Résumé du contenu de la page N° 1
AT5IONT-I DELUXE
AT5IONT-I
Motherboard
Résumé du contenu de la page N° 2
E5277 First Edition V1 July 2010 Copyright © 2010 ASUSTeK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (“ASUS”). Product warranty or service will not be extended if:
Résumé du contenu de la page N° 3
Contents Notices .......................................................................................................... v Safety information ...................................................................................... vi About this guide ......................................................................................... vi AT5IONT-I Series specifications summary ............................................. viii Chapter 1: Product introduction 1.1 Before you proceed ........
Résumé du contenu de la page N° 4
Contents 2.2 BIOS setup program .................................................................... 2-4 2.3 Main menu .................................................................................... 2-4 2.3.1 System Time ................................................................... 2-5 2.3.2 System Date ................................................................... 2-5 2.3.3 SATA 1~2 ........................................................................ 2-5 2.3.4 Storage Config
Résumé du contenu de la page N° 5
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide r
Résumé du contenu de la page N° 6
Safety information Electrical safety • To prevent electric shock hazard, disconnect the power cable from the electric outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device. • Before connecting or removing signal cables from the motherboard, ensure that all power cabl
Résumé du contenu de la page N° 7
Conventions used in this guide To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to help you complete a task. Where to find more infor
Résumé du contenu de la page N° 8
AT5IONT-I Series specifications summary ® CPU Integrated Dual-Core Intel Atom™ D525 processor ® Chipset Intel NM10 Memory Single channel memory architecture - 2 x SO-DIMM sockets support maximum 4GB unbuffered non-ECC 800 MHz DDR3 memory modules * Refer to www.asus.com or this user manual for the Memory QVL (Qualified Vendors Lists). ** When you install a total memory of 4GB capacity or more, the operating system may only recognize less than 3GB. We recommend a maximum of 3GB syste
Résumé du contenu de la page N° 9
AT5IONT-I Series specifications summary Rear panel ports 1 x PS/2 Keyboard port 1 x PS/2 Mouse port 1 x Optical S/PDIF out port 1 x DVI-D port 1 x HDMI port 1 x eSATA port 1 x LAN (RJ-45) port 2 x USB 2.0/1.1 ports 2 x USB 3.0/2.0 ports 3 x Audio jacks 1 x DC port* 1 x WiFi antenna port* 1 x Bluetooth adapter* * For AT5IONT-I DELUXE only Internal connectors 1 x USB 2.0/1.1 connector supports additional 2 USB 2.0/1.1 ports 1 x CPU fan connector 1 x Chassis fan connector 1 x
Résumé du contenu de la page N° 10
Chapter 1 Product introduction ® Thank you for buying an ASUS AT5IONT-I Series motherboard! Before you start installing the motherboard, and hardware devices on it, check the items in your motherboard package. Refer to page ix for the list of accessories. • AT5IONT-I Series motherboards include AT5IONT-I and AT5IONT-I DELUXE two models. The package contents vary from models. • If any of the items is damaged or missing, contact your retailer. 1.1 Before you proceed Take note of the following
Résumé du contenu de la page N° 11
1.2 Motherboard overview 1.2.1 Motherboard layout ASUS AT5IONT-I Series motherboards include AT5IONT-I and AT5IONT-I DELUXE two models. The layout varies with models. The layout illustrations in this user guide are for AT5IONT-I DELUXE only. Ensure that you install the motherboard into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis. 1 2 3 17.1cm(6.75in) DC_PWR/ WiFi antenna KBMS 3 PS2_USBPW1-4 Place this side towards 4 the rear of
Résumé du contenu de la page N° 12
