Instruction d'utilisation Cables to Go 29347

Résumé du contenu de la page N° 1

4-Port USB SuperBooster
Receiver Dongle




Part #29347


User Manual

Résumé du contenu de la page N° 2

Introduction Thank you for purchasing the USB SuperBooster Receiver Dongle. The USB SuperBooster Receiver Dongle is one component of a complete solution that, when paired with a transmitter (sold separately) allows you to conquer USB length limitations and put your USB devices where you need them. This wall plate solution extends the distance of a USB device to a host computer up to 150ft so you can place your USB projector, camera, printer, or other USB device exactly where you want it

Résumé du contenu de la page N° 3

Features • Extends the distance of a USB device from a USB-enabled computer up to 150ft • One part of a total solution- transmitter is purchased separately giving you the flexibility to customize the configuration to your specific needs • Transmitter options include a wall plate (part #29344) or a dongle (part #29348) • Ideal for use with USB projectors, interactive whiteboards, cameras, printers, web cams, hubs, and other USB devices • Bus-powered so no external power source is requi

Résumé du contenu de la page N° 4

Installing your USB SuperBooster Dongle The USB SuperBooster solution has a transmitter unit (sold separately) and a receiver unit. Make certain you install the transmitter unit at your computer or source side. The receiver unit needs to be installed on the device side. 1) Install the Transmitter Wall Plate in a standard J-box where you want your source/computer or connect the Transmitter Dongle to your computer 2) Connect the Receiver Dongle to your device using a standard A/B USB C

Résumé du contenu de la page N° 5

Termination Chart Pin Number Network (Cat5/5E/6) Conductor Color 1 white/orange 2 orange 3 White/green 4 Blue 5 White/blue 6 Green 7 White/brown 8 brown Application Diagram Transmitter Receiver 3555 Kettering Blvd. Moraine, Ohio 45439 1-800-293-4970 www.cablestogo.com 1