Instruction d'utilisation Renesas M16C/29

Résumé du contenu de la page N° 1

Renesas Starter Kit for M16C/29
Quick Start





1. Installation

Do not connect the E8a module until the software support has been installed.

1 Insert the CD into your computer’s CD-ROM drive. The CD should automatically run the installation program. If the installer does not start, browse to
the RSK directory from the CD root folder and double click on ‘setup.exe’.
2 The installer will ask you which language is to be used, please choose the appropriate one.
3 On the first

Résumé du contenu de la page N° 2

2. Connection 11 Now connect the E8a to J5/E8 on the RSK using the ribbon cable. 12 Connect the E8a module to a spare USB port. The ‘Found New Hardware’ Wizard will appear. Please follow the steps below to install the drivers. Note that administrator privileges are required for a Windows™ 2000/XP machine. Do not use the Windows Update to locate the driver. 13 Verify the “Recommended” option is selected and click . 14 If using Windows XP, skip to step 16; otherwise click

Résumé du contenu de la page N° 3

4. Programming and Debug 26 Ensure the “SessionM16C_E8a_SYSTEM” session in the right hand drop down list on the tool bar is selected. 27 Click the button on the debug toolbar 28 The “Emulator mode” wizard will be shown. Select the correct MCU group (M16C/29) and device type (e.g. M30290FC for RSKM16C29 ) Please note that the “Emulator mode” view shown here will only appear the FIRST time you connect to the target within a project. On subsequent connections the “Emul

Résumé du contenu de la page N° 4

5. Next Step After you have completed this quick start procedure, please review the tutorial code and sample code that came with the kit. You can add projects to the current workspace by selecting (Project > Insert Project) from the main menu. The tutorials will help you understand the device and development process using Renesas Development Tools. The Hardware manual supplied with this RSK is current at the time of publication. Please check for any updates to the device manual from the Re