Résumé du contenu de la page N° 1
USER'S MANUAL
Of
Intel G41 Express Chipset
&
Intel ICH7 Chipset
Based
M/B for LGA 775 Quad Core Ready
Intel Core Processor Family
PMG41-D2
MB: Rev: 1.0
Manual: Rev: EG100
Release date: Nov., 2009
Trademark:
* Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.
Résumé du contenu de la page N° 2
TABLE OF CONTENT CHAPTER 1 INTRODUCTION OF INTEL G41 MOTHERBOARD SERIES 1-1 FEATURES OF MOTHERBOARD .................................................................................... 1 1-1.1 SPECIAL FEATURES OF MOTHERBOARD....................................................2 1-2 SPECIFICATI
Résumé du contenu de la page N° 3
Chapter 1 Introduction of Intel G41 Motherboard Series 1-1 Features of motherboard The Intel G41 chipset motherboard series are based on the latest Intel G41 Express Chipset and Intel ICH7 Chipset technology which supports the innovative 65nm and 90nm Intel® Pentium® 4 Processor， Celeron 4xx Processor, Dua
Résumé du contenu de la page N° 4
1-1.1 Special Features of Motherboard CPU Thermal Throttling Technology---(The CPU Overheat Protection Technology) To prevent the increasing heat from damage of CPU or accidental shutdown while at high workload, the CPU Thermal Throttling Technology will force CPU to enter partially idle mode from 87.
Résumé du contenu de la page N° 5
1-2 Specification Spec Description Design Micro ATX form factor 4 layers PCB size: 24.5*18cm Intel G41 Memory Controller Hub (MCH) Chipset Chipset Intel 82801GB I/O Controller Hub (ICH7) Chipset Support 45nm and 65nm Quad-Core, Dual-Core Intel® Core 2 Quad, Core 2 Duo processors, Intel® Pentium Du
Résumé du contenu de la page N° 6
1-3 Item Checklist Intel G41 Platform Processor Chipset based motherboard Cable for IDE CD for motherboard utilities Cable for Serial ATA Port Intel G41 Platform Processor Chipset motherboard User’s Manual Back panel 1-4 Layout Diagram & Jumper Setting KB／MS Power ON Jumper (JP1) CPU
Résumé du contenu de la page N° 7
Chapter 2 Hardware Installation 2-1 Install LGA 775 Supported Intel Processor This motherboard provides a 775-pin surface mount, LGA775 Land Grid Array socket, referred to as the LGA775 socket supports Intel Pentium 4 processor in the 775 Pin package utilizes Flip-Chip Land Grid Array (FC-LGA) package te
Résumé du contenu de la page N° 8
1. One DIMM Module ----Plug in DIMM1 2. Two DIMM Modules---Plug in DIMM1 and DIMM2 for Dual channel function For Dual channel Limited! 3. Dual channel function only supports when 2 DIMM Modules plug in either both DIMM1 & DIMM2 4. DIMM1 & DIMM2 must be the same type, same size, and same frequency for dua
Résumé du contenu de la page N° 9
2-3 Expansion Cards The G41 motherboard series offer one PCI-Express x16 graphics slot of 8Gbyte/sec data transfer rate at each relative direction which gets 7 times of bandwidth more than AGP 8X and it’s up to a peak concurrent bandwidth of 16Gbyte/sec at full speed to guarantee the ultimate GPU computing
Résumé du contenu de la page N° 10
Chapter 3 Connectors, Headers & Jumpers Setting 3-1 Connectors (1) Power Connector (24-pin block): ATXPWR ATX Power Supply connector: ROW1 ROW2 This is a new defined 24-pins PIN ROW1 ROW2 connector that usually comes with ROW1 ROW2 1 3.3V 3.3V ATX case. The ATX Power Supply 2 3.3V -1
Résumé du contenu de la page N° 11
(6) Audio Line-In, Lin-Out, MIC Connector: SURROUND1 This Connector is 3 phones Jack for LINE-OUT, LINE-IN, and MIC Audio output to speaker Line-out: (GREEN) Line-in: (BLUE) Audio input to sound chip MIC: (PINK) Microphone Connector PS/2 Line-IN Mouse LAN COM Line-
Résumé du contenu de la page N° 12
ID IDE E1 1 Pin 1 Primary IDE Connector (9) Serial-ATA Port connector: SATA1 / SATA2 / SATA3/ SATA4 • These connectors support the provided Serial ATA and Serial ATA2 IDE hard disk cable to connecting the motherboard and serial ATA hard disk. SATA4 SATA3 SATA2
Résumé du contenu de la page N° 13
3-2 Headers (1) Line-Out/MIC Header for Front Panel (9-pin): AUDIO This header is connected to Front Panel Line-out, MIC connector with cable. AUDIO 2 10 Pin 1 9 Line-Out, MIC Headers (2) USB Port Headers (9-pin) : USB2 / USB3 These headers are used for connecting the additio
Résumé du contenu de la page N° 14
(7) Power switch: PWR BTN This 2-pin connector connects to the case-mounted power switch to power ON/OFF the system. PWRLED Pin 1 JW FP SPEAK Pin 1 Pin 1 System Case Connections (8) FAN Power Headers: SYSFAN1, SYSFAN2 (3-pin), CPUFAN (4-pin) These connectors support cooling fans of 350
Résumé du contenu de la page N° 15
(10) Parallel Port header (25-pin): PARALLEL The On-board Parallel Port can be disabled through the BIOS SETUP. . Pin 1 PARALLEL Connector (11) SPDIF Out header: SPDIF Out The SPDIF output is capable of providing digital audio to external speakers or compressed AC3
Résumé du contenu de la page N° 16
Chapter 4 DRIVER & FREE PROGRAM INSTALLATION Check your package and there is A CD included. This CD consists of all DRIVERS you need and some free application programs and utility programs. In addition, this CD also include an auto detect software which can tell you which hardware is installed, and which DR
Résumé du contenu de la page N° 17
Windows XP Windows 2000 From MENU you may make as selections: 1. INF install Intel INF chipset system driver 2. VGA install VGA chipset driver 3. LAN install LAN Driver 4. SOUND install Audio driver 5. BROWSE CD to browse the contents of the CD 15
Résumé du contenu de la page N° 18
4-1 INF: Install Intel INF Chipset System Driver Windows VISTA/ 7 Windows XP Windows 2000 16
Résumé du contenu de la page N° 19
4-2 VGA: VGA Driver Windows VISTA/ 7 Windows XP Windows 2000 17
Résumé du contenu de la page N° 20
4-3 LAN: LAN Driver Windows VISTA/ 7 Windows XP Windows 2000 18
