Résumé du contenu de la page N° 1
Tempest i5100X S5375
///
Version 1.1
Copyright
Copyright © TYAN Computer Corporation, 2007. All rights reserved. No part of this
manual may be reproduced or translated without prior written consent from TYAN
Computer Corp.
Trademark
All registered and unregistered trademarks and company names contained in this
manual are property of their respective owners including, but not limited to the
following.
TYAN, Tempest i5100X are trademarks of TYAN Computer Corporation.
Résumé du contenu de la page N° 2
Table of Contents Check the box contents! 3 Chapter 1: Introduction 1.1 Congratulations 5 1.2 Hardware Specifications 5 Chapter 2: Board Installation 2.1 Board Image 8 2.2 Block Diagram 10 2.3 Board Parts, Jumpers and Connectors 12 2.4 Tips on Installing Motherboard in Chassis 20 2.5 Installing the Processor(s) 21 2.6 Installing the Memory 24 2.7 Attaching Drive Cables 26 2.8 Installing Add-in Cards 27 2.9 Installing Optional SO-DIMM Modules 28 2.10 Connecting External Devices 29
Résumé du contenu de la page N° 3
Check the box contents! 1x S5375 motherboard 3 x Serial ATA power cable 6 x Serial ATA Cable 2 x USB2.0 cable 1x Serial Port Cable 1 x S5375 user’s manual 1 x S5375 Quick Reference guide 1 x TYAN driver CD 1 x I/O shield 2 x CPU Back Plane If any of these items are missing, please contact your vendor/dealer for replacement before continuing with the installation process. 3
Résumé du contenu de la page N° 4
NOTE 4
Résumé du contenu de la page N° 5
Chapter 1: Introduction 1.1 - Congratulations You have purchased one of the most powerful server solutions. The Tempest ® ® i5100X (S5375) is a flexible Intel platform for multiple applications, based on Intel 5100 MCH and ICH9R chipsets. ® Designed to support two Intel 5100/5200/5400 Series processors and 32GB DDR2-533/667 DIMM memory, and featured with integrated Dual 82573V LAN controllers, built-in 32MB XGI Z9S video plus six SATA2 ports, the S5375 offers exceptional performan
Résumé du contenu de la page N° 6
Expansion Slots Integrated Audio *S5375AG2NR (S5375AG2NR only) • One (1) PCI-E x16 slot w/ x16 •HD Audio (High-Definition Audio) signal supported • One (1) PCI-E x8 slot w/ x8 signal •Realtek ALC262 (High-Definition Audio) controller • Two (2) PCI-X 1.0 64/133 slots •Front panel audio header (2x5 pin) • Two (2) 32/33 PCI 2.2 slots (PCI device component height •CD_IN, AUX headers (4-pin limit = 9.2mm) configuration) • Total six slots Integrated Video Controller *S5375G2NR-1U
Résumé du contenu de la page N° 7
Chapter 2: Board Installation You are now ready to install your motherboard. The mounting hole pattern of the Tempest i5100X S5375 matches the SSI CEB specification. Before continuing with installation, confirm that your chassis supports an SSI CEB motherboard. How to install our products right… the first time The first thing you should do is reading this user’s manual. It contains important information that will make configuration and setup much easier. Here are some precautions
Résumé du contenu de la page N° 8
2.1- Board Image Tempest i5100X S5375AG2NR This picture is representative of the latest board revision available at the time of publishing. The board you receive may or may not look exactly like the above picture. 8
Résumé du contenu de la page N° 9
