Instruction d'utilisation Avenview SPLIT-DVI Series SPLIT-DVI-2

Résumé du contenu de la page N° 1

2 Port DVI Splitter









Model #: SPLIT-DVI-2






© 2010 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied

Résumé du contenu de la page N° 2

Table of Contents Section 1: Getting Started ...................................................................................................................... 3 1.1 Important Safeguards ............................................................................................................ 3 1.2 Safety Instructions ................................................................................................................. 3 1.3 Regulatory Notices Federal Communications Commi

Résumé du contenu de la page N° 3

Section 1: Getting Started 1.1 Important Safeguards Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover  Any product, on which the serial number has been defaced, modified or removed.  Damage, deterioration or malfunction resulting from:  Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions suppl

Résumé du contenu de la page N° 4

1.3 Regulatory Notices Federal Communications Commission (FCC) This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. 1.4 Introduction Avenview SPLIT-DVI-2 Distribution System lets your one digital video signal (Set-Top boxes, DVD P

Résumé du contenu de la page N° 5

1.6 Before Installation  Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.  Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.  Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.  Do not twist or pull by force ends of the optical cable. It can cause malfunction. www.avenview.com 5

Résumé du contenu de la page N° 6

1.7 Installation The installation of SPLIT-DVI-2 is simple: 1. Power off display source such as DVD Player, Set-top box 2. Connect the DVI cable into each display source and display 3. Connect DVI cable which is attached to display source into SPLIT-DVI-2 4. Connect Power to SPLIT-DVI-2 5. For HDTV Signal select HDTV from Function Switch and for PC Signal select PC www.avenview.com 6

Résumé du contenu de la page N° 7

Section 2: Specifications Item Description Units SPLIT-DVI-2 Unit Description 2 Port DVI Splitter DVI Version 1.0 HDCP Compliance 1.1 Clock Frequency 25MHz – 225 MHz Supported Resolution & Up to WUXGA 1920 x 1200 Distance DVI Connector 29 pin DVI-D Plug Dimensions (L x W x H) 3.7” x 6.9” x 1” 5V 2A DC Power Supply 3W (max) Power Consumption Environmental Operating Temperature 32˚ ~ 104˚F (0˚ to 40˚C) Storage Temperature -4˚ ~ 140˚F (-20˚ ~ 60˚C) Relative Humidity 20~90% RH (no

Résumé du contenu de la page N° 8

2.1 Connector Pin Assignment TRANSMITTER Pin Signal Assignment Pin Signal Assignment Pin Signal Assignment 1 T.M.D.S. Data2- 9 T.M.D.S. Data1- 17 T.M.D.S. Data0- 2 T.M.D.S. Data2+ 10 T.M.D.S. Data1+ 18 T.M.D.S. Data0+ 3 T.M.D.S. Data2 Shield 11 T.M.D.S. Data1 Shield 19 T.M.D.S. Data0 Shield 4 No Connect 12 No Connect 20 No Connect 5 No Connect 13 No Connect 21 No Connect 6 SCL 14 +5V Power 22 T.M.D.S. Clock Shield 7 SDA 15 Ground 23 T.M.D.S. Clock+ 8 No Connect 16 Hot Plug Detect 24

Résumé du contenu de la page N° 9

Disclaimer While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of anticipatory profits, or for punitive, incidental or consequential damages