Résumé du contenu de la page N° 1
®
Intel X18-M/X25-M SATA Solid State Drive
SSDSA1MH080G1, SSDSA2MH080G1
Advance Product Manual
Available in 1.8” and 2.5” Form Factors Power Management
Capacity: 80 GB — 3.3 V (1.8”) or 5 V (2.5”) SATA Supply Rail
Uses Intel NAND flash memory Multi-Level Cell — Supports ATA Power Management and
(MLC) components Advanced Power Management Specifications
Bandwidth Performance Specifications — SATA Interface Power Management
— Sustained Sequential Read: Upto 250 MB/s — OS-Aware Hot Plug/Remova
Résumé du contenu de la page N° 2
L Ordering Information Decoder S S D S A 1 M H 0 8 0 G 1 Product Type Designator SSD = Solid State Disk Bus Architecture PA = PATA Product Generation SA = SATA 1-9 Generations US = Universal Serial Bus Form Factor Density 1 = 1.8" Drive 004G = 4 GB 2 = 2.5" Drive 008G = 8 GB Product Technology Type 016G = 16 GB S = Single Level Cell 032G = 32 GB M = Multi-Level Cell 064G = 64 GB 080G = 80 GB Feature H = High Performance Intel High Perform
Résumé du contenu de la page N° 3
® Intel X18-M/X25-M SATA SSD Contents 1.0 Introduction ..............................................................................................................5 1.1 Product Overview ................................................................................................5 1.2 Block Diagram ....................................................................................................6 1.3 Architecture..............................................................................
Résumé du contenu de la page N° 4
® Intel X18-M/X25-M SATA SSD 9.0 Revision History.......................................................................................................26 ® Intel X18-M/X25-M SATA Solid State Drive Advance Product Manual July 2008 4 Order Number: 319765-002US
Résumé du contenu de la page N° 5
® Intel X18-M/X25-M SATA SSD 1.0 Introduction ® The Intel X18-M/X25-M SATA Solid State Drive (SSD) delivers leading performance in industry standard 1.8” and 2.5” form factors while simultaneously improving system responsiveness for mobile applications over standard rotating drive media or hard disk drives. By combining Intel’s leading NAND flash memory technology with our innovative high performance controller, Intel delivers an SSD for Native Serial Advanced Technology Attachment (SATA) h
Résumé du contenu de la page N° 6
® ® In Inte tel l X18- X18-M/X25-M SA M/X25-M SAT TA A S SS SD D 1.2 Block Diagram Figure 1. Block Diagram NAND Flash Memory Flash Channel 0 Memory Intel Flash Memory System NAND SATA Interface Channel ... Flash On A Chip Memory (SOC) NAND Flash Memory Flash Channel n Memory 1.3 Architecture The Intel X18-M/X25-M SATA SSDs utilize a cost effective System on a Chip (SOC) design to manage a full SATA 3 Gb/s bandwidth with the host while managing multiple flash memory devices on multiple channe
Résumé du contenu de la page N° 7
® Intel X18-M/X25-M SATA SSD Table 1. Device Certifications (Continued) Certification Description Compliance with paragraph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of MIC Certified the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea. Microsoft WHQL Microsoft Windows Hardware Quality Labs RoHS Compliant Restriction of Hazardous Substance Directive
Résumé du contenu de la page N° 8
® ® In Inte tel l X18- X18-M/X25-M SA M/X25-M SAT TA A S SS SD D Table 5. Latency Specifications Type Average Latency Read 85 µs (TYP) Write 115 µs (TYP) Power On to Ready 1 s Notes: 1. Write Cache Enabled. 2. Device measured using IOmeter. 3. Power On To Ready time assumes proper shutdown (power removal preceded by STANDBY command). 4. Read/Write latency measured on 4 K transfers. 3.3 Electrical Characteristics 3.3.1 Supply Voltage Table 6. Operating Voltage Description Min Max Unit Operating V
Résumé du contenu de la page N° 9
® Intel X18-M/X25-M SATA SSD 3.4 Environmental Conditions 3.4.1 Temperature Table 8. Temperature Related Specifications Mode Min Typ Max Unit o Operating 0 70 C Ambient Temperature o Non-Operating -55 95 C o Operating 20 C/hr * Temperature Gradient o Non-Operating 30 C/hr * Operating 5 95 % Humidity Non-Operating 5 95 % Note: without condensation. 3.4.2 Altitude The drive is not sensitive to changes in altitude because it has no moving parts. Drive tested within -1K and +40K feet. 3.4.3 Shock a
Résumé du contenu de la page N° 10
® ® In Inte tel l X18- X18-M/X25-M SA M/X25-M SAT TA A S SS SD D 3.4.5 Electromagnetic Immunity Electromagnetic Immunity tests assume the SSD is properly installed in the representative host system. The drive will operate properly without errors or degradation in performance when subjected to radio frequency (RF) environments defined in the following table: Table 10. Radio Frequency Specifications Performance Test Description Reference Standard Criteria Electrostatic discharge Contact, HCP,
Résumé du contenu de la page N° 11
