Résumé du contenu de la page N° 1
8S651M-RZ /
8S651M-RZ-C
®
Intel Pentium 4 Processor Motherboard
User's Manual
Rev. 1001
12ME-8S651MRZ-1001
Copyright
© 2003 GIGABYTE TECHNOLOGY CO., LTD
Copyright by GIGA-BYTET ECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any from
without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the property of their respective owners.
Notice
Please do not remove any labels on motherboard, this may void the warranty of this
Résumé du contenu de la page N° 2
Mother Board 8S651M-RZ Motherboard 8S651M-RZ Feb. 20 ,2004 Feb. 20, 2004
Résumé du contenu de la page N° 3
Preparing Your Computer Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Unplug your computer when working on the inside. 2. Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case. 3. Ho
Résumé du contenu de la page N° 4
Table of Content Chapter 1 Introduction ................................................................................................5 Features Summary ..............................................................................................................................5 8S651M-RZ Series Motherboard Layout ............................................................................................7 Block Diagram .........................................................................
Résumé du contenu de la page N° 5
English Chapter 1 Introduction Features Summary ® ® CPU Socket 478 for Intel M icro FC-PGA2 Pentium 4 processor ® ® Support Intel Pentium 4 (Northwood, 0.13 m) processor ® Intel Pentium 4 400/533 M Hz FSB 2nd cache depends on CPU Chipset North Bridge:SiS 651 South Bridge:SiS 962L MuTIOL Media I/O Memory 2 184-pin DDR sockets Supports DDR200/DDR266/DDR333 Supports up to 2 un-buffer Double-sided DIMM DDR200/266 /333 Supports up to 2GB (Max) Supports only 2.5V DDR DIMM Slots
Résumé du contenu de la page N° 6
Hardware M onitor CPU/System Fan Revolution detect CPU/System Fan Control CPU Overheat Warning System Voltage Detect Additional Features PS/2 Keyboard power on by password PS/2 Mouse power on STR(Suspend-To-RAM) AC Recovery USB KB/M ouse wake up from S3 Supports EasyTune 4 Supports @BIOS Form Factor 24.4cm x 21.5cm M icro ATX size form factor, 4 layers PCB. Please set the CPU host frequency in accordance with your processor's specifications. We don't recommend you to set
Résumé du contenu de la page N° 7
English 8S651M-RZ Series Motherboard Layout 21.5 cm DIMM _LED KB_MS A TX_12V ATX FDD * USB_LAN * RTL820 1 SOC KET478 F_AU DIO SiS 651 CD_IN AGP SUR_CEN PCI1 CODEC SiS 962L CI PCI2 PCI3 BAT SYS _FAN IR BIOS CLR_CMOS F_PANEL SPDIF_IO PWR_LE D COMB F_U SB2 F_U SB1 “ * ” For 8S651M-RZ only. - 7 - Introduction MIC_IN LINE_OUT VGA -C LINE_IN COMA GAME LPT W83697HF 8S651M-RZ CPU_FAN DDR1 DDR2 IDE2 IDE1 24.4 cm
Résumé du contenu de la page N° 8
Block Diagram Pentium 4 CPUCLK+/- (100/133 MHz) Socket 478 CPU AGP 2X/4X System Bus VGA Port AGPCLK 400/533 MHz (66MHz) DDR 200/266/333MHz SiS 651 ZCLK (66MHz) HCLK+/- (100/133 MHz) * RJ45 66 MHz 3 PCI 33 MHz 14.318 MHz 48 MHz * RTL8201 BIOS SiS 962L Game Port AC97 Link LPC BUS Floppy W83697HF LPT Port AC97 PS/2 PCICLK CODEC KB/Mouse 24 MHz (33MHz) 33 MHz 6 USB ATA33/66/100/133 Ports IDE Channels COM Ports ZCLK (66MHz) PCICLK (33MHz) CPUCLK+/- (100/133 MHz) CLK GEN USBCLK (48MHz) AGPCLK (66M
Résumé du contenu de la page N° 9
English Hardware Installation Process To set up your computer, you must complete the following steps: Step 1- Install the Central Processing Unit (CPU) Step 2- Install mem ory modules Step 3- Install expansion cards Step 4- Install I/O Peripherals cables Step 4 Step 1 Step 2 Step 4 Step 4 Step 3 Step 1: Install the Central Processing Unit (CPU) Before installing the processor, adhere to the following warning: 1. Please m ake sure the CPU type is supported by the m otherboard. 2. The processor wi
Résumé du contenu de la page N° 10
Step 1-1: CPU Installation Figure 1. Socket Pull the rod to the 90-degree directly. Actuation Lever Figure 2. Locate Pin 1 in the socket and look for a (golden) cut edge on the CPU upper corner. Insert the CPU into the socket. (Do not force the CPU into the socket.) Then m ove the socket lever to the locked position while holding pressure on the center of the CPU. Step 1-2: CPU Cooling Fan Installation Figure 1. Apply the therm al tape(or grease) to provide better heat conduction between your CP
Résumé du contenu de la page N° 11
English Step 2: Install memory modules Before installing the m emory modules, adhere to the following warning: 1. When DIMM LED is ON, do not install / remove DIMM from socket. 2. Please note that the DIMM module can only fit in one direction due to the one notch. Wrong orientation will cause improper installation. Please change the insert orientation. The motherboard has 2 dual inline memory m odule (DIM M) sockets. The BIOS will automatically detects memory type and size. To install the memory
