Résumé du contenu de la page N° 1
OPERATING GUIDE for your
GEM-DXRP2 KEYPAD
AC ON READY
© NAPCO 2006 OI323 11/06
1
Résumé du contenu de la page N° 2
INTRODUCTION an explanation of terms that may be The GEM-DXRP2 is a “smart” user- Regardless of how your system has friendly, interactive menu-driven keypad unfamiliar to you. been configured, rest assured that it has designed for your Napco control panel. been carefully designed and engineered You'll probably find subjects Its alphanumeric screen will not only to the highest industry standards. To mentioned in this booklet that do not display the status of your system, but will as
Résumé du contenu de la page N° 3
TABLE OF CONTENTS TO SILENCE AN ALARM, ENTER YOUR TABLE OF CONTENTS CODE, AND PRESS J. Section Page FOR SERVICE, CALL: _____________________ KEYPAD CONTROLS & INDICATORS ............................................4 CENTRAL STATION: _____________________ SETTING THE ALARM (ARMING) WHEN LEAVING .......................6 EXIT DELAY: ___________________________ PROTECTING YOURSELF WHILE
Résumé du contenu de la page N° 4
KEYPAD CONTROLS & INDICATORS 1 2 3 AC ON READY 7 4 8 5 9 6 10 11 12 4
Résumé du contenu de la page N° 5
KEYPAD CONTROLS & INDICATORS Window. Displays system status INSTANT Button. (1) Cancels 1 5 10 BYPASS Button. (1) Deactivates messages, zone descriptions, etc. entry delay on Exit/Entry Zones, selected zones from the system. causing an instant alarm upon (2) Unbypasses a bypassed zone STATUS Light. Lights (green) to violation. (2) Scrolls window 2 (GEM-P3200/9600 panels only). indicate that the system is ready display backward (PRIOR). (3) for arming. If a zone is not Answers “NO”
Résumé du contenu de la page N° 6
SETTING THE ALARM (ARMING) WHEN LEAVING Arming the System READY AC ON Note: The keypad will autoscroll messages that are longer than one line. 1 Check the keypad. The green STATUS light must be on in order to arm. If the green light is off, “FAULT” will display in the window followed by the number of FAULT/ each faulted zone. Note each problem zone and secure it by closing a window, AC ON ZONE 02 door, etc. When all zones are secure, the green STATUS light will turn on and t
Résumé du contenu de la page N° 7
SETTING THE ALARM (ARMING) WHEN LEAVING Priority Arming. If you attempt to arm with a faulted Priority Zone, a 3-second tone will CAN'T/ sound at the keypad, and "CAN'T/ArmZnF" will display in the window, indicating that AC ON ArmZnF the trouble(s) must be corrected before the panel can be armed. A zone selected as Priority Zone with Bypass (check your Alarm Plan) may be bypassed if in trouble. If the problem cannot be corrected immediately, press C, then arm the panel. A 3
Résumé du contenu de la page N° 8
SETTING THE ALARM (ARMING) WHEN LEAVING If you attempt to arm with a “TROUBLE” display (alternating with a system trouble error code), a 3- TROUBLE TRBL second tone will sound at the keypad. (See SYSTEM TROUBLE ERROR CODES for descriptions AC ON of codes). The window will display “CAN'T ArmRst”. If you cannot correct the problem EXX-XX immediately, pressing C will enable you to arm in this condition. Be sure to call for service as TROUBLE soon as possible. CAN'T/ AC ON ArmRst
Résumé du contenu de la page N° 9
PROTECTING YOURSELF WHILE ON THE PREMISES Bypassing Interior Zones BYPASSED INTERIOR READY Interior Zones, when bypassed, allow free movement within the premises while the protection of AC ON armed perimeter zones is maintained. If E is pressed, all interior Zones will be bypassed upon arming. (OPTIONAL) Some control panels (such as the GEM-P9600) have provisions for TWO groups of Interior Zones. If two groups of zones were programmed, proceed as follows: INT1+2 1. Select t
Résumé du contenu de la page N° 10
PROTECTING YOURSELF WHILE ON THE PREMISES Instant Protection INSTANT ON ARMED When retiring for the evening, after all family members are home, you can cancel the AC ON entry delay on the Entry Zone(s). Then, when armed, opening the entry door will cause an immediate alarm. (When arming, exit delay will remain in effect). 1. To cancel the entry delay while on the premises, merely press F. (The F button may be pressed either before or after arming). 2. When armed, the w
Résumé du contenu de la page N° 11
