Résumé du contenu de la page N° 1
NS9210 Processor Module
Hardware Reference
90001002_A
August 2008
Résumé du contenu de la page N° 2
©2008 Digi International Inc. All rights reserved. Digi, Digi International, the Digi logo, a Digi International Company, Digi JumpStart Kit, ConnectCore, NET+, NET+OS and NET+Works are trademarks or registered trademarks of Digi International, Inc. in the United States and other countries worldwide. All other trademarks are the property of their respective owners.
Résumé du contenu de la page N° 3
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Customer support .............................................................................. 7 Chapter 1: About the Module .............................. 9 Features and functionality ............................................................10 Module variant ................................................................................10 M
Résumé du contenu de la page N° 4
GPIO multiplex table .........................................................................28 External interrupts ............................................................................32 Interfaces ................................................................................33 10/100 Mbps Ethernet port ..................................................................33 UART ............................................................................................33 SPI ...........
Résumé du contenu de la page N° 5
LEDs ...................................................................................... 44 WLAN LED LE7 ................................................................................. 44 Power LEDs, LE3 and LE4 .................................................................... 44 User LEDs, LE5 and LE6 ...................................................................... 44 Serial status LEDs ............................................................................. 45 Status LEDs Se
Résumé du contenu de la page N° 6
Power Jack, X24 ...............................................................................58 Ethernet interface .....................................................................58 RJ-45 pin allocation, X19 ....................................................................59 LEDs .............................................................................................60 Peripheral (expansion) headers ......................................................60 Peripheral application he
Résumé du contenu de la page N° 7
This guide provides information about the Digi NS9210 Processor Module embedded core module. Conventions used This table describes the typographic conventions used in this guide: in this guide This convention Is used for italic type Emphasis, new terms, variables, and document titles. monospaced type Filenames, pathnames, and code examples. Digi information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 8
8 ConnectCore 9P 9215 Hardware Reference
Résumé du contenu de la page N° 9
About the Module CHA P T E R 1 The NS9210 Processor Module is part of the ConnectCore embedded core processor module family. Built on leading Digi technology, the network-enabled ConnectCore 9P family provides a modular and scalable core processor solution that significantly minimizes hardware and software design risk. This module combines superior performance and a complete set of integrated peripherals and component connectivity options in a compact and versatile form factor. The NS9210 P
Résumé du contenu de la page N° 10
Chapter 1 Features and functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-bit NET+ARM (ARM926EJ-S) RISC processor NS9215 @ 150MHz ARM9 core with memory management unit (MMU) 4K data cache/4K instruction cache 8MB SDRAM (can support a maximum of 64MB SDRAM) 4MB NOR Flash (can support a maximum of 16MB NOR flash) 10 general purpose timers; NS9210 Processor Module
Résumé du contenu de la page N° 11
Pinout legend: Type I Input O Output I/O Input or output PPower X1 pinout X1 pin Type Module functionality Usage on Comments number Development board 1 P GND GND 2 P GND GND 3 I RSTIN# RSTIN# 10k pull-up on module 4 O PWRGOOD PWRGOOD Output of the reset controller push pull with 470R current limiting resistor 5 O RSTOUT# RSTOUT# Output of logical AND function between NS9215 RESET_DONE and NS9215 RESET_OUT# 6 I TCK TCK JTAG - 10k pull-up on module 7 I TMS TMS JTAG - 10k pull-up on module 8 I
Résumé du contenu de la page N° 12
