Résumé du contenu de la page N° 1
INSTRUCTION
MANUAL
®
Rise & Shine Deluxe
®
Natural Alarm Clock Bedside Lamp
VA02
Résumé du contenu de la page N° 2
IMPORTANT SAFETY INSTRUCTIONS CAUTION: TO REDUCE THE RISK OF ELECTIC SHOCK, DO NOT REMOVE ANY COMPONENTS. THERE ARE NO SERVICEABLE PARTS INSIDE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the system enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The ex
Résumé du contenu de la page N° 3
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions – before using this lamp. 2. Keep these instructions – for future reference. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this lamp in damp/humid or wet locations. 6. For indoor use only. 7. Clean only with dry cloth. 8. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 9. Do not place near any heat sources such as radiators, heat registers, stoves, or other apparatus (inc
Résumé du contenu de la page N° 4
Power Supply (AC Adapter) Precautions WARNING: To reduce risk of AC adapter (power supply) failure: • Avoid placing the AC adapter near heat sources or in direct sunlight. • Keep AC adapter out of reach of small children. • Do not allow water, moisture or foreign objects near the AC adapter. • Do not cover the AC adapter with any objects. CAUTION: Always use the power adapter supplied with this product. Do not use any other adapter. Lamp could become damaged, and warranty would become void. Ba
Résumé du contenu de la page N° 5
General Precautions • Avoid placing this lamp and AC adapter in areas that are exposed to direct sunlight or close to heat-radiating products, such as heaters. Do not place the lamp or AC adapter on the top of appliances that radiate heat. • Avoid placing the lamp in areas that are dusty, humid/moist, and lack ventilation, or are subject to constant vibration. • Not for use with light dimmers, timers, motion detectors or extension cords. • Do NOT use lubricating agent in bulb assembly. • Close s
Résumé du contenu de la page N° 6
General Precautions This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against ha
Résumé du contenu de la page N° 7
Set-Up Instructions Unpacking Please check the shipping carton for the following items: Shade Bulb AC Adapter Lamp Housing Pillow Speaker *If applicable Battery Compartment (under the lamp) Selecting a location ® ® ® • Place your Verilux Rise & Shine Natural Alarm Clock Bedside Lamp on a table or other flat surface near your bedside. ® • For best performance, place your Rise & Shine Natural Alarm ® Clock Bedside Lamp within two feet of a wall, and avoid placing directly in a corner. ® ® Note: Av
Résumé du contenu de la page N° 8
Set-Up Instructions IMPORTANT – Installation of batteries, while not required, is recommended prior to installation of the shade and bulb. Installation of batteries is required for backup operation. Inserting batteries for backup ® ® In the event that the Rise & Shine Natural Alarm Clock Bedside Lamp loses power, the clock time and alarm settings are stored in backup memory for up to 48 hours. 1. Open the battery door located on the bottom of the lamp (do not remove screw located adjacent to ba
Résumé du contenu de la page N° 9
Set-Up Instructions Connecting the AC Adapter 1. Plug the AC adapter cable into the back of the power connector labeled DC 12V/5A (see A). 2. Plug the power supply cord into the AC adapter, (see B) and then into an AC wall outlet (see C). Note: When AC adapter is plugged in, the lamp will not draw any power from the batteries. WARNING: The AC adapter should be situated so that its location or position does not interfere with its proper ventilation. For example, the AC adapter should not be situa
Résumé du contenu de la page N° 10
Display and Controls Light Switch ON/Off & Dimming Radio ON/OFF Nature Sounds Tuner Dial ON/OFF Radio Display AM/FM Display Dim High/Low Color Mode Programming Buttons Volume Wake Alarm Options Sleep Snooze/Alarm Reset (Sound, Light) Alarm Options (5,15,30,60 minutes) IMPORTANT – This lamp may be sensitive to high levels of static electricity. If the lamp powers off or the display becomes irregular, reset by unplugging the power cord for a minimum of 15 seconds. 10
