Résumé du contenu de la page N° 1
Express Cordless
Kettle
USE AND CARE GUIDE FOR
MODEL MEK1, MEK15
Résumé du contenu de la page N° 2
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against fire, electric shock and injury to persons do not immerse cord, plugs, or appliance in water or other liquid. 4. Close supervision is necessary when any appliance is used by or near children. 5. Unplug from outlet when not in use and before cleaning. Allow to cool bef
Résumé du contenu de la page N° 3
ADDITIONAL IMPORTANT SAFEGUARDS WARNING: This appliance generates heat and escaping steam dur- ing use. Use proper precautions to prevent the risk of burns, fires, or other injury to persons or damage to property. 1. All users of this appliance must read and understand this Use and Care Guide before operating or cleaning this appliance. 2. The cord to this appliance should be plugged into a 120V AC electrical outlet only. 3. Use water only in this appliance! Do not put any other liquids or food
Résumé du contenu de la page N° 4
Polarized Plug This appliance has a polarized plug (one blade is wide than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified elec- trician. Do not attempt to modify the plug in any way. SHORT CORD INSTRUCTIONS A short power-supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a
Résumé du contenu de la page N° 5
a. Figure 1 e. a. Lid Release b. b. Indicator Light c. ON/OFF “START” Lever d. Power Base MEK1 (P/N 30774) MEK15 (P/N 31013) e. Scale Filter (P/N 30775)) c. d. Your new Electric Kettle is designed to heat water only. Do not put any food or beverage into the kettle. Before Using Your Express Kettle Thoroughly clean your Kettle before using. Fill the Kettle to its maximum capacity (1 or 1.5 litres depending on model) with water and boil. See boiling instructions. When the unit shuts off, discard t
Résumé du contenu de la page N° 6
3. Raise the ON/OFF Lever into the OFF position. 4. Open the Lid by pulling back on the Lid Release. Fill the Kettle with the desired amount of water. Close the Lid and wipe excess water off the Kettle. NOTE: If the Lid is not properly closed, the Kettle will not auto- matically shut off. 5. Place the Kettle on the Power Base, engaging the connector into the bottom of the Kettle. Be careful not to spill any water onto the Power Base. 6. Plug the Power Base into 120V ~ 60 Hz electrical outlet. 7.
Résumé du contenu de la page N° 7
5. To remove any discoloration from inside the Kettle, rub baking soda on a damp cloth over the metal. Rinse thoroughly and dry. NOTE: Mineral deposits can form a coating inside the Kettle and may cause an off flavor in the water or lengthen the boiling time. Use the following cleaning method: 6. In a bowl, mix a diluted solution of one part vinegar to four parts water and pour into Kettle. Do not boil the solution in the Kettle, as it may damage the Kettle. 7. Allow Kettle to soak for 30 minute
Résumé du contenu de la page N° 8
LIMITED ONE YEAR WARRANTY ® Warranty: This Melitta product is warranted by Salton, Inc. to be free from defects in materials or workmanship for a period of (1) year from the original purchase date. This product warranty covers only the original consumer purchaser of the product. Warranty Coverage: This warranty is void if the product has been damaged by accident in shipment, unreasonable use, misuse, neglect, improper service, commercial use, repairs by unauthorized personnel, normal wear and te
Résumé du contenu de la page N° 9
For Products Purchased in the USA, but Used in Canada: You may return the product insured, packaged with sufficient protection, and postage and insurance prepaid to the USA address listed below. Please note that all customs duty / brokerage fees, if any, must be paid by you and we will require you to pay the cost of customs duty / brokerage fees to us in advance of our performing any service. Risk During Shipment: We cannot assume responsibility for loss or damage during incoming shipment. For y