Chapter 1 X1 pin Type Module functionality Usage on Comments number Development board 20 P GND GND 21 I/O D0 D0 Buffered Data - only active when either CS0# or CS2# is active NS9215 D[31:16] 22 I/O D1 D1 23 I/O D2 D2 24 I/O D3 D3 25 I/O D4 D4 26 I/O D5 D5 27 I/O D6 D6 28 I/O D7 D7 29 I/O D8 D8 30 I/O D9 D9 31 I/O D10 D10 32 I/O D11 D11 33 I/O D12 D12 34 I/O D13 D13 35 I/O D14 D14 36 I/O D15 D15 37 P GND GND 38 O AO AO Buffered Address always active 39 O A1 A1 40 O A2 A2 41 O A3 A3 42 O A4 A4
Résumé du contenu de la page N° 13
X1 pin Type Module functionality Usage on Comments number Development board 51 O A13 A13 52 O A14 A14 53 O A15 A15 54 O A16 A16 55 O GND GND 56 O EXT_OE# EXT_OE# 57 O EXT_WE# EXT_WE# 58 O CSO# CSO# 59 O CS2# CS2# 60 O BLE# BLE# NS9215 BE2# 61 O BHE# BHE# NS9215 BE3# 62 I EXT_WAIT# EXT_WAIT# 10k pull-up on module 63 O BCLK BCLK Connected over a 22R resistor to NS9215 CLK_OUT1 pin 64 P GND GND 65 I ETH_TPIN ETH_TPIN 66 O ETH_ACTIVITY# ETH_ACTIVITY# Low active signal with 330R resistor on module
Résumé du contenu de la page N° 14
Chapter 1 X1 pin Type Module functionality Usage on Comments number Development board 78 P VRTC VRTC Backup Battery for RTC, for 3V cell. Can be left floating, if RTC backup not needed. 79 P VLIO VLIO Mobile: Power from Li-Ion Battery (2.5V-5.5V) Non-Mobile: connected to 3.3V 80 P GND GND 14 NS9210 Processor Module Hardware Reference
Résumé du contenu de la page N° 15
X2 pinout X2 pin Type Module functionality Usage on Comments number Development board 1 P GND 2 P GND 3 I/O DCDA#/ DMA0_DONE/ PIC_0_GEN_IO[0] GPIO0/ SPI_EN (dup) 4I/O CTSA#/ EIRQ0/ PIC_0_GEN_IO[1] GPIO1/ -reserved- 5I/O DSRA#/ EIRQ1/ PIC_0_GEN_IO[2] GPIO2/ -reserved- 6 I/O RXDA/ DMA0_PDEN/ PIC_0_GEN_IO[3] GPIO3/ SPI_RX (dup) 7I/O RIA#/ EIRQ2/ Timer6_in/ GPIO4 SPI_CLK (dup)/ 8 I/O RTSA#/ RS485CTLA EIRQ3/ Timer6_Out/ GPIO5/ SPI_CLK (dup)/ 9 I/O DTRA#/ TXCLKA DMA0_REQ/ Timer7_In/ GPIO6/ PIC_DBG_DAT
Résumé du contenu de la page N° 16
Chapter 1 X2 pin Type Module functionality Usage on Comments number Development board 10 I/O TXDA/ Timer8_In/ Timer7_Out/ GPIO7/ SPI_TX (dup) 11 I/O DCDC#/ DMA1_DONE/ Timer8_Out/ GPIO8/ SPIB_EN (dup)/ 12 I/O CTSC#/ I2C_SCK/ EIRQ0 (dup)/ GPIO9/ PIC_DBG_DATA_IN 13 I/O DSRC#/ QDCI/ EIRQ1 (dup) GPIO10/ PIC_DBG_CLK 14 I/O RXDC/ DMA1_DP/ EIRQ2 (dup)/ GPIO11/ SPI_RXboot 15 I/O RIC#/ RXCLKC When booting, NS9215 RIC# signal is default configured as I2C_SDA/ Output, RST_DONE. To avoid RST_DONE/ input/o
Résumé du contenu de la page N° 17
X2 pin Type Module functionality Usage on Comments number Development board 18 I/O TXDC/ Timer9_In/ PIC_0_CAN_TXD GPIO15/ SPI_ENboot 19 I/O DCDB# (dup)/ PIC_0_BUS_1[8] PIC_1_BUS_1[8] GPIO51/ 20 I/O CTSB# (dup)/ PIC_0_BUS_1[9] PIC_1_BUS_1[9] GPIO52/ 21 I/O DSRB# (dup)/ PIC_0_BUS_1[10] PIC_1_BUS_1[10] GPIO53/ 22 I/O RXDB (dup)/ PIC_0_BUS_1[11] PIC_1_BUS_1[11] GPIO54/ 23 I/O RIB# (dup)/ PIC_0_BUS_1[12] PIC_1_BUS_1[12] GPIO55/ 24 I/O RTSB# (dup) / RS485CTLB (dup) / PIC_0_BUS_1[13] PIC_1_BUS_1[13] GP
Résumé du contenu de la page N° 18
Chapter 1 X2 pin Type Module functionality Usage on Comments number Development board 27 I/O DCDD# (dup) / PIC_0_BUS_1[16] PIC_1_BUS_1[16] GPIO59/ 28 I/O CTSD# (dup)/ PIC_0_BUS_1[17] PIC_1_BUS_1[17] GPIO60/ 29 I/O DSRD# (dup)/ PIC_0_BUS_1[18] PIC_1_BUS_1[18] GPIO61/ 30 I/O RXDD (dup)/ PIC_0_BUS_1[19] PIC_1_BUS_1[19] GPIO62/ 31 I/O RID# (dup)/ PIC_0_BUS_1[20] PIC_1_BUS_1[20] GPIO63/ 32 I/O RTSD# (dup) / RS485CTLD(dup) / PIC_0_BUS_1[21] PIC_1_BUS_1[21] GPIO64/ 33 I/O TXCLKD (dup) / DTRD# (dup) / P
Résumé du contenu de la page N° 19
X2 pin Type Module functionality Usage on Comments number Development board 37 I/O PIC_0_GEN_IO[1] PIC_1_GEN_IO[1] PIC_1_CAN_TXD GPIO69 38 I/O PIC_0_GEN_IO[2] PIC_1_GEN_IO[2] PWM0/ GPIO70 39 I/O PIC_0_GEN_IO[3] PIC_1_GEN_IO[3] PWM1/ GPIO71 40 I/O PIC_0_GEN_IO[4] PIC_1_GEN_IO[4] PWM2/ GPIO72 41 I/O PIC_0_GEN_IO[5] PIC_1_GEN_IO[5] PWM3/ GPIO73 42 I/O PIC_0_GEN_IO[6] PIC_1_GEN_IO[6] Timer0_In/ GPIO74 43 I/O PIC_0_GEN_IO[7] PIC_1_GEN_IO[7] Timer1_In/ GPIO75 44 I/O PIC_0_CTL_IO[0] PIC_1_CTL_IO[0] Tim
Résumé du contenu de la page N° 20
Chapter 1 X2 pin Type Module functionality Usage on Comments number Development board 47 I/O PIC_0_CTL_IO[3] PIC_1_CTL_IO[3] Timer5_In/ GPIO79 48 I/O PIC_0_BUS_0[0] PIC_1_BUS_0[0] Timer6_In (dup)/ GPIO80 49 I/O PIC_0_BUS_0[1] PIC_1_BUS_0[1] Timer7_In (dup)/ GPIO81 50 I/O PIC_0_BUS_0[2] PIC_1_BUS_0[2] Timer8_In (dup)/ GPIO82 51 I/O PIC_0_BUS_0[3] PIC_1_BUS_0[3] Timer9_In (dup)/ GPIO83 52 I/O PIC_0_BUS_0[4] PIC_1_BUS_0[4] Timer0_Out/ GPIO84 53 I/O PIC_0_BUS_0[5] PIC_1_BUS_0[5] Timer1_Out/ GPIO85 5
