Résumé du contenu de la page N° 1
ADSP-21535 EZ-KIT LITE
Evaluation System Manual
Second Edition, May 2002
Part Number
82-000603-01
Analog Devices, Inc.
Digital Signal Processing Division
One Technology Way
a
Norwood, MA 02062-9106
Résumé du contenu de la page N° 2
Limited Warranty The EZ-KIT Lite evaluation system is warranted against defects in materials and workmanship for a period of one year from the date of purchase from Analog Devices or from an authorized dealer. Disclaimer Analog Devices, Inc. reserves the right to change this product without prior notice. Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use; nor for any infringement of patent
Résumé du contenu de la page N° 3
Regulatory Compliance The ADSP-21535 EZ-KIT Lite evaluation system has been certified to comply with the essential requirements of the European EMC directive 89/336/EEC (inclusive 93/68/EEC) and therefore carries the CE mark. The ADSP-21535 EZ-KIT Lite evaluation system had been appended to the Technical Construction File referenced DSPTOOLS1 dated December 21, 1997 and was awarded CE Certification by an appointed European Competent Body as listed below. Technical Certificate No: Z60
Résumé du contenu de la page N° 4
TABLE OF CONTENTS LIST OF TABLES............................................................................................................. vi LIST OF FIGURES ........................................................................................................... vi 1 INTRODUCTION.................................................................................................. 1-1 1.1 For More Information About Analog Devices Products................................. 1-2 1.2 For Tech
Résumé du contenu de la page N° 5
4.4.1 Programmable Flag LEDs (LED1, LED2, LED3, LED4) .......................4-9 4.4.2 USB Monitor LED (LED5) ......................................................................4-9 4.4.3 Power LED (LED6)..................................................................................4-9 4.4.4 Reset LEDs (LED7, LED8)...................................................................... 4-9 4.4.5 Non-Maskable Interrupt Push Button (SW3) ........................................... 4-9 4.4.
Résumé du contenu de la page N° 6
LIST OF TABLES Table 1-1: Related DSP Documents ................................................................................ 1-5 Table 1-2: Related VisualDSP++ Documents ................................................................. 1-5 Table 2-1: Minimum PC Configuration........................................................................... 2-2 Table 3-1: EZ-KIT Lite Evaluation Board Memory Map ............................................... 3-2 Table 3-2: SDRAM Default Settings
Résumé du contenu de la page N° 7
1 INTRODUCTION Thank you for purchasing the ADSP-21535 EZ-KIT Lite evaluation system. The evaluation board is designed to be used in conjunction with the VisualDSP++ development environment to test the capabilities of the ADSP- 21535 digital signal processor (DSP). The VisualDSP++ development environment gives you the ability to perform advanced application code development and debug such as: • Create, compile, assemble, and link application programs written in C++, C and ADSP-2153x a
Résumé du contenu de la page N° 8
• Analog Devices AD1885 48 kHz AC97 SoundMAX Codec o Jumper-Selectable Line-In or Mic-In 3.5 mm Stereo Jack o Line-Out 3.5 mm Stereo Jack • SDRAM o 4 M x 32-bit • Flash Memory o 272 K x 16 • Interface Connectors o 14-Pin Emulator Connector for JTAG Interface o SPORT0 Connector TM o FlashLINK Connector (for flash programming) o Expansion Interface Connectors (not populated) • General-Purpose I/O o 4 Push Buttons connected to DSP Programmable Flags o 1 Push Button connected to
Résumé du contenu de la page N° 9
You may also obtain additional information about Analog Devices and its products in any of the following ways: • FAX questions or requests for information to (781) 461-3010. • Access the Computer Products Division File Transfer Protocol (FTP) site at 137.71.23.21 or ftp://ftp.analog.com. 1.2 For Technical or Customer Support You can reach our Customer Support group in the following ways: • Contact your local Analog Devices sales office or an authorized Analog Devices distributor. • Ca
Résumé du contenu de la page N° 10
