Résumé du contenu de la page N° 1
MODEL W1764
1/8 HP P OWER f EED ER
OWNER'S MANUAL
Phone: (360) 734-3482 • Online Technical Support: tech-support@shopfox.biz
COPYRIGHT © JUNE, 2007 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION O f THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR f ORM WITHOUT
THE WRITTEN APPROVAL O f WOODSTOCK INTERNATIONAL, INC.
#9695CR Printed in Taiwan
Résumé du contenu de la page N° 2
This manual provides critical safety instructions on the proper setup, operation, maintenance and service of this machine/equipment. Failure to read, understand and follow the instructions given in this manual may result in serious personal injury, including amputation, electrocution or death. The owner of this machine/equipment is solely responsible for its safe use. This responsibility includes but is not limited to proper installa- tion in a safe environment, personnel training and usag
Résumé du contenu de la page N° 3
INTRODUCTION SAFETY ELECTRICAL SET UP OPERATIONS MAINTENANCE SERVICE PARTS Contents INTRODUCTION ...................................... 2 Test Run .......................................... 16 Woodstock Technical Support ..................2 OPERATIONS ........................................ 17 SAFETY ................................................ 6 General .......................................... 17 Standard Safety Instructions ...................6 MAINTENANCE ..............................
Résumé du contenu de la page N° 4
W1764 Power Feeder INTRODUCTION Woodstock Technical Support This machine has been specially designed to provide many years of trouble-free service. Close attention to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation. Woodstock International, Inc. is committed to customer satisfaction. Our intent with this manual is to include the basic information for safety, setup, operation, maintenance, and service of this product. We stand behind our mach
Résumé du contenu de la page N° 5
INTRODUCTION W1764 Power Feeder M ACHINE MACHINE SP ECIf ICA TION S SPECIFICATIONS Phone #: (360) 734–3482 • Online Tech Support: tech–support@shopfox.biz • Web: www.shopfox.biz MODEL W1764 SMALL POWER FEEDER Motor Type ................................................................................................ Universal Variable Speed Horsepower .............................................................................................................. 1/8 HP Voltage ...................
Résumé du contenu de la page N° 6
W1764 Power Feeder Shipping Dimensions Type ................................................................................................................. Cardboard Content ................................................................................................................. Machine Weight .................................................................................................................... 27 lbs. Length/Width/Height ..................................................
Résumé du contenu de la page N° 7
INTRODUCTION W1764 Power Feeder Controls and Features Rotation Horizontal Position Position Lock Lever Lock Lever Dust Port 1 ⁄8 HP Motor Vertical Position Lock Lever Horizontal Movement Crank Power Feeder Handle Ball Joint Lock Handle Figure 1. Controls and Features. -5-
Résumé du contenu de la page N° 8
W1764 Power Feeder SAFETY READ MANUAL BEFORE OPERATING MACHINE. FAILURE TO FOLLOW INSTRUCTIONS BELOW WILL RESULT IN PERSONAL INJURY. Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. This symbol is used to alert the user to
Résumé du contenu de la page N° 9
SAFETY W1764 Power Feeder 10. NEVER LEAVE WHEN MACHINE IS RUNNING. Turn power off and allow all moving parts to come to a complete stop before leaving machine unattended. 11. DO NOT USE IN DANGEROUS ENVIRONMENTS. DO NOT use machinery in damp, wet locations, or where any flammable or noxious fumes may exist. 12. KEEP WORK AREA CLEAN AND WELL LIT. Clutter and dark shadows may cause accidents. 13. USE A GROUNDED EXTENSION CORD RATED FOR THE MACHINE AMPERAGE. Undersized cords over- heat and lose
Résumé du contenu de la page N° 10
W1764 Power Feeder Additional Safety for Power Feeders READ and understand this USE this and other machinery with caution entire instruction manual and respect. Always consider safety first, before using this machine. as it applies to your individual working Serious personal injury conditions. No list of safety guidelines can may occur if safety and be complete—every shop environment is operational information is different. Failure to follow guidelines could not understood and fol- r
Résumé du contenu de la page N° 11
ELECTRICAL W1764 Power Feeder ELECTRICAL The machine must be properly set up before it is safe to operate. DO NOT connect this machine to the power source until instructed to do so in the "Test Run" portion of this manual. 110V Operation The Model W1764 is wired for 110V operation. We recom- mend connecting this machine to a dedicated circuit with Figure 2. 5-15 plug and receptacle. a verified ground, using the circuit size below as a mini- mum. Never replace a circuit breaker with one of hig