Résumé du contenu de la page N° 11
Clock Setting IMPORTANT – Before setting the time, confirm that the WAKE alarm setting is off - Light, Sounds lights must be OFF Setting the clock 1. Press & hold the SET button until the HOUR begins to flash, then release. 2. To set the HOUR, press the ▼ or ▲ button until you have reached the desired hour. To confirm, press the SET button – the SET MINUTE flashes. Note: For faster clock mode settings, press and hold the ▼ or ▲ button. 3. To set the MINUTE, press the ▼ or ▲ button until you have
Résumé du contenu de la page N° 12
Alarm Setting Setting the WAKE alarm ® ® The Rise & Shine Natural Alarm Clock Bedside Lamp allows you to wake gradually, using one of the pre-set wake time delay cycle options (5, 15, 30, 60 minutes), in combination with energizing Light, Sounds, or a combination of Light and Sound. Example: Alarm Time = 6:30am Alarm Options = Sounds (TOWN) and Light Wake Time Cycle = 30 minutes MIN The alarm will begin at 6:00am (because of 30 minute time delay cycle). The sounds and light will start at a
Résumé du contenu de la page N° 13
Alarm Setting SELECTING THE ALARM TIME 1. Press & hold the SET button until the HOUR begins to flash, then release. 2. To set the alarm HOUR, press the ▼ or ▲ button until you have reached the desired hour. To confirm, press the SET button – the MINUTE flashes. Note: For faster clock mode settings, press and hold the ▼ or ▲ button. 3. To set the alarm MINUTE, press the ▼ or ▲ button until you have reached the desired minute. To confirm, press the SET button - the AM/PM flashes. 4. To set the al
Résumé du contenu de la page N° 14
Snooze/Alarm Reset Using the SNOOZE/RESET function There are three ways of switching off the alarm – (Snooze, 24 Hour Alarm Reset, Canceling the Alarm.) However, if the alarm is not turned off after at the end of the alarm cycle, it will continue to operate for approximately 30 minutes (then turn off automatically). 1. SNOOZE This restarts your alarm cycle after a 9-minute interval. • To activate, during the alarm, tap SNOOZE/RESET button. Note: alarm will begin again at the dimmest/quietest s
Résumé du contenu de la page N° 15
Sleep Function Using the SLEEP function ® The Rise & Shine Natural Alarm ® Clock Bedside Lamp allows you to fall asleep gradually, using one of the pre-set Sleep Time Cycles (5, 15, 30, 60 minutes). When using this feature, the volume of the sound and/or brightness of the light will gradually decrease over the set Sleep Time Cycle, allowing you to fall asleep gently. • First turn on the desired Radio, Sound, or Light function. Then, press the SLEEP button until you have reached the desired Sl
Résumé du contenu de la page N° 16
Sounds Function Using the SOUNDS function ® The Rise & Shine Natural Alarm SOUNDS RADIO ® Clock Bedside Lamp allows you to listen to 8 pre-programmed nature sounds at any time: • Birds • Harbor • Town • Brook • Surf • Forest • Rain • Wind 1. To listen to sounds at any time, press the SOUNDS button. 2. To change sounds, press the ▼ or ▲ button. 3. To change the volume, press the + or - button. 4. To turn sounds OFF, press the SOUNDS button again. Radio Function Using the RADIO fun
Résumé du contenu de la page N° 17
Color Mode Function Using the COLOR MODE function The lamp features a Color Changing Display that can be set to fade between seven different colors or locked on one color. SEVEN COLOR FADE • This is the default setting. When the lamp is first plugged in the backlight is set to seven color fade mode. SINGLE COLOR • To select a single color, press the COLOR MODE button when the color you prefer is displayed (stops the color fade cycle). • Press the COLOR MODE button again to repeat fade cycle and
Résumé du contenu de la page N° 18
Please visit our web site at: www.Verilux.com Call our Customer Service Department at 1-888-544-4865 ? 340 Mad River Park, Waitsfield, VT 05673 Printed in China for: Verilux, Inc. © Copyright 2007 Verilux, Inc. All rights reserved. VA02-MAN-Rev5
