Résumé du contenu de la page N° 1
PX865PE7 Series
Copyright
All rights are reserved. No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system or translated into any language or computer language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the
prior written permission of the company. Brands and product names are trademarks or registered
trademarks of their respective companies.
The vendor makes no representa
Résumé du contenu de la page N° 2
Important, please read!!! The images and pictures in this manual are for reference only and may vary slightly from actual product installation depending on specific hardware models, third party components and software versions. Unplug your computer when installing components and configuring switches and pins. This mainboard contains very delicate IC chips. Use a grounded wrist strap when working with the system. Do not touch the IC chips, leads, connectors or other components. Unpl
Résumé du contenu de la page N° 3
® Intel 82865PE & ICH5 ® ® Supports Socket 775 Intel Pentium 4 Processor User Manual Enabling Hyper-Threading for your computer system requires ALL of the following components ® ® CPU: An Intel Pentium 4 Processor with HT Technology ® Chipset: An Intel Chipset that supports HT Technology BIOS: A BIOS that supports HT Technology must be enabled OS: An operating system that supports HT Technology For more information on Hyper-Threading Technology, go to:
Résumé du contenu de la page N° 4
Contents CHAPTER 1. GETTING STARTED ............................................................1 INTRODUCTION.......................................................................................................... 1 SPECIFICATION.......................................................................................................... 2 CONFIGURATION ....................................................................................................... 5 Layout of PX865PE7 PRO ...........
Résumé du contenu de la page N° 5
PX865PE7 PRO/ PX865PE7 Chapter 1. Getting Started Introduction Congratulations on choosing the PX865PE7 Series mainboard! The PX865PE7 series includes the PX865PE7 PRO and PX865PE7. These are based on the 82865PE Northbridge chipset and the ICH5 ® ® Southbridge chipset. It supports Intel Pentium 4 Processors with a FSB (Front Side Bus) frequency of 533/ 800 MHz. The PX865PE7 series provides 4 DIMM slots using 184 pin DDR SDRAM with a total capacity of up to 4GB. You can inst
Résumé du contenu de la page N° 6
PX865PE7 PRO/ PX865PE7 Specification CPU: ® Supports Socket 775 Pentium 4 processor (Prescott) Supports Hyper Threading Technology Speed: 533/ 800 MHz Front Side Bus frequency 33MHz, 32 bit PCI interface (PCI 2.3 compliant) 66MHz AGP 3.0 compliant interface that supports 8X/4X data transfer modes (0.8V or 1.5V) Chipset: Northbridge Chip (MCH) – Intel 82865PE Southbridge Chip (ICH) – Intel ICH5 I/O Controller – Winbond W83627THF AC’97 Codec – Realtek ALC655
Résumé du contenu de la page N° 7
PX865PE7 PRO/ PX865PE7 BUS Slots: AGP slot (AGP3.0, 0.8/ 1.5V) x 1 32-bit PCI bus slot x 5 Flash Memory: Supports flash memory functionality Supports ESCD functionality Hardware Monitor Function: Monitors all fan Speeds Monitors System Voltage Infrared: Supports IrDA Version 1.0 SIR Protocol with a maximum baud rate of up to 115.2 Kbps Supports SHARP ASK-IR Protocol with maximum baud rate of up to 57600 bps Marvell LAN Chip on board: (only for PX865PE7 PRO)
Résumé du contenu de la page N° 8
PX865PE7 PRO/ PX865PE7 IDE Facilities: Supports Ultra ATA 66, Ultra ATA 100, BMIDE and PIO modes Supports IDE interface with CD-ROM Supports high capacity hard disk drives Supports installation of up to 4 drives, with separate IDE connections for Primary and Secondary connectors I/O facilities: One multi-mode Parallel Port capable of supporting the following specifications: 1. Standard & Bi-direction Parallel Port 2. Enhanced Parallel Port (EPP) 3. Extended Capabil
Résumé du contenu de la page N° 9
PX865PE7 PRO/ PX865PE7 Configuration Layout of PX865PE7 PRO Layout of PX865PE7 5
Résumé du contenu de la page N° 10
PX865PE7 PRO/ PX865PE7 6
Résumé du contenu de la page N° 11
PX865PE7 PRO/ PX865PE7 Hardware Installation This section will assist you in quickly installing your system hardware. Wear a wrist ground strap before handling components. Electrostatic discharge may damage the system’s components. CPU Processor Installation ® ® This mainboard supports Intel Pentium 4 processors using a Socket 775. Before building your system, we suggest you visit the Intel website and review the processor installation procedures. http://www.intel.com CPU Sock
