Résumé du contenu de la page N° 1
powerdriveinverters.com
Owner’s Guide
Please Save for Future Reference
2000 Watt
DC to AC
2000
Power Inverter
Résumé du contenu de la page N° 2
Thank you for purchasing the POWERDRIVE2000 power inverter, a high performance solution to using household power while on the road. Please read and understand all of the information provided in this manual before operating or installing. If properly used, the inverter will give you years of reliable service providing AC power for TVs, computers, appliances, stereos and power tools. For safe and optimum performance, the inverter must be installed and used properly. Carefully read and follow th
Résumé du contenu de la page N° 3
CAUTION: DO NOT connect the RPPD2000 to live AC power circuits. Damage to the inverter will result even if the power switch is in the OFF position. DO NOT connect any AC device which has its neutral conductor connected to ground. DO NOT expose the RPPD2000 to air temperatures in excess of 104°F. DO NOT use the RPPD2000 on the following items: 1. Small battery-operated appliances such as flashlights, razors and nightlights that can be plugged directly into an AC outlet to recharge. 2. Certain ba
Résumé du contenu de la page N° 4
INSTALLATION: Selecting a suitable location The RPPD2000 must be installed in an area that meets the following requirements in order to operate safely and provide optimum performance: 1. DRY: DO NOT expose the unit to moisture. 2. COOL: Ambient air temperature should be between 32°F and 104°F. Cooler areas are best. 3. VENTILATION: Allow at least 4 inches of clearance above and around all sides and top of the unit for proper cooling. 4. SAFE: DO NOT install the RPPD2000 in a compartment with bat
Résumé du contenu de la page N° 5
Connect the Power Cables to the Inverter: Connect cable to the Power Input Terminals on input end of the inverter. The red terminal is positive (+) and the black terminal is negative (-). Unscrew the terminal on the inverter and install the appropriate color (black to black and red to red) ring-terminal of the cables and tighten the screws to clamp the wires securely. NOTE: It is a good idea to check and tighten these screws from time to time. They can become loose by vibrations or thermal cycli
Résumé du contenu de la page N° 6
CAUTION: Never disconnect the DC cables from the inverter without first disconnecting the cables from the battery or potentially lethal electricity will be left exposed. NOTE: The Power Button turns the control circuit in the inverter on and off. It does not disconnect power from the inverter. When the button is in the off position, the inverter draws no current from the battery. When it’s in the on position, but no power is being supplied to a load, the inverter draws less than ½ amp from the
Résumé du contenu de la page N° 7
Low Voltage Protection: If the DC input voltage drops below the alarm threshold of 10.5V the meter will flash (LUP) to indicate Low Voltage Protection, but the unit will continue to operate. If the input voltage drops to 10.0V or less, the inverter will shut down to protect itself, the meter will continue to flash (LUP), and an alarm will sound. To restore normal operation, return the DC input voltage to at least 12V. The inverter will automatically return to normal operation. High Voltage Prote
Résumé du contenu de la page N° 8
NOTE: The wattage rating applies to resistive loads. The inverter will operate most AC loads within its power rating. Some induction motors used in freezers, pumps, and other motor-operated equipment require very high surge currents to start. The inverter may not be able to start some of these motors even though their rated current draw is within the inverter’s limits. Operating time will vary depending upon the type, capacity charge level of the battery, and the power draw of the AC products y
Résumé du contenu de la page N° 9
T To o c ca allc cu ulla at te e t th he e t to ot ta all w wa at tt t- -h ho ou ur rs s o of f e en ne er rg gy y c co on ns su um mp pt tiio on n: : Multiply the power by the operating time. To determine how many 12-volt amp hours will be consumed, divide the watt hours by 10. Example: 150 Watts x 1 Hour = 150 Watt Hours 150 Watt Hours ÷ 10 = 15 12 Volt Amp Hours E Es st tiim ma at te ed d W Wa at tt ts s U Us se ed d b by y C Co om mm mo on n A Ap pp plliia an nc ce es s a an nd
Résumé du contenu de la page N° 10
Problem/SymptomPossible Causes Solution Low output voltage Overloaded Reduce the load. No output voltage Low input Recharge battery. Red LED illuminated Voltage Check connections and cable. Alarm sounding Continuous operation input current required. Thermal shutdown Overloaded Allow inverter to cool off. Reduce load. Improve ventilation; make sure ventilation openings in the inverter are not obstructed. Reduce ambient temperature. No output voltage High input Make sure the inverter is Red LED
Résumé du contenu de la page N° 11
This Limited One Year Warranty from POWERDRIVE, a DAS brand, applies to all electronic products and devices manufactured by DAS Distributors and sold under the brand name POWERDRIVE. Terms of the Warranty: POWERDRIVE warrants that the product you have purchased from a DAS authorized retailer is free from defects in materials and workmanship under normal use during the warranty period. The warranty period begins on the day of retail sale. This warranty extends only to the original purchaser. It i
Résumé du contenu de la page N° 12
1875 Zeager Road, Elizabethtown, PA 17022 © POWERDRIVE