TURNING OFF THE ALARM (DISARMING) WHEN RETURNING Disarming the System DISARM/ AC ON XXXSEC 1 Upon entry, the keypad sounder will pulse as a reminder to disarm the panel. The red ARMED light will be on and the window will alternately display "DISARM" and "XXXSEC", where "XXX" represents the entry time remaining in 10-second steps. During the final 10 Wrong/ seconds, the sounder will pulse (rapidly) a warning signal. AC ON Code 2 Enter your User Code and press D. The sounde
Résumé du contenu de la page N° 12
TURNING OFF THE ALARM (DISARMING) WHEN RETURNING Ambush (Optional) Your Ambush Code Type is: TYPE 1 (Prefix) TYPE 2 (Unique) My Ambush Code is ___________________ If an intruder forces you to disarm your system, enter your Ambush Code and press J. There are two types of Ambush Codes: (1) A 2-digit code (prefix) entered just prior to your normal User Code and (2) A separate and unique User Code. Example Type 1 (Prefix): If your User Code is 1234 and your Ambush Code is 99, pr
Résumé du contenu de la page N° 13
FIRE PROTECTION (Applicable only where local ordinance permits use of this alarm control panel for fire protection.) Fire-Zone Alarm reset FIRE ALARM FIRE/ If a fire is detected, “reset FIRE ALARM” will be displayed and the keypad sounder will AC ON ZONEXX pulse. 1. If a fire is in progress, evacuate the premises immediately! If necessary, call the Fire Department from an outside phone. 2. Press the C button to silence the keypad sounder. 3. If there is no evidence of a fire, ente
Résumé du contenu de la page N° 14
FIRE PROTECTION closed. 3. Test the door. If it is hot, use your Preparing a Fire Escape Plan alternate route through the window. If 2. One person sounds the alarm. Even with the most advanced fire the door is cool, brace your shoulder alarm system, adequate protection 3. Each person tests his door. against it and open it cautiously. Be requires an escape plan. 4. Pretend the door is hot and use the ready to slam the door if smoke or heat To prepare your plan, draw floor plan
Résumé du contenu de la page N° 15
FIRE PROTECTION Floorplan Draw a plan of your premises in the space provided below. Floorplan 15
Résumé du contenu de la page N° 16
FIRE PROTECTION LIMITATIONS OF FIRE ALARM WARNING SYSTEM reasons: (a) they may not sense fires that radio, air conditioner, or other appliance, or Although a fire alarm system may be of a start where smoke cannot reach them, such by passing traffic, etc. Alarm warning reliable and state-of- the-art design, neither it as in chimneys, walls, roofs, behind closed devices, however loud, may fail to warn the nor its peripheral detection devices can offer doors, etc.; (b) they may not sense a
Résumé du contenu de la page N° 17
KEYPAD FUNCTIONS The keypad can provide access to a wide assortment of utility functions. The functions are displayed in a prompting “YES/NO” format. While the messages are shown here in their entirety, actual displays will scroll automatically in two screens. Wait for the entire message to display. To skip a function, answer NO (press F); to select and execute a function, answer YES (press E) or D. The complete function list is provided here in its normal displayed sequence. However,
Résumé du contenu de la page N° 18
KEYPAD FUNCTIONS Display Telephone List? (OPTIONAL) (For GEM-P9600/3200 panels only). (Phone Numbers DspTel/List/ Programmed? YES NO). The panel can dial any of four programmed telephone numbers. Yes/No AC ON Select Telephone #1-4 using the NEXT and PRIOR buttons. Press D, then pick up the phone to automatically dial the displayed number. Display System Troubles? (For GEM-P9600/3200 panels only). Displays a 2-digit error code DspSys/Trbl/ (EXX-NN)
Résumé du contenu de la page N° 19
KEYPAD FUNCTIONS Activate Chime? "MONITOR ON" will be displayed and the Chime Mode will sound a tone TurnOn/Chime at the keypad when the programmed zone is opened while disarmed. To deactivate the Yes/No AC ON Chime Mode, execute the "TurnOff Chime" function. Note: The Chime Mode is disabled while armed. Activate Watch Mode? (Watch Mode programmed? YES NO). This optional feature TurnOn/Watch simultaneously turns on all zones designated as Day Zones. When activated,
Résumé du contenu de la page N° 20
KEYPAD FUNCTIONS Delay Arming 1-4 hours. (Not for UL-listed systems). Your system may be set to Delay/Arm 1-4/ /No arm automatically after a delay period of 1 to 4 hours, 15 minutes, as follows: AC ON For a 1-hour, 15-minute delay, press 1, then D. For a 2-hour, 15-minute delay, press 2, then D. For a 3-hour, 15-minute delay, press 3, then D. For a 4-hour, 15-minute delay, press 4, then D. Fifteen minutes prior to arming, the siren will sound a 2 second warning and the key- pad
