Résumé du contenu de la page N° 1
JLBICM 01
Coffee machine
Instruction manual
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
Important Safety Information It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety. You MUST read them c
Résumé du contenu de la page N° 4
During use For installation and servicing Keep this instruction manual together with the machine for any future reference. If the machine is sold or transferred to another person, make sure that this instruction manual is given to the new user, so that he/she can become familiar with the machineÊs functions and with the recommendations given. • This machine must be installed and connected to the mains by a COMPETENT PERSON. Make sure that the machine is DISCONNECTED from the powe
Résumé du contenu de la page N° 5
Contents For the User For the Installer 1 Important safety information Installation 5 • Building-in 5 4 Description of the coffee machine • Components for the installing the machine 5 10 The control panel • touch controls 5 10 • Electrical connection • Installing the machine 7 11 Instruction for the first use • filling up the water reservoir 11 Technical specifications 9 • hardness of water 11 Electrical connection 9 • filling up the container with coffee beans 11 • Permanent connection
Résumé du contenu de la page N° 6
Description of the Appliance 1. Water reservoir 2. Brita filter 3. Coffee Outlet 4. Steam/water nozzle 5. Drip tray 6. Coffee beans container 7. Grinding regulation knob 8. Control panel 9. „Used‰ coffee drawer 4
Résumé du contenu de la page N° 7
Installation Building-in Installing the machine into kitchen furniture with proper characteristics will ensure a correct operation of the equipment. Complying with the safety rules, ensure a proper protection against any contact with the electric components and with the parts protected only by functional insulation, by housing the machine correctly into the furniture. All components that guarantee protection, even a cover panel (for instance, when the machine is positioned at one of t
Résumé du contenu de la page N° 8
• Unscrew the cable clamp available on the machine. • Fix the power cable onto the machine as shown in the figure. • Connect the power cable as shown in the figure. This machine is designed for a single phase voltage of 230V. The power supply requires only outlets of 13A fuse and a double pole isolation switch with at least 3 mm between contacts. 6
Résumé du contenu de la page N° 9
Installing the machine • Lay the U base plate of the machine on the shelf of the cabinet. • Insert the L plates, compensating for any space. The width of the housing unit the coffee machine depends on the thickness of the cabinetÊs sides. six side plates (four being 2 mm thick and two 1 mm thick) are provided to compensate for the different possible measures. • They should be used to compensat
Résumé du contenu de la page N° 10
• Fix the U base plate inserting 4 self-threading screws into the 4 front holes of the same plate. Then screw the telescopic runners to each side with the remaining 8 self-threading screw. • Insert the machine into the housing by coupling the machine to the runners fixed to the sides of the carcass. • Slide the machine into the cabinet until the „click‰ indicates that it is locked into Position.
Résumé du contenu de la page N° 11
Technical specifications Width 594 mm Depth 475 mm Height 378 mm Capacity of water reservoir 2.5 l Net weight 28 kg Gross weight 31 kg Supply voltage 230 V Rated power 2000 W Power absorbed by the heating element 1700 W Power absorbed by the pump 50 W Working pressure 12 bar Fuse 13 A Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING: THIS APPLIANCE MUSTBE EARTHED. Shoul
Résumé du contenu de la page N° 12
The control panel 1. Water refill indicator 2. ON-OFF/stand-by indicator 3. Start indicator 4. Hot water selector indicator 5. Steam selector indicator 6. Light selector indicator 7. Espresso coffee indicator 8. Regular coffee indicator 9. Used Coffee 'drawer full' indicator 10. ON-OFF/stand-by control 11. Start control 12. Hot water selector control 13. Steam selector control 14. Light selector control 15. Espresso coffee control 16. Regular coffee
Résumé du contenu de la page N° 13
Instructions for the first use Filling up the water reservoir • Squeeze together the unlocking levers found under the drip tray • Gently pull the coffee machine forward from the housing by sliding it along the telescopic runners. Hardness of water: • Before filling up the water reservoir, make sure that the decalcifying Brita filter has been soaked in cold water for at l
Résumé du contenu de la page N° 14
• Remove the reservoir and fill it with approximately 2.5 litres of water as shown. • replace the water reservoir in its own housing tankig care to fully engage the water valve into the docking station. • Ensure the mains ON/OFF switch(at rear) is ON • push the machine back into the housing until a „CLICK‰ can be heard. This indicate that the machine has been locked in position.
Résumé du contenu de la page N° 15
Filling up the container with coffee beans • Press the unlocking levers located under the drip tray and pull the machine as it is shown in the figure. • pull the coffee machine forward from the housing along the telescopic runners . • Pour approximately 200 g of coffee beans into the container on the top as shown
Résumé du contenu de la page N° 16
• Push the machine back into the housing until a „CLICK‰ can be heard. This indicate that the machine has been locked in position. Initial start-up • Put the main switch in position 1 • The led corresponding to the ON-OFF control will blink rapidly for 3 minutes. • The machine is be in stand-by mode when the ON-OFF LED is blinking slowly, it is then ready to be switched on. • Ensuring the water reservoir an
Résumé du contenu de la page N° 17
Adjusting the texture ground coffee CAUTION This machine is calibrated in the factory for an optimum level of ground coffee. Too „coarse‰ ground coffee will result in a weaker coffee. Too „fine‰ ground coffee will result in very strong coffee, delivered by „drops‰ and tasting „bitter‰. The time required for an espresso will range from 20-30 seconds. • Press the unlocking levers available under the drip tray and pull the machine as shown in the figure.
Résumé du contenu de la page N° 18
• Push the machine back into the housing until a „click‰ can be heard. This indicates that the machine is locked in position. Stand-by mode • Once powered and inserted into the cabinet, the machine is in stand-by mode: this will be signaled by the on/off LED blinking. • Press the start control to switch on the machine: the start LED will be illuminated. • To come back to the stand-by mode, press the start control once again. CAUTION: On st
Résumé du contenu de la page N° 19
Making coffee • Press the control corresponding to the desired selection. • Press the start control within 10 seconds and the machine will make the coffee selected. • The machine will stop automatically CAUTION: the desired function will be disabled if the start control is not pressed within 10 seconds. It will then be necessary to repeat the procedure. HOW TO OBTAIN AN EXCELLENT ESPRESSO • The brewing time for an excellent espresso will be about 15 - 25 s
Résumé du contenu de la page N° 20
Hot water • The steam/water pipe can be moved to the back of the cabinet when not in use. Pull forward when required. CAUTION: Do not touch when HOT! • To dispense hot water, place a container under the steam/water nozzle; then press the water control. • Press and hold the start control within 10 seconds until the desired amount is dispensed. To stop the water flowing, simply release the control. CAUTION: the desired function will