Résumé du contenu de la page N° 12
PX865PE7 PRO/ PX865PE7 FAN Headers Three power headers are available for cooling fans, which play an important role in maintaining the ambient temperature in your system. Attention We strongly recommend that you use a CPU fan sink with your CPU. You can attach the CPU fan sink to the CPUFAN Header. Memory Installation The series contains 4 memory slots which use 184 pin DDR SDRAM with a total memory capacity of up to 4 GB. You can install unbu
Résumé du contenu de la page N° 13
PX865PE7 PRO/ PX865PE7 To Enable Dual-Channel DDR, the following conditions must be met: 1.You must use either DIMM1 & DIMM3 together or DIMM2 & DIMM4 together or all four DIMM slots together. 2.You must use matching DIMM configurations between DIMM1 & DIMM3. You must use matching DIMM configurations between DIMM2 & DIMM4. Same Density (128MB, 256MB, 512MB, etc.) Same DRAM technology (128Mb, 256Mb, or 512Mb) Same DRAM bus width (x8 or x16) Both either single-sided or dua
Résumé du contenu de la page N° 14
PX865PE7 PRO/ PX865PE7 Back Panel Configuration PS/2 Mouse & PS/2 Keyboard Connectors: KB/MS The series mainboard provides a standard PS/2 mouse connector and PS/2 Keyboard connector. The pin assignments are described below: Pin Assignment Pin Assignment 1 Data 4 +5 V (fused) 2 No connect 5 Clock 3 Ground 6 No connect USB & LAN Connectors: USB & USB/ (LAN is optional) There are four USB connectors on the back panel. These USB connectors are used
Résumé du contenu de la page N° 15
PX865PE7 PRO/ PX865PE7 Serial and Parallel Interface Ports The series mainboard comes equipped with two serial ports and one parallel port on the back panel. These interface ports will be explained below. Printer Port COM1 COM2 Parallel Interface Port: PRT The parallel port on your system has a 25-pin, DB25 connector and is used to interface with parallel printers and other devices using a parallel interface. The Serial Interface: COM1/ COM2 The serial interfa
Résumé du contenu de la page N° 16
PX865PE7 PRO/ PX865PE7 Connectors Floppy Disk Connector: FDC The series mainboard provides a standard floppy disk connector (FDC) that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy diskettes. This connector supports the floppy drive ribbon cables provided in the packaging. Hard Disk Connectors: IDE1-2/ SATA1-2 The series mainboard has a 32-bit Enhanced PCI IDE Controller that supports PIO Mode 0~4, Bus Master, Ultra ATA 66/ 100. This mainboard has two IDE connectors, IDE
Résumé du contenu de la page N° 17
PX865PE7 PRO/ PX865PE7 HD LED (Hard Drive LED Connector/ red) This connector can be attached to an LED on the front panel of a computer case. The LED will flicker during any disk activity. RST SW (Reset Connector/ blue) This connector can be attached to a momentary SPST switch. This switch is normally left open. When closed it will cause the mainboard to reset and run the POST (Power On Self Test). PWR-LED (2-pin Power LED/ green) The mainboard pro
Résumé du contenu de la page N° 18
PX865PE7 PRO/ PX865PE7 Headers & Jumpers Front USB Headers: USB2/ USB3 These mainboards provide 2 USB headers on the board allowing for 4 additional USB ports. To make use of these headers, you must attach a USB bracket/cable with USB ports. The optionally packaged bracket will have two connectors that you can connect to the headers (USB2, USB3). The other end (bracket containing the USB ports) is attached to the computer casing. If you are using a USB 2.0
Résumé du contenu de la page N° 19
PX865PE7 PRO/ PX865PE7 Infrared Header: IrDA You can attach an infrared device to this connector and use this connector for connectionless infrared data transfers. Clear CMOS Jumper: JP1 The “Clear CMOS” jumper allows you to reset your CMOS configurations. This is particularly useful when you have forgotten your system password and cannot boot to the operating system. The following steps explain how to reset your CMOS configuration
Résumé du contenu de la page N° 20
PX865PE7 PRO/ PX865PE7 Audio Connectors This mainboard provides three connectors as part of its audio Subsystem. CD-ROM Audio-In Header: CD-IN This header is used to connect to a CD-ROM / DVD audio cable. S/PDIF Header: SPDIF S/PDIF (Sony/Philips Digital Interface) is an audio transfer file format, which provides high quality audio using optical fiber and digital signals. This mainboard is capable of delivering audio output and receiving audio
