Instruction d'utilisation Apple SCSI Hard Drive

Résumé du contenu de la page N° 1

Power Mac G4 / Macintosh Server G4
SCSI Hard Drive
Replacement Instructions
Be sure to follow the instructions in this sheet carefully. Failure to follow these instructions
could result in damage to your equipment and may void your warranty.
Note: Written and video instructions covering customer-installable parts are available at
http://www.info.apple.com/installparts/.
Tools Required
• Phillips screwdriver
• Flat-blade screwdriver
Backing Up Your Data
Warning: Before repla

Résumé du contenu de la page N° 2

Important: To avoid electrostatic discharge, always ground yourself by touching the port access covers before you touch any parts or install any components inside the computer. To avoid static electricity building back up in your body, do not walk around the room until you have completed your installation and closed the computer. 7. Unplug the power cord. 8. Lift the latch on the right side access panel. (Figure 1B) 9. Gently lower the access panel until it lies flat. T

Résumé du contenu de la page N° 3

Closing the Computer 1. Raise the side access panel, lift the latch, and press the panel against the case until it snaps securely into place. 2. Reconnect all cables. 3. Restart your computer and restore the data from your backup to the new drive. Warning: Never turn on your computer unless all of its internal and external parts are in place and it is closed. Operating the computer when it is open or missing parts can damage your computer or cause injury. Apple Computer, Inc. © 20

Résumé du contenu de la page N° 4

1 B A 2 Power Mac G4 SCSI Hard Drive - 4

Résumé du contenu de la page N° 5

3 B A C 4 Power Mac G4 SCSI Hard Drive - 5

Résumé du contenu de la page N° 6

5 Power Mac G4 SCSI Hard Drive - 6