1.2.2 Layout contents Connectors/Jumpers/LED Page Connectors/Jumpers/LED Page Keyboard/mouse power and USB device 1. 1-7 8. Clear RTC RAM (3-pin CLRTC) 1-6 wake-up (3-pin PS2_USBPW1-4) 2. Atom D525 processor 1-3 9. Internal speaker connector (4-pin SPEAKER) 1-12 CPU, power, and chassis fan connectors (3-pin 3. 1-11 10. Serial ATA connectors (7-pin SATA1/2) 1-10 CPU_FAN, 3-pin PWR_FAN, 3-pin CHA_FAN) 4. DDR3 SO-DIMM slots 1-3 11. USB connector (10-1 pin USB56) 1-11 5. USB device wake-up (3-pin
Résumé du contenu de la page N° 13
1.4.2 Memory configurations You may install 512MB, 1GB, and 2GB unbuffered non-ECC DDR3 SO-DIMMs into the DIMM sockets. • Always install DIMMs with the same CAS latency. For optimum compatibility, it is recommended that you obtain memory modules from the same vendor. • Due to the CPU limitation, when you install 4GB or more memory on the motherboard, the actual usable memory for the OS can be about 3GB or less. For effective use of memory, we recommend that you do use a maximum of 3GB syste
Résumé du contenu de la page N° 14
1.5 Expansion slot In the future, you may need to install an expansion card. The following sub-sections describe the slot and the expansion cards that it supports. Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. 1.5.1 Installing an expansion card To install an expansion card: 1. Before installing the expansion card, read the documentation that came with it and make the necessary hardware setting
Résumé du contenu de la page N° 15
1.6 Jumpers 1. Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data. The onboard button cell battery powers the RAM data in CMOS, which include system setup information such as system passwords. CLRTC Normal Clear RTC AT5IONT-I DELUXE (Default) AT5IONT-I DELUXE Clear RTC RAM To erase the RTC RAM: 1. Turn OFF the computer and unplug the power c
Résumé du contenu de la page N° 16
(Default) (Default) 2. Keyboard/mouse power and USB device wake-up (3-pin PS2_USBPW1-4) This jumper allows you to enable or disable the keyboard/mouse and USB port 1-4 wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up the computer by pressing a key on the keyboard, clicking the mouse or using a USB device. This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. The USBPW1-4 jumper is for t
Résumé du contenu de la page N° 17
1.7 Connectors 1.7.1 Rear panel connectors 1 2 3 4 5 6 7 15 14 13 12 11 10 9 8 1. WLAN antenna port (for AT5IONT-I DELUXE only). This port connects to the WLAN antenna. 2. PS/2 Mouse port (green). This port is for a PS/2 mouse. 3. Optical S/PDIF Out port. This port connects to an external audio output device via an optical S/PDIF cable. 4. Onboard Bluetooth module (for AT5IONT-I DELUXE only). This onboard Bluetooth module allows wireless connection and data transfer between your system and o
Résumé du contenu de la page N° 18
6. Line In port (light blue). This port connects to the tape, CD, DVD player, or other audio sources. 7. Line Out port (lime). This port connects to a headphone or a speaker. In the 4, 6, and 8-channel configurations, the function of this port becomes Front Speaker Out. 8. Microphone port (pink). This port connects to a microphone. Refer to the audio configuration table below for the function of the audio ports in 2, 4, 6, or 8-channel configuration. Audio 2, 4, 6, or 8-channel configuration
Résumé du contenu de la page N° 19
1.7.2 Internal connectors 1. Serial ATA connectors (7-pin SATA1, SATA2) These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk drives and optical disk drives. The Serial ATA 3Gb/s is backward compatible with the Serial ATA 1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster than the standard parallel ATA (133 MB/s). SATA1 SATA2 AT5IONT-I DELUXE AT5IONT-I DELUXE SATA connectors ® • Install the Windows XP Service Pack 2 or later versions
Résumé du contenu de la page N° 20
3. USB connector (10-1 pin USB56) This connector is for a USB 2.0 port. Connect the USB module cable to this connector, then install the module to a slot opening at the back of the system chassis. This USB connector complys with USB 2.0 specification that supports up to 480 Mbps connection speed. USB56 AT5IONT-I DELUXE PIN 1 AT5IONT-I DELUXE USB2.0 connector Never connect a 1394 cable to the USB connector. Doing so will damage the motherboard! The USB module cable is purchased separately. 4.
