Résumé du contenu de la page N° 1
IMPRESSA S90/S95/S9
IMPRESSA X90/X95
IMPRESSA 601
Instructions for use
12/2001
Art. Nr. 61956
Résumé du contenu de la page N° 2
Jura Impressa S90/S95/S9 – X90/X95 – 601 English ............................................................................................................. 7 – 22 Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. Jura Elektroapparate AG, CH-4626 Niederbuchsiten, = Note = Important = Tip Internet http://www.juraworld.com
Résumé du contenu de la page N° 3
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 6 Fig. 7 Fig. 5 Fig. 8 Fig. 9 Fig. 10 A 2 1 3 B
Résumé du contenu de la page N° 4
12 14 15 16 13 D E 17 11 C F 18 10 19 9 B G 8 20 7 21 6 A H 22 5 4 3 23 2 1
Résumé du contenu de la page N° 5
Instructions for use 1 Drip tray / residual water container 2 Drip tray cover 3 Cover for programming keys 4 Coffee key for 2 large cups 5 Coffee key for 1 large cup 6 Coffee key for 2 small cups 7 Coffee key for 1 small cup 8 Key for special coffee 9 ON/OFF switch 10 Rinsing key 11 Display dialogue system 12 Water tank with carrying handle 13 Cover for bean container and aroma protection lid 14 Cover for pre-ground coffee filler funnel 15 Height-adjustable coffee-spout 16 Cup warming tray 17
Résumé du contenu de la page N° 6
13.1 Programming powder quantity...................page 13 Table of contents 13.2 Programming coffee temperature...............page 13 Jura Impressa 13.3 Programming water quantity.....................page 13 1. Description ......................................................page 7 13.4 Programming steam portion ......................page 13 2. Safety instructions............................................page 7 13.5 Programming tea portion..........................page 13 2.1 Warnings ......
Résumé du contenu de la page N° 7
Important information for the user 2. Safety instructions Thank you for choosing this Jura product. 2.1 Warnings Please study these instructions carefully before using your new Children are unaware of the dangers that electrical machines re- present. Therefore children should never be left unsupervised machine and keep them in a safe place for easy reference in the around electrical machines. future. This machine should only be used by people who have read and Should you require further info
Résumé du contenu de la page N° 8
If using acidic decalcifying agents be sure to immediately re- You have the following possibilities: move any splashes and drops from delicate surfaces, especially the smaller the dots, the finer the grinding natural stone and wooden surfaces, or take corresponding pre- the bigger the dots, the coarser the grinding cautions. The grinding grade should only be adjusted while the grinder 3. Check before use is working. 3.1 Checking mains voltage 4. Preparing machine The machine is set for the c
Résumé du contenu de la page N° 9
When you switch on the machine or press any key, the cup illumi- HARDNESS German water hardness 16 – 23° nation is activated for 3 minutes. To switch on the cup illuminati- LEVEL 3: French water hardness 28.64 – 41.14° on, with the machine switched off, press any key. HARDNESS German water hardness 24 – 30° LEVEL 4: French water hardness 42.96 – 53.7° 5. Rinsing the machine The machine is adjusted to hardness level 3 before it leaves the RINSE UNIT factory. You can alter this setting by follow
Résumé du contenu de la page N° 10
Pull down cartridge mounting, until it engages audibly. Empty water tank and pull up cartridge mounting. Pressing lightly, place the filter cartridge in the water tank (Fig. 2). Fill water tank with cold, fresh tap-water and replace it. Pull down cartridge mounting, until it engages audibly. Switch the machine on by pressing key ON/OFF. Fill water tank with cold, fresh tap-water and replace it. P Open front cover (3) and press key until you hear an acoustic signal. Switch the mac
Résumé du contenu de la page N° 11
8.1 Drawing off powder coffee 10. Drawing off steam Impressa S9 Open cover (3) Steam can be used for heating liquids. Make sure that the steam/frothing nozzle is pushed upwards when liquids are Press selector key for pre-ground powder coffee . heated. Push down the frothing aid to froth liquids. FILL POWDER Now put 1 or 2 level measuring spoons of pre-ground coffee into 11. Frothing up milk with the Auto-Cappuccino the pre-ground powder funnel (14). Your machine is ready for frothing up
Résumé du contenu de la page N° 12
