Résumé du contenu de la page N° 1
®
Intel X18-M/X25-M SATA Solid State Drive
SSDSA1MH080G1, SSDSA2MH080G1, SSDSA1MH160G1, SSDSA2MH160G1
Product Manual
Available in 1.8” and 2.5” Form Factors Power Management
Capacity: 80 GB and 160 GB — 3.3 V (1.8”) or 5 V (2.5”) SATA Supply Rail
Uses Intel NAND flash memory Multi-Level Cell — SATA Interface Power Management
(MLC) components
— OS-Aware Hot Plug/Removal
Bandwidth Performance Specifications
Power Specifications
— Sustained Sequential Read: Up to 250 MB/s
— Active: 0.150 W TY
Résumé du contenu de la page N° 2
L Ordering Information Decoder Intel High Performance Solid State Drive Ordering Information MM Order Part Number Device Nomenclature Numbers Quantity 894401 80 GB SATA 1.8” 5 mm Drive, MLC, Production Sample 1 901461 80 GB SATA 1.8” 5 mm Drive, MLC, Production Sample 5 SSDSA1MH080G1 894400 80 GB SATA 1.8” 5 mm Drive, MLC, Production Sample 50 894103 80 GB SATA 2.5” 7 mm Drive, MLC, Production Sample 1 901460 80 GB SATA 2.5” 7 mm Drive, MLC, Production Sample 5 894125 80 GB SATA 2.5” 7 mm Drive,
Résumé du contenu de la page N° 3
® Intel X18-M/X25-M SATA SSD Contents 1.0 Introduction ..............................................................................................................5 1.1 Product Overview ................................................................................................5 1.2 Block Diagram ....................................................................................................6 1.3 Architecture..............................................................................
Résumé du contenu de la page N° 4
® Intel X18-M/X25-M SATA SSD 9.0 Revision History.......................................................................................................27 ® Intel X18-M/X25-M SATA Solid State Drive Product Manual February 2009 4 Order Number: 319765-006US
Résumé du contenu de la page N° 5
® Intel X18-M/X25-M SATA SSD 1.0 Introduction ® The Intel X18-M/X25-M SATA Solid State Drive (SSD) delivers leading performance in industry standard 1.8” and 2.5” form factors while simultaneously improving system responsiveness for mobile applications over standard rotating drive media or hard disk drives. By combining Intel’s leading NAND flash memory technology with our innovative high performance controller, Intel delivers an SSD for Native Serial Advanced Technology Attachment (SATA) h
Résumé du contenu de la page N° 6
® ® In Inte tel l X18- X18-M/X25-M SA M/X25-M SAT TA A S SS SD D 1.2 Block Diagram Figure 1. Block Diagram NAND Flash Memory Flash Channel 0 Memory Intel Flash Memory System NAND SATA Interface Channel ... Flash On A Chip Memory (SOC) NAND Flash Memory Flash Channel n Memory 1.3 Architecture The Intel X18-M/X25-M SATA SSDs utilize a cost effective System on a Chip (SOC) design to manage a full SATA 3 Gb/s bandwidth with the host while managing multiple flash memory devices on multiple channe
Résumé du contenu de la page N° 7
® Intel X18-M/X25-M SATA SSD Table 1. Device Certifications (Continued) Certification Description Compliance with paragraph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of MIC Certified the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea. Microsoft WHQL Microsoft Windows Hardware Quality Labs RoHS Compliant Restriction of Hazardous Substance Directive
Résumé du contenu de la page N° 8
® ® In Inte tel l X18- X18-M/X25-M SA M/X25-M SAT TA A S SS SD D Table 5. Latency Specifications Type Average Latency Read 85 µs (TYP) Write 115 µs (TYP) Power On to Ready 1 s Notes: 1. Write Cache Enabled. 2. Device measured using IOmeter. 3. Power On To Ready time assumes proper shutdown (power removal preceded by STANDBY command). 4. Read/Write latency measured on 4 K transfers. Table 6. Random Read/Write Input/Output Operations Per Second Access Type IOPS 4K Read 35,000 4K Write 3,300 Notes:
Résumé du contenu de la page N° 9
® Intel X18-M/X25-M SATA SSD 3.4 Environmental Conditions 3.4.1 Temperature Table 9. Temperature Related Specifications Mode Min Typ Max Unit o Operating 0 70 C Ambient Temperature o Non-Operating -55 95 C o Operating 20 C/hr * Temperature Gradient o Non-Operating 30 C/hr * Operating 5 95 % Humidity Non-Operating 5 95 % Note: Measured without condensation. 3.4.2 Altitude The drive is not sensitive to changes in altitude because it has no moving parts. Drive tested within -1K and +40K feet. 3.4.