® Intel X18-M/X25-M SATA SSD 3.5.2 Mean Time Between Failure The Mean Time Between Failure (MTBF) is calculated based on a Part Stress Analysis. It assumes nominal voltage, with all other parameters within specified range. 3.5.3 Power On/Off Cycles Defined as power being removed from the drive, and then restored. Most host systems remove power from the drive when entering suspend and hibernate as well as on a system shutdown. 3.5.4 Minimum Useful Life A typical client usage of 20 GB writes pe
Résumé du contenu de la page N° 12
® ® In Inte tel l X18- X18-M/X25-M SA M/X25-M SAT TA A S SS SD D Figure 2. Dimensions for Intel X18-M SATA SSD 1.8” 5 mm Form Factor Notes: 1. Connector Outline: The 1.8” Intel X18-M SATA SSD connector is compliant to the SATA Rev 2.6 specifications. 2. Connector Location: The 1.8” Intel X18-M SATA SSD connector is compliant to the micro SATA SFF-8144 specification. 3. All dimensions are in millimeters. ® Intel X18-M/X25-M SATA Solid State Drive Advance Product Manual July 2008 12 Order Number:
Résumé du contenu de la page N° 13
® Intel X18-M/X25-M SATA SSD 4.2 2.5” 7 mm Intel X25-M SATA SSD The following figure shows the physical package information for the 7 mm deep 2.5” Intel X25-M SATA SSD. Figure 3. Dimensions for Intel X25-M SATA SSD 2.5” 7 mm Form Factor Note: All dimensions are in millimeters. ® Intel X18-M/X25-M SATA Solid State Drive July 2008 Advance Product Manual Order Number: 319765-002US 13
Résumé du contenu de la page N° 14
® ® In Inte tel l X18- X18-M/X25-M SA M/X25-M SAT TA A S SS SD D 4.3 2.5” 9.5 mm Intel X25-M SATA SSD The following figure shows the physical package information for the 9.5 mm deep 2.5” Intel X25-M SATA SSD. Figure 4. Dimensions for Intel X25-M SATA SSD 2.5” 9.5 mm Form Factor Note: All dimensions are in millimeters. ® Intel X18-M/X25-M SATA Solid State Drive Advance Product Manual July 2008 14 Order Number: 319765-002US
Résumé du contenu de la page N° 15
® Intel X18-M/X25-M SATA SSD 5.0 Pin and Signal Descriptions This section identifies the pin locations and signal descriptions of the Intel X18-M/ X25-M SATA SSDs. 5.1 Pin Locations 5.1.1 1.8” Pin Locations Figure 5. Layout of Signal and Power Segment Pins Signal Segment S1 Power Segment P1 ® Intel X18-M/X25-M SATA Solid State Drive July 2008 Advance Product Manual Order Number: 319765-002US 15
Résumé du contenu de la page N° 16
® ® In Inte tel l X18- X18-M/X25-M SA M/X25-M SAT TA A S SS SD D 5.1.2 2.5” Pin Locations Figure 6. Layout of Signal and Power Segment Pins Signal Segment S1 Power Segment P1 5.2 Signal Description Table Table 12. Serial ATA Connector Pin Signal Definitions for 1.8” and 2.5” Form Factors Pin Function Definition S1 Ground 2nd mate S2 A+ Differential signal pair A S3 A- S4 Ground 2nd mate S5 B- Differential signal pair B S6 B+ S7 Ground 2nd mate Note: Key and spacing separate signal and power segm
Résumé du contenu de la page N° 17
® Intel X18-M/X25-M SATA SSD Table 13. Serial ATA Power Pin Definitions for 1.8” Form Factor (Continued) 1 Pin Function Definition Mating Order 4 P6 V 5 V Power. Not connected 2nd Mate 5 5 P7 DAS Device Activity Signal 2nd Mate Key Key NC NC 6 P8 Optional Manufacturing Test Pin 2nd Mate 6 P9 Optional Manufacturing Test Pin 2nd Mate Notes: 1. All mate sequences assume zero angular offset between connectors. 2. P1 and P2 are internally connected to one another within the device. 3. Ground connecto
Résumé du contenu de la page N° 18
® ® In Inte tel l X18- X18-M/X25-M SA M/X25-M SAT TA A S SS SD D 5.3 Hot Plug Support Hot Plug insertion and removal are supported in the presence of a proper connector and appropriate operating system (OS) support as described in the SATA 2.6 specification. This product supports Asynchronous Signal Recovery and will issue an unsolicited COMINIT when first mated with a powered connector to guarantee reliable detection by a host system without hardware device detection. 6.0 Command Sets 6.1 A
Résumé du contenu de la page N° 19
® Intel X18-M/X25-M SATA SSD 6.1.1.1 IDENTIFY DEVICE Data The following table details the sector data returned after issuing an IDENTIFY DEVICE command. Table 15. Returned Sector Data F = Fixed Word V = Variable Default Value Description X = Both 0 F 0040h General configuration bit-significant information 1 X 3FFFh Obsolete - Number of logical cylinders (16,383) 2 V C837h Specific configuration 3 X 0010h Obsolete - Number of logical heads (16) 4-5 X 0h Retired 6 X 003Fh Obsolete - Number of log
Résumé du contenu de la page N° 20
® ® In Inte tel l X18- X18-M/X25-M SA M/X25-M SAT TA A S SS SD D Table 15. Returned Sector Data (Continued) F = Fixed Word V = Variable Default Value Description X = Both 76 F 0106h Serial ATA capabilities 77 F 0h Reserved for future Serial ATA definition 78 F 0048h Serial ATA features supported 79 V 0040h Serial ATA features enabled 80 F 00FCh Major Version Number 81 F 001Ah Minor Version Number 82 F 746Bh Command set supported. 83 F 7C01h Command sets supported. 84 F 6163h Command set/feature