Résumé du contenu de la page N° 12
Step 3: Install expansion cards 1. Read the related expansion card's instruction document before install the expansion card into the com puter. 2. Please make sure your AGP card is AGP 4X/8X (1.5V). 3. Please carefully pull out the small white- drawable bar at the end of the AGP slot when you try to install/ Uninstall the AGP card. Please align the AGP card to the onboard AGP slot and press firmly down on the slot .M ake sure your AGP card is locked by the sm all white- drawable bar. AGP Card S
Résumé du contenu de la page N° 13
English z VGA port Monitor can be connected to VGA port. { Game/MIDI port This connector supports joystick, M IDI keyboard and other relate audio devices. | Line Out jack Connect the stereo speakers or earphone to this connector. } Line In jack Devices like CD-ROM , walkm an etc. can be connect to Line In jack. ~ MIC In jack Microphone can be connect to MIC In jack. After installation of the audio driver, you are able to use 2/4/6-channel audio feature by software selection. You can connect "Fro
Résumé du contenu de la page N° 14
1) ATX_12V (+12V Power Connector) This connector (ATX _12V) suppliesthe CPU operation voltage (Vcore). If this " ATX_ 12V connector" is not connected, system cannot boot. Pin No. Definition 1 GND 3 4 2 GND 2 1 3 +12V 4 +12V 2) ATX (ATX Power) AC power cord should only be connected to your power supply unit after ATX power cable and other related devices are firmly connected to the mainboard. Pin No. Definition Pin No. Definition 1 1 1 1 3.3V 11 3.3V 2 3.3V 12 -12V 3 GND 13 GND 4 VCC 14 PS_ON(sof
Résumé du contenu de la page N° 15
English 4) SYS_FAN (System FAN Connector) This connector allows you to link with the cooling fan on the system case to lower the system temperature. Pin No. Definition 1 GND 1 2 +12V 3 Sense 5) IDE1/ IDE2(IDE1/IDE2 Connector) Please connect first harddisk to IDE1 and connect CDROM to IDE2. The red stripe of the ribbon cable must be the same side with the Pin1. 4 0 3 9 2 1 IDE2 IDE1 6) FDD (Floppy Connector) Please connect the floppy drive ribbon cables to FDD. It supports 360K,720K,1.2M,1.44M
Résumé du contenu de la page N° 16
7) DIMM_LED Do not remove memory modules while DIMM LED is on. It might cause short or other unexpected damages due to the 2.5V stand by voltage. Remove m emory m odules only when AC Power cord is disconnected. + - 8) F_PANEL (2x10 pins connector) Please connect the power LED, PC peaker, reset switch and power switch etc of your chassis front panel to the F_PANEL connector according to the pin assignment above. So ft Power Spea ker Co nnector Me ssa g e LED /Po we r / Conne ctor Sle ep L ED PW-
Résumé du contenu de la page N° 17
English 9 ) PWR_LED PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It will blink when the system enters suspend mode. If you use dual color LED, power LED will turn to another color. Pin No. Definition 1 MPD+ 1 2 MPD- 3 MPD- 10) BAT (Battery) + CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the sam e or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instruc
Résumé du contenu de la page N° 18
11) F_AUDIO (F_AUDIO Connector) If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper. In order to utilize the front audio header, your chassis must have front audio connector. Also please make sure the pin assigment on the cable is the same as the pin assigment on the MB header. To find out if the chassis you are buying support front audio connector, please contact your dealer.Please note, you can have the alternative of using front audio connector or of using rear audio co
Résumé du contenu de la page N° 19
English 14) SPDIF_IO (SPDIF In/Out) The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby Digital Decoder. Use this feature only when your stereo system has digital input function. Use SPDIF IN feature only when your device has digital output function. Be careful with the polarity of the SPDIF_IO connector. Check the pin assignm ent carefully while you connect the SPDIF_IO cable, incorrect connection between the cable and connect
Résumé du contenu de la page N° 20
17) COMB (COM B Connector) Be careful with the polarity of the COMB connector. Check the pin assignm ent while you connect the COMB cable. Please contact your nearest dealer for optional COMB cable. Pin No. Definition 1 NDCDB- 2 NSINB 2 1 0 3 NSOUTB 4 NDTRB- 5 GND 1 9 6 NDSRB- 7 NRTSB- 8 NCTSB- 9 NRIB- 10 No Pin 18) CI (CASE OPEN) This 2 pin connector allows your system to enable or disable the "case open" item in BIOS if the system case begin rem ove. Pin No. Definition 1 1 Signal 2 GND 19) CLR