Résumé du contenu de la page N° 12
W1764 Power Feeder SETUP Unpacking This machine has been carefully packaged for safe trans- portation. If you notice the machine has been damaged during shipping, please contact your authorized Shop Fox dealer immediately. Inventory Keep machine disconnected from The following is a description of the main components power until instructed otherwise. shipped with the Model W1764. Lay the components out to inventory them. Note: If you can't find an item on this list, check the mounting loca
Résumé du contenu de la page N° 13
SETUP W1764 Power Feeder Machine Placement Cleaning Machine • Table Load: This power feed distributes Some unpainted parts of your power feed may a heavy load in a small footprint. Some be coated with oil or a waxy grease that pro- machine table tops may require additional tects them from corrosion during shipment. bracing or clamps for correct support. Clean this oil or grease off with a solvent clean- er or citrus-based degreaser. DO NOT use chlo- • Working Clearances: Consider existing and
Résumé du contenu de la page N° 14
W1764 Power Feeder Assembly To correctly position this power feeder on your table top, T-Handle completely assemble the power feeder first, then refer to Base Mounting on Page 15. The reason for this order, is that with the power feeder unit completely assembled, it will be easier to locate where on the table top you will need to drill your base mounting holes, so you can take advantage of the full range of power feeder swing and Elbow adjustments. Clamp To assemble the power feeder, do
Résumé du contenu de la page N° 15
SETUP W1764 Power Feeder 9. Place the arm into the arm bracket so the teeth of Arm Bracket the gear and arm mesh as shown in Figure 8. Arm Note: No lubrication is required for the gear or rack teeth. Oil or grease will gather debris making the horizontal adjustment of the power feeder difficult. 10. Secure the arm bracket cover onto the arm bracket with three M10-1.5 x 35 hex bolts and washers (Figure 9). Note: Make sure that you do not tighten the hex bolts so much as to prevent the arm
Résumé du contenu de la page N° 16
W1764 Power Feeder 15. Lightly oil the T-handle threads shown in Figure 11. Note: No lubrication is required for the arm bracket Oil Threads and the elbow clamp connection. 16. Position the arm bracket onto the elbow clamp as shown in Figure 12. 17. Thread the T-handle into the elbow clamp so both assemblies are secure as shown in Figure 12. 18. Use the levers to lock the power feeder into posi- tion, such as the example shown in Figure 13. Figure 11. Arm bracket handle threads. Figure 12
Résumé du contenu de la page N° 17
SETUP W1764 Power Feeder Base Mounting To correctly position this power feeder on your table top, completely assemble the power feeder first, then refer this section and mount your base to the table using one of the three methods below. The reason for this order, is Bolt Feeder that with the power feeder unit completely assembled, it Base will be easier to locate where on the table top you will Flat Washer need to drill your base mounting holes, so you can take advantage of the full range
Résumé du contenu de la page N° 18
W1764 Power Feeder Test Run Complete this process once you have familiarized yourself with all instructions in this manual. If during the test run a source of an unusual noise or vibration is not readily apparent, contact our technical support for help at (360) 734-3482 or contact us online at tech-support@shopfox. biz. To test run the power feed, do these steps: Projectiles thrown from the machine could cause serious eye injury. Wear 1. Read the entire instruction manual first! safety gla
Résumé du contenu de la page N° 19
OPERATIONS W1764 Power Feeder OPERATIONS General This machine will perform many types of operations that are beyond the scope of this manual. Many of these operations can be dangerous or deadly if performed incor- rectly. The instructions in this section are written with the under- standing that the operator has the necessary knowledge and skills to operate this machine. If at any time you experience difficulties performing any operation, stop using the machine! READ and understand this en
Résumé du contenu de la page N° 20
W1764 Power Feeder MAINTENANCE General Regular periodic maintenance on your machine will ensure its optimum performance. Make a habit of inspecting your machine each time you use it. Check for the following conditions and repair or replace when necessary: • Loose mounting bolts. • Worn switch. • Worn or damaged cords and plugs. • Damaged wheel rubber. MAKE SURE that your machine is • Any other condition that could hamper the safe unplugged during all maintenance pro- operation of this mach