Tempest i5100X S5375G2NR-1U This picture is representative of the latest board revision available at the time of publishing. The board you receive may or may not look exactly like the above picture. 9
Résumé du contenu de la page N° 10
2.2 - Block Diagram Tempest i5100X S5375AG2NR Block Diagram 10
Résumé du contenu de la page N° 11
Tempest i5100X S5375G2NR-1U Block Diagram 11
Résumé du contenu de la page N° 12
2.3 - Board Parts, Jumpers and Connectors This diagram is representative of the latest board revision available at the time of publishing. The board you receive may not look exactly like the above diagram. Jumper Legend OPEN - Jumper OFF, without jumper cover CLOSED – Jumper ON, with jumper cover 12
Résumé du contenu de la page N° 13
Jumper/Connector Function J2 CD_IN Connector J4 Front Panel Audio Connector J5 AUX_IN Connector J6 IPMB Connector J7 SO-DIMM Socket J10 Chassis Intrusion Connector J11 Fan Board Header for Barebone J12 TYFP2 Connector for Barebone J14 / J15 USB Front Panel Connector J16 Front Panel Header USB1 USB Rear Connector COM2 COM2 Header SATA0~SATA5 Serial ATA Connector PW1 24-pin Power Connector (EPS12V) PW2 8-pin Power Connector (EPS12V) PW3 Aux. Power Header for TYAN Riser Card (M2061)
Résumé du contenu de la page N° 14
SATA0 SATA1 SATA2 SATA3 SATA4 SATA5 J4 J5 J10 J2 J6 14
Résumé du contenu de la page N° 15
J2: CD_IN Connector (S5375AG2NR only) Pin Signal Pin Signal 1 4 1 R 2 GND 3 GND 4 L J4: Front Panel Audio Connector (S5375AG2NR only) PinSignal Pin Signal 2 10 1 MIC1_LN 2 GND 3 MIC1_RN 4 reserved 5 FRONT_RN 6 MIC_JD 7 SENSE 8 Key 1 9 9 FRONT_LN 10 LINE_JD J10: Chassis Intrusion Connector Use this header to connect with the front intruder button which indicates the warning message when the system 1 cover is opened. Pin Signal 1 In
Résumé du contenu de la page N° 16
J15 COM2 J11 J14 J12 16
Résumé du contenu de la page N° 17
COM2: COM2 Header Use these pin definitions to connect a port to COM2. *TYAN does not provide cable for this header. It is designed for barebone use only. 2 10 Pin Signal Pin Signal 1 DCD 2 DSR 3 RX 4 RTS 5 TX 6 CTS 1 9 7 DTR 8 RI 9 GND 10 NC J11: Fan Board Connector for Barebone It is designed for barebone use only. 13 1 PinSignal PinSignal 1 CPU0-TACH 2 SYS4-TACH 14 3 CPU1-TACH 4 SYS5-TACH 2 5 FAN3-TACH 6 SYS6-TACH
Résumé du contenu de la page N° 18
CPUFAN1 FAN1 CPUFAN2 FAN3 JP5 FAN2 JP1 JP3 J16 JP5: PCI-X Speed Select Jumper (S5375AG2NR only) 1 Pin 1-2 Closed: 133MHz (Default) 3 1 Pin 2-3 Closed: 100MHz max. 3 18
Résumé du contenu de la page N° 19
J16: Front Panel Header The Front Panel Header is used to connect some control or signal wires from motherboard to chassis, such as HDD LED, power LED, power button, and reset button. HDDLED+ 1 2 PWR LED+ HDDLED- 3 4 PWR LED- GND 5 6 PWR SW+ Reset+ 7 8 PWR SW- VCC5 9 10 Warning LED+ NMI 11 12 Warning LED- VCC3_SBY 13 14 Key SMBus Data 15 16 GND SMBus Clock 17 18 INTRU# FAN1/FAN2/FAN3/CPUFAN1/CPUFAN2: 4-pin Fan Connector Use th
Résumé du contenu de la page N° 20
2.4 - Tips on Installing Motherboard in Chassis Before installing your motherboard, make sure your chassis has the necessary motherboard support studs installed. These studs are usually metal and are gold in color. Usually, the chassis manufacturer will pre-install the support studs. If you are unsure of stud placement, simply lay the motherboard inside the chassis and align the screw holes of the motherboard to the studs inside the case. If there are any studs missing, you will know ri