DSP programmers who are unfamiliar with Analog Devices Blackfin DSPs can use this manual in conjunction with the ADSP-21535 DSP Hardware Reference and the ADSP-21535 DSP Instruction Set, which describe the DSP architecture and instruction set. DSP programmers who are unfamiliar with VisualDSP++ should refer to the VisualDSP++ Help menu and the VisualDSP++ Users Guide. For the locations of these documents, refer to section 1.6. 1.5 Manual Contents This manual contains the following info
Résumé du contenu de la page N° 11
To view help on additional ADSP-21535 EZ-KIT Lite features, go to the windows task bar and select Start\Programs\VisualDSP\EZ-KIT Help. The documents in the following tables can be found through online Help or in the Docs folder of your VisualDSP++ installation. For more documentation, please go to http://www.analog.com/technology/dsp/library.html. Table 1-1: Related DSP Documents Document Name Description ADSP-21535 DSP Datasheet General functional description, pinout, and timing. ADS
Résumé du contenu de la page N° 12
2 GETTING STARTED 2.1 Overview This chapter provides the information you need to begin using ADSP-21535 EZ-KIT Lite evaluation system. For correct operation install the software and hardware in the order presented in section 2.4. This chapter has the following sections: • Contents of your EZ-KIT Lite Package (Section 2.2) Provides a list of the components that are shipped with this EZ- KIT Lite evaluation system. • PC Configuration (Section 2.3) Describes the minimum requirements for
Résumé du contenu de la page N° 13
The EZ-KIT Lite evaluation system contains ESD (electrostatic discharge) sensitive devices. Electrostatic charges readily accumulate on the human body and equipment and can discharge without detection. Permanent damage may occur on devices subjected to high-energy discharges. Proper ESD precautions are recommended to avoid performance degradation or loss of functionality. Store unused EZ-KIT Lite boards in the protective shipping package. 2.3 PC Configuration For correct opera
Résumé du contenu de la page N° 14
2.4.1 Installing the VisualDSP++ Software This EZ-KIT Lite comes with the latest version of VisualDSP++ for the Blackfin DSP family. You must install this software before installing the EZ-KIT Lite debug software. Insert the VisualDSP++ CD-ROM into the CD-ROM drive. If Auto Run is enabled on your PC, the home screen of the VisualDSP++ install wizard will automatically appear. If not, choose Run from the Start menu, and enter D:\Setup.exe in the Open field, where D is the name of your l
Résumé du contenu de la page N° 15
2.4.4 Setting Up the EZ-KIT Lite Hardware The EZ-KIT Lite evaluation system contains ESD (electrostatic discharge) sensitive devices. Electrostatic charges readily accumulate on the human body and equipment and can discharge without detection. Permanent damage may occur on devices subjected to high-energy discharges. Proper ESD precautions are recommended to avoid performance degradation or loss of functionality. Store unused EZ-KIT Lite boards in the protective shipping package
Résumé du contenu de la page N° 16
3. Plug the provided power supply into P10 on the EZ-KIT Lite board. Visually verify that the green power LED (LED6) is on. Also verify that the two red reset LEDs (LED7 and LED8) go on for a moment and then go off. 4. Connect the USB cable to an available full speed USB Port and to P7 on the ADSP-21535 EZ-KIT Lite board. 2.4.5 Installing the EZ-KIT Lite USB Driver The EZ-KIT Lite evaluation system can be installed on Windows 98 and Windows 2000 and requires one full-speed USB port. S
Résumé du contenu de la page N° 17
2. Click Next. 3. Select Search for the best driver for your device as shown in Figure 2-3. Figure 2-3: Search for the driver 4. Click Next. 5. Select CD-ROM drive as shown in Figure 2-4. Figure 2-4: Search the CD-ROM 6. Click Next. 2-6 ADSP-21535 EZ-KIT Lite Evaluation System Manual
Résumé du contenu de la page N° 18
Windows 98 will locate the WmUSBEz.inf file that is on the CD-ROM as shown in Figure 2-5. Figure 2-5: The driver is located 7. Click Next. The Coping Files dialog box appears (Figure 2-6). Figure 2-6: Search for .sys File Dialog Box 8. Click Browse. 2-7 ADSP-21535 EZ-KIT Lite Evaluation System Manual
Résumé du contenu de la page N° 19
Figure 2-7 will appear. Figure 2-7: Open the .sys File 9. In Drives select your CD-ROM drive. 10. Click OK. Figure 2-8 will appear. Figure 2-8: Copying Files 11. Click OK. 2-8 ADSP-21535 EZ-KIT Lite Evaluation System Manual
Résumé du contenu de la page N° 20
The driver installation is now complete as shown in Figure 2-9. Figure 2-9: Finish the Software Installation 12. Click Finish to exit the wizard. Verify the installation by following the instructions in section 2.4.6. 2-9 ADSP-21535 EZ-KIT Lite Evaluation System Manual
