Résumé du contenu de la page N° 1
OPERATOR’S
MANUAL
Front Tine Tiller
5.5 TP Front Tine Tiller
Mfg. No. Description
1695578 5521FT, 5.5 TP Front Tine Tiller
1695584 5521FT, 5.5 TP Front Tine Tiller
1695615
Revision A
Rev. Date 10/2008
TP10008988
OM5521FT
Not for
Reproduction
Résumé du contenu de la page N° 2
2 Not for Reproduction
Résumé du contenu de la page N° 3
Table of Contents MODEL IDENTIFICATION .......................................... 3 Start-up .................................................................. 10 11 Operating Speed .................................................... SAFETY RULES ......................................................... 4 Shutting Down ........................................................ 11 Owner's Responsibility ............................................. 4 Tilling ......................................
Résumé du contenu de la page N° 4
Safety Rules OWNER’S RESPONSIBILITY ! DANGER Accurate assembly and safe and effective use of the rototiller is the owner’s responsibility. DANGER INDICATES A SERIOUS INJURY OR FA- TALITY WILL RESULT IF THE SAFETY INSTRUC- Read and follow all safety instructions. TIONS THAT FOLLOW THIS SIGNAL WORD ARE NOT OBEYED. Carefully follow all assembly instructions. Maintain the tiller according to directions and schedule included in this Earthquake operator’s manual. Ensure that anyone who uses t
Résumé du contenu de la page N° 5
Safety Rules c. Fill fuel tank outdoors with extreme care. Never fi ll fuel tank indoors. IMPORTANT THE RIGHT AND LEFT SIDES OF YOUR d. Replace gasoline cap securely and clean up spilled fuel ROTOTILLER ARE DETERMINED FROM before restarting. THE OPERATING POSITION AS YOU Never attempt to make any adjustments while the engine is FACE THE DIRECTION OF FORWARD TRAVEL. running. ENGINE IS SHIPPED FROM FACTORY OPERATION WITHOUT OIL. YOU MUST ADD ENGINE OIL BEFORE STARTING ENGINE. Do
Résumé du contenu de la page N° 6
Safety Rules SAFETY DECALS This rototiller unit has been designed and manufactured to provide you with the safety and reliability you would expect from an industry leader in outdoor power equipment manufacturing. Although reading this manual and the safety instructions it contains will provide you with the necessary basic knowledge to operated this equipment safely and effectively, we have placed several safety labels on the tiller to remind you of this important information while you are ope
Résumé du contenu de la page N° 7
Unpacking and Assembly UNPACK TILLER AND ASSEMBLE IMPORTANT 1. Open top of carton and remove handlebar assembly. THE RIGHT AND LEFT SIDES OF YOUR ROTOTILLER ARE DETERMINED FROM 2. Find parts packet. Parts packet contains: THE OPERATING POSITION AS YOU 6- 5/16-18 x 1-3/4” bolts FACE THE DIRECTION OF FORWARD 6- 5/16” spring lockwashers TRAVEL. 2- hand knobs ENGINE IS SHIPPED FROM FACTORY 4- locknuts WITHOUT OIL. YOU MUST ADD ENGINE OIL BEFORE STARTING ENGINE. 2- 1/2” push nuts 1- dete
Résumé du contenu de la page N° 8
Features The advantage of the Simplicity/Snapper™ gear drive rototiller over other front tine tillers, is the exclusive un- folding and fl exible drag bar. This gives the gear drive tiller its stability and its versatility. For easy transport, fold the wheels under the engine. During operation, the wheels unfold back and the drag bar folds down. The long length between the tines and the drag bar make this the most comfortable front tine tiller on the market. drive safety control lever forward
Résumé du contenu de la page N° 9
Controls DRIVE SAFETY CONTROL LEVER ! CAUTION Engage tines into forward, releasing returns machine to neutral. THIS INFORMATION IS PROVIDED HERE ONLY TO Pulling down on drive safety control lever engages the tines. Releasing INTRODUCE THE CONTROLS. DO NOT START THE the drive safety control lever disengages the tines to a neutral ENGINE AT THIS TIME. STARTING AND OPERATING position. INSTRUCTIONS ARE GIVEN ON PAGE 10. PLEASE READ THIS SECTION AND ALL OPERATING AND BELT TENSION ADJUSTMENT SA
Résumé du contenu de la page N° 10
Operation PRE-START INSPECTION IMPORTANT 1. Make sure all safety guards are in place and all nuts and bolts ENGINE IS SHIPPED FROM FACTORY WITHOUT OIL. are secure. YOU MUST ADD ENGINE OIL BEFORE STARTING 2. Check oil level in engine crankcase. See your engine manual for ENGINE. procedure and specifi cations. PRACTICE OPERATING THE CONTROLS AND TILLER WITH TINES OUT OF GROUND BEFORE 3. Inspect air cleaner for cleanliness. See your engine manual for BEGINNING TO TILL. IT IS IMPORTANT THAT YO
