Résumé du contenu de la page N° 1
INSTRUCTION MANUAL
COOL/DRY/HEAT Model
Split System Air Conditioner KHS0951
KHS1251
KHS1852
Save These Instructions!
Pub. OI-85264180351004 ©SANYO 2002 Printed on Recycled Paper
Résumé du contenu de la page N° 2
Features This air conditioner is equipped with cooling, heating and drying functions. Details on these functions are provided below; refer to these descriptions when using the air conditioner. • • Microprocessor Controlled Operation Air Sweep Control The interior compartment of the remote This function moves a flap up and down in the control unit contains several features to air outlet, directing air in a sweeping motion facilitate automatic operation, easy logically around the room and providin
Résumé du contenu de la page N° 3
Contents Page Features .................................................................................................................. 2 Product Information .............................................................................................. 3 Alert Symbols ........................................................................................................ 3 Installation Location .............................................................................................. 4 Ele
Résumé du contenu de la page N° 4
Installation Location • We recommend that this air conditioner be installed properly by qualified installation technicians in accordance with the Installation Instructions provided with the unit. • Before installation, check that the voltage of the electric supply in your home or office is the same as the voltage shown on the nameplate. • Do not install this air conditioner where there are fumes or flammable gases, or in an extremely humid space such as a greenhouse. • Do not install the air con
Résumé du contenu de la page N° 5
Names of Parts INDOOR UNIT Air intakes Air outlet Remote control unit Drain hose Refrigerant tubes OUTDOOR UNIT Air outlet This illustration is based on the external appearance of a standard model. NOTE Consequently, the shape may differ from that of the air conditioner which you have selected. This air conditioner consists of an indoor unit and an outdoor unit. You can control the air conditioner with the remote control unit. Air Intakes Air from the room is drawn into these sections and passes
Résumé du contenu de la page N° 6
Unit Display and Operation Selector Operation selector INDOOR UNIT INDOOR UNIT KHS1852 KHS0951 KHS1251 ON ON OFF TEST OFF TEST Operation selector OPERATION lamp TIMER lamp Remote control receiver OPERATION STANDBY TIMER Remote control receiver STANDBY lamp OPERATION TIMER STANDBY IMPORTANT Avoid using radio equipment such as mobile phones near (within 4 ft. of) the indoor unit. Some radio STANDBY lamp equipment may cause the unit to malfunction. TIMER lamp OPERATION lamp If the trouble occurs,
Résumé du contenu de la page N° 7
Remote Control Unit (Display) “ROOM TEMP” is displayed when the temperature setting has not been made. Displayed when main unit sensor is in use “TEMP” is displayed when setting temperature. Displayed when transmitting data Displayed when temperature is shown Displayed when the temperature setting is at the upper or lower allowable limit Displayed when setting timer Symbols (1) Operation mode (3) Temperature setting 60 – 86 °F When set to 82 °F ........... AUTO..............................
Résumé du contenu de la page N° 8
Remote Control Unit Sensor Transmitter Display (Cover closed) NIGHT SETBACK button ON/OFF operation button 1 HR. TIMER button Temperature setting buttons MODE selector button FAN SPEED selector button FLAP button TIMER SELECT button TIMER AND PRESENT TIME setting buttons PROGRAM button ADDRESS switch ACL button SENSOR button Battery compartment (Pull off the cover to expose the batteries.) NOTE The illustration above pictures the remote control unit after the cover has been lowered and removed.
