Résumé du contenu de la page N° 1
READ AND SAVE THESE INSTRUCTIONS
WARNING: A risk of fire and electrical shock exists in all
electrical appliances and may cause personal injury or death.
Please follow all safety instructions.
Hot Beverage Machine
USE AND CARE GUIDE FOR
MODELS MECM1 AND MECM1CAN
Résumé du contenu de la page N° 2
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: • Read all instructions before using appliance. • Do not touch hot surfaces. Use handles or knobs. • Do not immerse cord, plug or coffee-making unit in water or other liquid. See instructions for cleaning. • This appliance is not for use by children. • Close supervision is necessary when any appliance
Résumé du contenu de la page N° 3
SAVE THESE INSTRUCTIONS THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY CAUTION: A short power supply cord is provided to reduce the risk of personal injury resulting from becoming entangled in or tripping over a longer cord. Extension cords are available from local hardware stores and may be used if care is exercised in their use. If an extension cord is required, special care and caution is necessary. Also the cord must be: (1) marked with an electrical rating of 125 V, and at least 13 A, 1625 W, an
Résumé du contenu de la page N° 4
FIGURE 1 N A M L B C D E F G K H J I FIGURE 2 A B C D E F G Milk pitcher Features Frothed milk spout H Drip grid with drip tray Figure 1 Figure 2 I Base A Water tank lid A Froth regulator J Carafe base B On/off switch with LED B Suction piece K Thermal Carafe light C Connector L Swing-out filter C Water tank with cup D Milk discharge outlet M Removable filter liner markings E Flexible hose N Button for opening the D Steam selector (“OFF” F Descaling hose swing-out filter position) E Steam nozzle
Résumé du contenu de la page N° 5
FIGURE 3 FIGURE 4 FIGURE 5 FIGURE 6 FIGURE 7 FIGURE 8 A B C D FIGURE 9 FIGURE 10 FIGURE 11 FIGURE 12 5
Résumé du contenu de la page N° 6
® Congratulations on the purchase of your new Melitta Choco Latte Hot Beverage machine. You have purchased an innovative and reliable appliance which we hope will give you years of enjoyment. As with every technical appliance, there are some fundamental aspects of this machine which should be observed. Please read the operating instructions carefully and keep them in a safe place. Above all, please pay attention to all safety instructions and warnings. Cord Compartment (Figure 3) Your machine h
Résumé du contenu de la page N° 7
3. Fill with ground coffee (Figure 6). The amount of ground coffee to be used is a matter of taste. One measuring spoonful (approx. 6-7g/2 TBS) is recommended per cup for medium strength coffee. Swing back the filter until it clicks into position. Ensure that the filter liner is properly seated (Figure 7). 4. Screw lid clockwise onto the thermal carafe and place on the carafe base. The lid must always be screwed onto the carafe because it activates the anti-drip valve (Figure 8). Although closed
Résumé du contenu de la page N° 8
Assemble the frothed milk spout as follows (Figure 10): 1. Insert the froth regulator (Figure 2/A) into the suction piece (Figure 2/B) and press it on firmly until froth regulator sits directly on top of suction piece. 2. Push the suction piece into the connector (Figure 2/C) and place the milk discharge outlet (Figure 2/D) onto the connector. 3. Firmly attach the complete frothed milk spout to the steam nozzle (Figure 1/E) until the red seal of the steam nozzle is no longer visible. 4. Leave t
Résumé du contenu de la page N° 9
10.After making the frothed milk, turn the steam selector to the off position. 11. You can froth as much milk as often as you like provided that there is enough excess water in the water tank. If necessary, simply add more water. Caution: For frothing, do not fill the water tank above the top of the “well” at base of water tank, otherwise the water flows into the coffee brewing system. Experiment to determine your preferences: first coffee, then adding frothed milk, or first frothed milk then ad
Résumé du contenu de la page N° 10
Descaling your machine Fill the water tank with water and then add the descaling agent in that order. Swing the swing-out filter back into the appliance. Place the carafe (with lid tightly screwed) onto the base (Figure 1/J). Please note that the lid serves to open the anti-drip valve, and is required to ensure that the water flows through correctly. Allow the descaling solution to take effect for about 15 minutes, then switch on the machine and allow the descaling solution to run through. Empty
Résumé du contenu de la page N° 11
- Press the froth regulator firmly onto the suction piece and check the position of it (horizontal position for maximum amount of froth). - Too little or no milk in the pitcher. - The flexible hose in the milk carton does not reach far enough into the milk. - Steam nozzle or frothed milk spout requires cleaning. • the volume of milk froth is too low or frothing takes too long: - Clean the frothed milk spout. - Clean the steam nozzle. - Descale the machine - Use skim or 1% milk. • no steam is pro
Résumé du contenu de la page N° 12
IMPORTANT NOTICE If any parts are missing or defective, DO NOT return this product. Please call our Customer Service Department for assistance. 800-233-9054 Monday - Friday 9:00 am - 5:00 pm CST Thank You 12
Résumé du contenu de la page N° 13
LIMITED ONE YEAR WARRANTY Warranty: This Melitta product is warranted by Salton, Inc. to be free from defects in materials or workmanship for a period of (1) year from the original purchase date. This product warranty covers only the original consumer purchaser of the product. Warranty Coverage: This warranty is void if the product has been damaged by accident in shipment, unreasonable use, misuse, neglect, improper service, commercial use, repairs by unauthorized personnel, normal wear and tea
Résumé du contenu de la page N° 14
Risk During Shipment: We cannot assume responsibility for loss or damage during incoming shipment. For your protection, carefully package the product for shipment and insure it with the carrier. Be sure to enclose the following items with your appliance: any accessories related to your problem, your full return address and daytime phone number, a note describing the problem you experienced, a copy of your sales receipt or other proof of purchase to determine warranty status. C.O.D. shipments