Résumé du contenu de la page N° 10
® ® In Inte tel l X18- X18-M/X25-M SA M/X25-M SAT TA A S SS SD D 3.4.5 Electromagnetic Immunity Electromagnetic Immunity tests assume the SSD is properly installed in the representative host system. The drive will operate properly without errors or degradation in performance when subjected to radio frequency (RF) environments defined in the following table: Table 11. Radio Frequency Specifications Performance Test Description Reference Standard Criteria Electrostatic discharge Contact, HCP,
Résumé du contenu de la page N° 11
® Intel X18-M/X25-M SATA SSD 3.5.2 Mean Time Between Failure The Mean Time Between Failure (MTBF) is calculated based on a Part Stress Analysis. It assumes nominal voltage, with all other parameters within specified range. 3.5.3 Power On/Off Cycles Defined as power being removed from the drive, and then restored. Most host systems remove power from the drive when entering suspend and hibernate as well as on a system shutdown. 3.5.4 Minimum Useful Life A typical client usage of 20 GB writes pe
Résumé du contenu de la page N° 12
® ® In Inte tel l X18- X18-M/X25-M SA M/X25-M SAT TA A S SS SD D Figure 2. Dimensions for Intel X18-M SATA SSD 1.8” 5 mm Form Factor Notes: 1. Connector Outline: The 1.8” Intel X18-M SATA SSD connector is compliant to the SATA Rev 2.6 specifications. 2. Connector Location: The 1.8” Intel X18-M SATA SSD connector is compliant to the micro SATA SFF-8144 specification. 3. All dimensions are in millimeters. ® Intel X18-M/X25-M SATA Solid State Drive Product Manual February 2009 12 Order Number: 3197
Résumé du contenu de la page N° 13
® Intel X18-M/X25-M SATA SSD 4.2 1.8” 8 mm Intel X18-M SATA SSD The following figure shows the physical package information for the 8 mm deep 1.8” Intel X18-M SATA SSD. Figure 3. Dimensions for Intel X18-M SATA SSD 1.8” 8 mm Form Factor Note: All dimensions are in millimeters. ® Intel X18-M/X25-M SATA Solid State Drive February 2009 Product Manual Order Number: 319765-006US 13
Résumé du contenu de la page N° 14
® ® In Inte tel l X18- X18-M/X25-M SA M/X25-M SAT TA A S SS SD D 4.3 2.5” 7 mm Intel X25-M SATA SSD The following figure shows the physical package information for the 7 mm deep 2.5” Intel X25-M SATA SSD. Figure 4. Dimensions for Intel X25-M SATA SSD 2.5” 7 mm Form Factor Note: All dimensions are in millimeters. ® Intel X18-M/X25-M SATA Solid State Drive Product Manual February 2009 14 Order Number: 319765-006US
Résumé du contenu de la page N° 15
® Intel X18-M/X25-M SATA SSD 4.4 2.5” 9.5 mm Intel X25-M SATA SSD The following figure shows the physical package information for the 9.5 mm deep 2.5” Intel X25-M SATA SSD. Figure 5. Dimensions for Intel X25-M SATA SSD 2.5” 9.5 mm Form Factor Note: All dimensions are in millimeters. ® Intel X18-M/X25-M SATA Solid State Drive February 2009 Product Manual Order Number: 319765-006US 15
Résumé du contenu de la page N° 16
® ® In Inte tel l X18- X18-M/X25-M SA M/X25-M SAT TA A S SS SD D 5.0 Pin and Signal Descriptions This section identifies the pin locations and signal descriptions of the Intel X18-M/ X25-M SATA SSDs. 5.1 Pin Locations 5.1.1 1.8” Pin Locations Figure 6. Layout of Signal and Power Segment Pins Signal Segment S1 Power Segment P1 ® Intel X18-M/X25-M SATA Solid State Drive Product Manual February 2009 16 Order Number: 319765-006US
Résumé du contenu de la page N° 17
® Intel X18-M/X25-M SATA SSD 5.1.2 2.5” Pin Locations Figure 7. Layout of Signal and Power Segment Pins Signal Segment S1 Power Segment P1 5.2 Signal Description Table Table 13. Serial ATA Connector Pin Signal Definitions for 1.8” and 2.5” Form Factors Pin Function Definition S1 Ground 2nd mate S2 A+ Differential signal pair A S3 A- S4 Ground 2nd mate S5 B- Differential signal pair B S6 B+ S7 Ground 2nd mate Note: Key and spacing separate signal and power segments. Table 14. Serial ATA Power Pin
Résumé du contenu de la page N° 18
® ® In Inte tel l X18- X18-M/X25-M SA M/X25-M SAT TA A S SS SD D Table 14. Serial ATA Power Pin Definitions for 1.8” Form Factor (Continued) 1 Pin Function Definition Mating Order 4 P6 V 5 V Power. Not connected 2nd Mate 5 5 P7 DAS Device Activity Signal 2nd Mate Key Key NC NC 6 P8 Optional Manufacturing Test Pin 2nd Mate 6 P9 Optional Manufacturing Test Pin 2nd Mate Notes: 1. All mate sequences assume zero angular offset between connectors. 2. P1 and P2 are internally connected to one another w
Résumé du contenu de la page N° 19
® Intel X18-M/X25-M SATA SSD 5.3 Hot Plug Support Hot Plug insertion and removal are supported in the presence of a proper connector and appropriate operating system (OS) support as described in the SATA 2.6 specification. This product supports Asynchronous Signal Recovery and will issue an unsolicited COMINIT when first mated with a powered connector to guarantee reliable detection by a host system without hardware device detection. 6.0 Command Sets 6.1 ATA Commands The Intel X18-M/X25-M SA
Résumé du contenu de la page N° 20
® ® In Inte tel l X18- X18-M/X25-M SA M/X25-M SAT TA A S SS SD D 6.1.1.1 IDENTIFY DEVICE Data The following table details the sector data returned after issuing an IDENTIFY DEVICE command. Table 16. Returned Sector Data F = Fixed Word V = Variable Default Value Description X = Both 0 F 0040h General configuration bit-significant information 1 X 3FFFh Obsolete - Number of logical cylinders (16,383) 2 V C837h Specific configuration 3 X 0010h Obsolete - Number of logical heads (16) 4-5 X 0h Retire
