Résumé du contenu de la page N° 1
P4i65PE
User Manual
Version 1.1
Published May 2005
Copyright©2005 ASRock INC. All rights reserved.
1 1
1 1 1
Résumé du contenu de la page N° 2
Copyright Notice: Copyright Notice: Copyright Notice: Copyright Notice: Copyright Notice: No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be regis- tered trademarks or copyrights of their respective companies, and are used only for identif
Résumé du contenu de la page N° 3
Contents Contents Contents Contents Contents 1 Introduction 1 Introduction 1 Introduction 1 Introduction 1 Introduction ................................................... ................................................... ................................................... ................................................... ................................................... ... 5 ... 5 ... 5 ... 5 ... 5 1.1 Package Contents................................................................ 5 1
Résumé du contenu de la page N° 4
4 Software Support 4 Software Support 4 Software Support ........................................... ........................................... ........................................... 35 35 35 4 Software Support 4 Software Support ........................................... ........................................... 35 35 4.1 Install Operating System ............................................... 35 4.2 Support CD Information ................................................. 35 4.2.1
Résumé du contenu de la page N° 5
Chapter 1 Introduction Chapter 1 Introduction Chapter 1 Introduction Chapter 1 Introduction Chapter 1 Introduction Thank you for purchasing ASRock P4i65PE motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance. In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by- step guide to the hardware installation. C
Résumé du contenu de la page N° 6
1.2 Specifications 1.2 Specifications 1.2 Specifications 1.2 Specifications 1.2 Specifications Platform: ATX Form Factor: 12.0-in x 8.2-in, 30.5 cm x 20.8 cm ® ® ® CPU: Socket 478, supports Intel Pentium 4 / Celeron (Prescott, Northwood, Willamatte) processor Chipsets: North Bridge: ® Intel 865PE chipset, FSB @ 800 / 533 / 400MHz, supports Hyper-Threading Technology (see CAUTION 1) South Bridge: ® Intel ICH5, supports SATA 1.5Gb/s Memory: 4 DDR DIMM Slots: DDR1, DDR2, DDR3, and DDR4 4 DDR DIMM
Résumé du contenu de la page N° 7
Audio Jack: Side Speaker / Rear Speaker / Central/Bass / Line In / Front Speaker / Microphone (see CAUTION 7) BIOS: AMI legal BIOS, Supports “Plug and Play”, ACPI 1.1 compliance wake up events, Supports jumperfree, CPU frequency stepless control (only for advanced users’ reference, see CAUTION 8) ® ® OS: Microsoft Windows 98 SE / ME / 2000 / XP compliant CAUTION! 1. About the setting of “Hyper Threading Technology”, please check page 23. 2. Please check the table below for the memory support fr
Résumé du contenu de la page N° 8
Top: Top: REAR SPK LINE IN Center: Center: PARALLEL PORT SIDE SPK FRONT PS2 Bottom: Bottom: COM1 CTR BASS Keyboard MIC IN PGA478 1 1.3 Motherboard Layout 1.3 Motherboard Layout 1.3 Motherboard Layout 1.3 Motherboard Layout 1.3 Motherboard Layout 1 2 3 4 57 6 20.8cm (8.2 in) 1 PS2 PS2_USB_PWR1 Mouse CPU_FAN1 8 USB 2.0 T: USB2 B: USB3 USB 2.0 Top: T: USB0 RJ-45 B: USB1 Intel 29 865PE Chipset CD1 9 28 AGP 8X 27 1.5V_AGP1 PCI 10 LAN PCI 1 ` 11 2Mb 26 BIOS PCI 2 USB2.0 JR1 JL1 12 25 Intel 24 AUDIO1 P
Résumé du contenu de la page N° 9
1.4 1.4 1.4 ASRock 8CH I/O ASRock 8CH I/O ASRock 8CH I/O 1.4 1.4 ASRock 8CH I/O ASRock 8CH I/O 12 3 6 4 7 5 8 13 12 11 10 9 1 Parallel Port 8 Microphone (Pink) 2 RJ-45 Port 9 USB 2.0 Ports (USB01) 3 Rear Speaker (Gray) 10 USB 2.0 Ports (USB23) 4 Side Speaker (Black) 11 Serial Port: COM1 5 Central / Bass (Orange) 12 PS/2 Keyboard Port (Purple) 6 Line In (Light Blue) 13 PS/2 Mouse Port (Green) * 7 Front Speaker (Lime) * If you use 2-channel speaker, please connect the
Résumé du contenu de la page N° 10
Chapter 2 Installation Chapter 2 Installation Chapter 2 Installation Chapter 2 Installation Chapter 2 Installation P4i65PE is an ATX form factor (12.0-in x 8.2-in, 30.5 cm x 20.8 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to en- sure that the motherboard fits into it. Pre-installation Precautions Pre-installation Precautions Pre-installation Precautions Pre-installation Precautions Pre-installation Precautions Take note of the following precautio
Résumé du contenu de la page N° 11
