. In Display Properties, choose Settings first - you can see the monitor is detected as a Plug and Play Monitor. Click "Advanced" to go to next step. 4/5.Click "Monitor" and check the "Properties"

Résumé du contenu de la page N° 3

6/7. Click "Driver" then "Update Driver..."

Résumé du contenu de la page N° 4

8/9. Hardware Update Wizard will pop up and ask you if windows can connect to Windows Update to search for software. Choose "No, not at this time” then click "Next>" 10/11. Choose"Install from a list or specific location (Advanced)” and click “Next>”

Résumé du contenu de la page N° 5

12/13.Choose "Don't search. I will choose the driver to install" and click "Next>". 14/15.Choose"Have Disk...." and click "Next>"

Résumé du contenu de la page N° 6

16.Click "Browse..." to locate the files. 17/18. Link to folder "C:\AL2032W Driver" and find "07F0.inf", and Click "open".

Résumé du contenu de la page N° 7

19.Click "OK" to the next step. 20.You can see AL2032W driver found . Click "Next>"

Résumé du contenu de la page N° 8

21.During the installation , the system will warn you that this driver has not passed Windows Logo testing. Click "Continue Anyway" and it will start to install the driver files. 22. After the files are copied , the installation is finished . Click "Finish" to close the installation.

Résumé du contenu de la page N° 9

23. In Display Properties , you can see AL2032W is installed and 1680x1050 resolution is selected.