Résumé du contenu de la page N° 1
Dell™ PowerVault™
600 Systems
Getting Started
With Your System
Guide de mise en route
Primeiros passos com o sistema
Procedimientos iniciales con el sistema
Model MVT01
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
Dell™ PowerVault™ 600 Systems Getting Started With Your System Model MVT01
Résumé du contenu de la page N° 4
Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. ____________________ Information in this document is subject to change without notice. © 2007 Dell Inc. All rights reserved. Reproduction in any manner whatsoever
Résumé du contenu de la page N° 5
Contents System Features . . . . . . . . . . . . . . . . . . . . . . 5 Supported Operating Systems . . . . . . . . . . . . . . . 7 Other Information You May Need . . . . . . . . . . . . . 7 Obtaining Technical Assistance . . . . . . . . . . . . . 7 Installation and Configuration. . . . . . . . . . . . . . . 8 Unpacking the System . . . . . . . . . . . . . . . . 8 Installing the Rails and System in a Rack . . . . . . 9 Connecting the Keyboard, Mouse, and Monitor . . 10 Connecting the Power . . .
Résumé du contenu de la page N° 6
4 Contents
Résumé du contenu de la page N° 7
System Features The major hardware and software features of your system include: ® ® One or two Dual-Core Intel Xeon Processors 5000 Sequence. Support for symmetric multiprocessing (SMP), which is available on systems with two Intel Xeon processors. SMP greatly improves overall system performance by dividing processor operations between independent processors. To take advantage of this feature, you must use an operating system that supports multiprocessing. NOTE: If you decide to upgrad
Résumé du contenu de la page N° 8
The system board includes the following features: Six PCI slots located in an expansion-card cage. Slots 1 and 2 are 3.3-V, 64-bit, 133-MHz PCI-X slots; slot 3 is a 3.3-V, PCIe x8 lane; slots 4 through 6 are 3.3-V, PCIe x4 lanes. Expansion-card slots accommodate full-height, full-length expansion cards. PCIe slots accommodate up to x8 expansion cards. Dedicated PCI slot for an integrated SAS host bus adapter or an optional integrated RAID controller card with 256 MB of cache memory and
Résumé du contenu de la page N° 9
Front-panel connectors include a video and two USB connectors. Front-panel 1x5 LCD for system ID and error messaging. System ID button on the front and back panels. For more information about specific features, see "Technical Specifications" on page 12. Supported Operating Systems ® Microsoft Windows Storage Server™ 2003 R2 Express Edition (x64) Microsoft Windows Storage Server 2003 R2 Workgroup Edition (x64) Other Information You May Need CAUTION: The Product Information Guide p
Résumé du contenu de la page N° 10
Installation and Configuration CAUTION: Before performing the following procedure, read and follow the safety instructions and important regulatory information in your Product Information Guide. This section describes the steps to set up your system for the first time. The illustrations that follow show a rack-mounted system, but the installation procedure applies in large part to a stand-alone tower system. In place of the rack installation in step 2, refer to the documentation included w
Résumé du contenu de la page N° 11
Installing the Rails and System in a Rack Once you have read the "Safety Instructions" located in the rack installation documentation for your system, install the rails and the system in the rack. See your rack installation documentation for instructions on installing your system in a rack. For a tower system, see the documentation included with your system on installing the system stabilizer feet. Getting Started With Your System 9
Résumé du contenu de la page N° 12
Connecting the Keyboard, Mouse, and Monitor Connect the keyboard, mouse, and monitor (optional). The connectors on the back of your system have icons indicating which cable to plug into each connector. Be sure to tighten the screws (if any) on the monitor's cable connector. Connecting the Power Connect the system’s power cable(s) to the system. Plug the other end of the cable into a grounded electrical outlet or a separate power source such as an uninterrupted power supply (UPS) or a pow
Résumé du contenu de la page N° 13
Installing the Power Cord Retention Bracket Attach the power cord retention bracket on the right bend of the power supply handle. Bend the system power cable into a loop as shown in the illustration and attach to the bracket’s cable clasp. Repeat the procedure for the second power supply. Turning on the System Turn on the system and monitor (optional). Press the power button on the system and the monitor. The power indicators should light. Adjust the monitor’s controls until the displayed
Résumé du contenu de la page N° 14
Installing the Bezel Install the bezel (optional). Complete the 0perating System Setup If you purchased a preinstalled operating system, see the operating system documentation that ships with your system. To install an operating system for the first time, see the Quick Installation Guide. Be sure the operating system is installed before installing hardware or software not purchased with the system. Technical Specifications Processor Processor type One or two Dual-Core Intel Xeon Processors
Résumé du contenu de la page N° 15
Memory Architecture 533 or 667 MHz (when available) Fully Buffered DIMMs (FBD) Memory module sockets twelve 240-pin Memory module capacities 256 MB, 512 MB, 1 GB, 2 GB, or 4 GB Minimum RAM 512 MB (two 256-MB module) Maximum RAM 48 GB Drives Hard drives up to ten 3.5-inch, internal, hot-plug SAS or SATA eight drives in the internal drive bay two drives in the optional 1x2 flexbay backplane expansion Diskette drive one optional 3.5-inch, 1.44-MB external optional USB 3.5-inch, 1.44-MB Optic
Résumé du contenu de la page N° 16
Connectors (continued) Front Video 15-pin VGA USB Two 4-pin, USB 2.0-compliant Video Video type ATI ES1000 video controller; VGA connectors Video memory 16 MB of DDR SDRAM Power AC power supply (per power supply) Wattage 930 W Voltage 90–264 VAC, autoranging, 47–63 Hz Heat dissipation 2697 BTU/hr maximum Maximum inrush current Under typical line conditions and over the entire system ambient operating range, the inrush current may reach 55 A per power supply for 10 ms or less Batteries System
Résumé du contenu de la page N° 17
Physical (continued) Tower (without bezel) Height 47.89 cm (18.85 in) with feet, no casters Width 22.66 cm (8.92 in) Depth 66.13 cm (26.04 in) does not include control panel or bezel; control panel adds an additional 1.3 cm (.51 in) Weight (maximum 49.9 kg (110 lb) configuration) Environmental NOTE: For additional information about environmental measurements for specific system configurations, contact your technical support provider. Temperature Operating 10° to 35°C (50° to 95°F) Storage –40°
Résumé du contenu de la page N° 18
16 Getting Started With Your System
Résumé du contenu de la page N° 19
Index C P combination CD-RW/DVD, 5 processors, 5 E R expansion-card cage, 6 remote access controller remote systems management, 6 remote access controller card, 6 I remote systems management installation and configuration, 8 remote access controller card, 6 integrated RAID controller, 6 S M supported Operating Systems, 7 memory, 5 symmetric multiprocessing interleaving, 5 (SMP), 5 system features, 5 CD drive, 5 N diskette drive, 5 DVD drive, 5 NICs, 6 memory, 5 NICs, 6 power supply, 5 processor
Résumé du contenu de la page N° 20
system features (continued) remote access controller card, 6 symmetric multiprocessing (SMP), 5 USB, 6 video controller, 6 T technical assistance, 7 technical specifications, 12 V video controller, 6 18 Index