With the flow-adjustment you can set the optimum frothing. Fill water in a jug and immerse the intake-tube in the water. Now Turn the handle slightly to the right or to the left until you draw off steam until the water/steam mixture flowing into your cup obtain the required result. is completely clean. Your Auto-Cappuccino is clean again. 11.3 Drawing off hot milk using 12. Switching off machine the Auto-Cappuccinatore S9 When the machine is switched off, the rinsing program is auto- matically r
Résumé du contenu de la page N° 13
13.1 Programming powder quantity The selected value is confirmed Now your machine prepares a coffee. Switch the machine on by pressing ON/OFF key . P ENOUGH COFFEE? / PRESS KEY Press key P until you can hear an acoustic signal. P + OK? - ·········· II ·········· POWDER QUANTITY / SELECT KEY P When the required water quantity is reached press key . You Now press the key that you want to programme. Use the key for + can call up the next setting by pressing key . 1 cup only. The
Résumé du contenu de la page N° 14
The required portion of tea-water is programmed now. You can programme your machine to “economy mode“. In the set- ting ECONOMY MODE ON the steam heating-system is switched + By pressing the button, you can select the next phase, or off. The heating for the cup warming tray is switched off too. If press the N button in order to leave the programming. you want to draw off steam you need to press the steam key , warning lamps flash and your machine heats up. 13.6 Programming Filter After 10 mi
Résumé du contenu de la page N° 15
13.10 Programming automatic switch on time It is not possible to call up hot water and steam supplies. A programming of the timer clock is necessary if an automatic switch on is needed. 13.13 Programming language selection UNIT ON —.— P Press key Press key P . + - By briefly pressing key or call up the language desired + By briefly pressing key or - you can set the hours and then P and then confirm by pressing key . P confirm by pressing key . + By pressing the button, you can sele
Résumé du contenu de la page N° 16
14.2 Empty grounds container Remove any remaining beans with a vacuum cleaner. Put the spanner on (Fig.7). Coffee grounds are collected in the grounds container. Now turn spanner anticlockwise until the foreign object loosens. EMPTY GROUNDS Remove remaining powder with a vacuum cleaner. If this message shows on the display no more coffee can be drawn off. It is necessary to empty the grounds container. Replace bean container and fasten screws. Remove drip tray carefully as there
Résumé du contenu de la page N° 17
14.9 General cleaning instructions 15. Cleaning Never use abrasive articles or corrosive chemicals to clean your The machine has an integrated cleaning program. The procedure machine. lasts about 15 minutes. Please use Jura cleaning tablets only. These are available from your Wipe down the casing inside and out using a soft, damp cloth. Jura dealer. Clean the pivoting nozzle after every use. After warming milk, draw off some hot water to clean the It is essential not to interrupt the pr
Résumé du contenu de la page N° 18
Run the decalcifying program only after the machine has PRESS CALC been switched off for at least 5 hours and has cooled down UNIT DECALCIFYING / PLEASE WAIT completely. The running decalcifying program must not be CLOSE TAP interrupted. UNIT DECALCIFYING / PLEASE WAIT If using acidic decalcifying agents be sure to immediately re- Inside the machine the decalcifying agent is conducted to the move any splashes and drops from delicate surfaces, especi- drip tray. ally natural stone and w
Résumé du contenu de la page N° 19
17. Disposal For correct disposal, you should return your coffee machine to your dealer, Jura service centre or Jura Elektroapparate AG. 18. Tips for a perfect coffee Height adjustable coffee-spout You can adjust the height of the coffee-spout to the size of your cups. Grinding Please refer to chapter 3.4 “Adjusting grinder“. Pre-warm cups You should warm cups in advance with hot water or steam. The smaller the quantity of coffee, the more important warming the cups is. Sugar and cream Warmth is
Résumé du contenu de la page N° 20
19. Messages Cause Action FILL WATER Water tank is empty Top up with water Water level indicator in tank is jammed Empty tank, rinse out, fill up and replace Tank is calcified, water level indicator is stuck Remove tank, decalcify, rinse well, fill up with water and replace FILL BEANS Bean container is empty Top up with beans Message still displayed, although beans filled Draw off cup of coffee. FILL BEANS message only disappears after coffee is drawn off A foreign object is stuck in the grinde