Résumé du contenu de la page N° 11
Operation OPERATING SPEED ! WARNING For normal tilling, set the throttle lever to “fast”. EXTREME CAUTION MUST BE TAKEN IN SELECT- SHUTTING DOWN ING TILLING DEPTH. IF YOU ATTEMPT TO TILL TOO DEEPLY FOR SOIL CONDITIONS, THAT IS, To stop the engine at any time, move throttle control to the off position. WITH THE DRAG STAKE IN TOO HIGH A POSITION, To stop wheels and tines at any time, release the drive safety control LOSS OF CONTROL COULD RESULT. lever to the neutral position. IF REMOVING MATE
Résumé du contenu de la page N° 12
Maintenance MAINTENANCE SCHEDULE Your rototiller has been designed and produced by the industry’s leading manufacturer of outdoor power equipment to provide you with years of reliable operation. Keeping your tiller in top running condition will prolong its life, and help you obtain optimum performance. Please read this normal care schedule, and note the recommended care operating intervals to extend the life of your unit. Before 50 hours or Maintenance Operation Page Each Use Every Season Chan
Résumé du contenu de la page N° 13
Maintenance CHECK BELT TENSION ! WARNING Belt tension may decrease over time. It must be adjusted within the CHECK FORWARD BELT TENSION REGULARLY. fi rst half hour of operation, and checked after every two hours of TOO MUCH OR TOO LITTLE TENSION WILL CAUSE operation. Proper adjustment will assure long belt life. Too much or PREMATURE BELT FAILURE. too little belt tension will cause premature belt failure. To check and adjust the forward belt tension: 1. Turn off engine. Engine must be cool.
Résumé du contenu de la page N° 14
Maintenance ENGINE MAINTENANCE IMPORTANT Refer to the engine manual included in your parts packet for information on engine maintenance. Your engine manual provides ENGINE IS SHIPPED FROM FACTORY WITHOUT OIL. YOU MUST ADD ENGINE OIL BEFORE STARTING detailed information and a maintenance schedule for performing the ENGINE. following tasks: ENGINE CAN OVERHEAT AND BECOME DAMAGED 1. Check oil level before each use or after every 8 hours of IF DEBRIS BLOCKS THE COOLING SYSTEM OR operation. R
Résumé du contenu de la page N° 15
Maintenance PREPARE FOR STORAGE ! WARNING Follow the steps below to prepare your tiller for storage. Read your DO NOT STORE TILLER IN AN UNVENTILATED engine manual for detailed instructions on preparing the engine for AREA WHERE FUEL FUMES MAY REACH FLAME, storage. SPARKS, PILOT LIGHTS OR AN IGNITED OBJECT. DRAIN FUEL OUTDOORS AWAY FROM ANY 1. Protect wheels and axles from rust: IGNITION SOURCES. USE ONLY APPROVED FUEL - Coat the axles lightly with axle grease. CONTAINERS. 2. Drain fuel
Résumé du contenu de la page N° 16
Truobleshooting and Repair TROUBLESHOOTING GUIDE ! WARNING While normal care and routine maintenance will extend the life of your rototiller, prolonged or constant use may eventually require PRACTICE SAFETY AT ALL TIMES. ENGINE MUST BE TURNED OFF AND ALLOWED TO COOL, AND SPARK that service be performed to allow it to continue operating properly. PLUG WIRE MUST BE DISCONNECTED AND SECURED The troubleshooting guide below lists the most common problems, BEFORE ATTEMPTING ANY MAINTENANCE OR c
Résumé du contenu de la page N° 17
Technical Manuals Additional Technical Literature Available Additional copies of this manual are available, as well as fully illustrated parts lists. These manuals show all of the product’s components in exploded views (3D illustrations which show the relationship of parts and how they go together) as well as part numbers and quantities used. Important assembly notes and and torque values are also included. Technical manuals can be downloaded from: www.simplicitymfg.com www.snapper.com. 17
Résumé du contenu de la page N° 18
18 Not for Reproduction
Résumé du contenu de la page N° 19
19 Not for Reproduction
Résumé du contenu de la page N° 20
www.simplicitymfg.com www.snapper.com Briggs & Stratton Power Products Group, L.L.C. Copyright © 2008 Briggs & Stratton Corporation Milwaukee, WI USA. All Rights Reserved www.BRIGGSandSTRATTON.com Not for Reproduction