Résumé du contenu de la page N° 9
Remote Control Unit (continued) Program button For details, see “Setting the Timer” . Press this button to select the mode you want to program. TIMER SELECT button No display : The timer does not operate. : The air conditioner stops at the set time. : The air conditioner starts at the set time. : The air conditioner stops and starts, or starts and stops, at the set times every day. MODE selector button Use this button to select the AUTO, HEAT, DRY or COOL mode. (AUTO) : When this setting is sele
Résumé du contenu de la page N° 10
Using the Remote Control Unit How to Install Batteries 1. Slide the cover in the direction indicated by the arrow and remove it. 2. Install two AAA alkaline batteries. Make sure the batteries point in the direction marked in the battery compartment. 3. Use a thin object such as the tip of a pen to press the ACL button. ACL button • The batteries last about six months, depending on how much you use NOTE the remote control unit. Replace the batteries when the remote control unit's display fails to
Résumé du contenu de la page N° 11
Using the Remote Control Unit (continued) Mounting the Remote Control Unit Truss-head tapping screws 5/32 x 5/8 “ (4 x 16 mm) (supplied) Press Remote control unit holder Hook When attaching to wall 1) Confirm the indoor unit beeps when the ON/OFF button is pressed at the wall location where the remote control unit is to be attached, then attach the holder to the wall. 2) When taking out the remote control unit, pull it from the holder. • Point the transmitter on the remote control unit at the se
Résumé du contenu de la page N° 12
Operation with the Remote Control Unit 1. Automatic Operation STEP 2 STEP 1 Check that the circuit breaker on the power panel is turned on and that the NOTE operation selector of the indoor unit is in the ON position. Once the mode is selected and the unit is preset by following the steps below, you can have the air conditioner automatically bring the room to the desired temperature simply by pressing the ON/OFF operation button. STEP 1 Press the MODE selector to select . STEP 2 Press the ON/OFF
Résumé du contenu de la page N° 13
Operation with the Remote Control Unit (continued) Press TEMP. to change the temperature setting. Press the upper TEMP. button to raise the temperature setting Press the lower TEMP. button to lower the temperature setting • Although the fan speed is set automatically, you can change the fan speed by pressing the FAN SPEED selector button. To stop the air conditioner, press the ON/OFF operation button again. OI-351-13EG 13 oi202000
Résumé du contenu de la page N° 14
Operation with the Remote Control Unit (continued) 2. Manual Operation STEP 2 STEP 3 STEP 1 STEP 4 STEP 5 Check that the circuit breaker on the power panel is turned on and that the NOTE operation selector of the indoor unit is in the ON position. If the automatic operation settings of the unit do not meet your needs, press the setting buttons as described below and change the settings as desired. STEP 1 Press the MODE selector button and select the desired mode. For heating operation → For dehu
Résumé du contenu de la page N° 15
Operation with the Remote Control Unit (continued) • This appliance has a built-in 3-minute time delay circuit to ensure NOTE reliable operation. When the operation button is pressed, the compressor will start running within three minutes. In the event of power failure, the unit will stop. When the power is restored, the unit will restart automatically after five minutes. 3. Adjusting the Fan Speed A. Automatic Simply set the FAN SPEED selector button to the position. A microcomputer in the air
Résumé du contenu de la page N° 16
Operation with the Remote Control Unit (continued) 4. Night Setback Mode The Night Setback Mode is used for saving energy. Press the NIGHT SETBACK button while the air conditioner is operating. The mark appears in the display. To cancel the night setback function, press the NIGHT SETBACK button again. 16 OI-351-16EG oi202000
Résumé du contenu de la page N° 17
Operation with the Remote Control Unit (continued) A. In Cooling and DRY When the night setback mode is selected, the air conditioner Mode: automatically raises the temperature setting 2 ° F when 30 minutes ( and ) have passed after the selection was made, and then another 2 ° F after another 30 minutes have passed, regardless of the indoor temperature when night setback was selected. This enables you to save energy without sacrificing comfort. This function is convenient when gentle cooling is
Résumé du contenu de la page N° 18
Special Remarks ``DRY'' ( ) Operation • How it works? Once the room temperature reaches the level that was set, the unit repeats the cycle of turning on and off automatically. • During DRY operation, the fan speed is automatically set to LOW or VERY LOW; the fan speed then switches back and forth between LOW (for 20 seconds) and VERY LOW (for 10 seconds). • “DRY” operation is not possible if the indoor temperature is 59°For less. Heating ( ) Operation • Heating performance Because this air condi
Résumé du contenu de la page N° 19
Setting the Timer 3 4 2 1 1. How to set the (Example) To set to 9:10 pm. present time Operation Indication 1. Press the Program button ( ) The time indication alone blinks. three times. 2. • Press the HH button until PM 9 is The display will automatically displayed. stop blinking except for the “:” symbol after 10 sec. • Press the MM button until 10 is displayed. (Example) To stop the air conditioner at 11:30 pm. 2. How to set the OFF time 1. Press the Program button ( ) The timer indication bl
Résumé du contenu de la page N° 20
Setting the Timer (continued) (Example) To start operation at 7:10 am. 3. How to set the ON time Operation Indication 1. Press the Program button ( ) The timer indication blinks twice. and present ON time is shown. • 2. Press the HH button until AM 7 is The display will change displayed. automatically back to show the present time after 10 sec. • Press the MM button until 10 is displayed. 3. Press the ON/OFF button to start the The present time is displayed. air conditioner. 4. Press the TIMER