2.1 CPU Installation 2.1 CPU Installation 2.1 CPU Installation 2.1 CPU Installation 2.1 CPU Installation Step 1. Unlock the socket by lifting the lever up to a 90° angle. Step 2. Position the CPU directly above the socket such that its marked corner matches the base of the socket lever. Step 3. Carefully insert the CPU into the socket until it fits in place. The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to avoid bending of the pins. Step 4. When the CPU
Résumé du contenu de la page N° 12
2.3 Installation of Memory Modules (DIMM) 2.3 Installation of Memory Modules (DIMM) 2.3 Installation of Memory Modules (DIMM) 2.3 Installation of Memory Modules (DIMM) 2.3 Installation of Memory Modules (DIMM) P4i65PE motherboard provides four 184-pin DDR (Double Data Rate) DIMM slots, and supports Dual Channel Memory Technology. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR DIMM pair in the slots of the same color. In other
Résumé du contenu de la page N° 13
Installing a DIMM Installing a DIMM Installing a DIMM Installing a DIMM Installing a DIMM Please make sure to disconnect power supply before adding or removing DIMMs or the system components. Step 1. Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. notch break notch break The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you for
Résumé du contenu de la page N° 14
2.4 Expansion Slots (PCI and AGP Slots) 2.4 Expansion Slots (PCI and AGP Slots) 2.4 Expansion Slots (PCI and AGP Slots) 2.4 Expansion Slots (PCI and AGP Slots) 2.4 Expansion Slots (PCI and AGP Slots) There are 5 PCI slots and 1 AGP slot on P4i65PE motherboard. PCI slots: The PCI slots are used to install expansion cards that have the 32-bit PCI interface. AGP slot: The AGP slot is used to install a graphics card. The AGP slot has a special locking mechanism which can securely fasten the graphics
Résumé du contenu de la page N° 15
2.5 Jumpers Setup 2.5 Jumpers Setup 2.5 Jumpers Setup 2.5 Jumpers Setup 2.5 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on pins, the jumper is “Short”. If no jumper cap is placed on pins, the jumper is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short” when jumper cap is placed on these 2 pins. Jumper Setting Description PS2_USB_PWR1 Short pin2, pin3 to enable 1_2 2_3 (see p.8 No. 1) +5VSB (standby) for PS/2 +5V +5VSB or U
Résumé du contenu de la page N° 16
2.6 Onboard Headers and Connectors 2.6 Onboard Headers and Connectors 2.6 Onboard Headers and Connectors 2.6 Onboard Headers and Connectors 2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! FDD connector (33-pin FLOPPY1) FLOPPY1 Pin1 (see p.8 No. 21) the red-striped side to Pin1 Note: Make sure the red-st
Résumé du contenu de la page N° 17
Serial ATA (SATA) Please connect the black end of Power Cable SATA power cable to the power connect to the (Optional) connect to the SATA HDD connector on the drive. Then power supply power connector connect the white end of SATA power cable to the power connector of the power supply. USB 2.0 Header ASRock 8CH I/O provides you USB_PWR P-6 (9-pin USB67) P+6 4 ready-to-use USB 2.0 ports on GND DUMMY (see p.8, No. 19) the rear panel. If the rear USB 1 ports are not sufficient, this GND USB 2.
Résumé du contenu de la page N° 18
PLED+ System Panel Header This header accommodates PLED- PWRBTN# (9-pin PANEL1) several system front panel GND (see p.8 No. 16) functions. 1 DUMMY RESET# GND HDLED- HDLED+ Chassis Speaker Header Please connect the chassis 1 SPEAKER (4-pin SPEAKER 1) speaker to this header. DUMMY DUMMY (see p.8 No. 17) +5V Chassis Fan Connector Please connect a chassis fan (3-pin CHA_FAN1) GND cable to this connector and +12V CHA_FAN_SPEED (see p.8 No. 14) match the black wire to the ground pin. CPU Fan Connec
Résumé du contenu de la page N° 19
2.7 2.7 2.7 Serial A Serial A Serial AT T TA (SA A (SA A (SAT T TA) Hard Disks Installation A) Hard Disks Installation A) Hard Disks Installation 2.7 2.7 Serial A Serial AT TA (SA A (SAT TA) Hard Disks Installation A) Hard Disks Installation This motherboard adopts Intel ICH5 south bridge chipset that supports Serial ATA (SATA) hard disks. You may install SATA hard disks on this motherboard for internal storage devices. This section will guide you to install the SATA hard disks. STEP 1: Install
Résumé du contenu de la page N° 20
Chapter 3 BIOS SETUP UTILITY Chapter 3 BIOS SETUP UTILITY Chapter 3 BIOS SETUP UTILITY Chapter 3 BIOS SETUP UTILITY Chapter 3 BIOS SETUP UTILITY 3.1 3.1 3.1 3.1 3.1 Introduction Introduction Introduction Introduction Introduction This section explains how to use the BIOS SETUP UTILITY to configure your system. The BIOS FWH chip on the motherboard stores the BIOS SETUP UTILITY. You may run the BIOS SETUP UTILITY when you start up the computer. Please press during the Power-On-Self-Test (POST
